The DOI matches its Crossref record; its reference list is not available.
Crystallization of poly(ethylene oxide) in i-polypropylene-poly(ethylene oxide) blends
Abstract
The thermal degradation of poly(methyl methacrylate) (PMMA) in the presence of polysulfide polymers, namely, poly(styrene disulfide) (PSD) and poly(styrene tetrasulfide) (PST) was studied using thermogravimetry (TG) and direct pyrolysis-mass spectrometric (DP-MS) analysis. Both PSD and PST were found to stabilize the PMMA degradation, which was explained by both radical recombination and a chain-transfer mechanism. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 66: 2149–2156, 1997
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“In fact, quenched films can exist either in a transparent or opaque state which is switched by cooling below the PEO domains crystallization temperature or above their melting temperature.The film can thus be written with a hot pen by melting the PEO droplets at around 60 °C.”
From Fractionated crystallization in semicrystalline polymers (2021) · cites this paper as [347]
In the citing paper
“For example, the fractionated crystallization of PEO domains below room temperature in an i-PP/PEO blend has been exploited to create rewritable thermosensitive plastic films [347] .”
From Fractionated crystallization in semicrystalline polymers (2021) · cites this paper as [347]
Citations
No citation lists for this paper
No citation lists for this paper yet — checked again daily.
Metadata
- Authors
- Kowalewski, T., Ragosta, G., Martuscelli, E., & Galeski, A.
- Venue
- Journal of Applied Polymer Science
- Published
- 1997
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Crystallization of poly(ethylene oxide) in i-polypropylene-poly(ethylene oxide) blends. https://app.cochat.ai/papers/10.1002/(sici)1097-4628(19971219)66:11
- The paper
- Kowalewski, T., Ragosta, G., Martuscelli, E., & Galeski, A. (1997). Crystallization of poly(ethylene oxide) in i-polypropylene-poly(ethylene oxide) blends. Journal of Applied Polymer Science. https://doi.org/10.1002/(sici)1097-4628(19971219)66%3A11
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
