The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
The integrated hydrologic model intercomparison project, IH‐MIP2: A second set of benchmark results to diagnose integrated hydrology and feedbacks
Open accessAbstract
Emphasizing the physical intricacies of integrated hydrology and feedbacks in simulating connected, variably saturated groundwater‐surface water systems, the Integrated Hydrologic Model Intercomparison Project initiated a second phase (IH‐MIP2), increasing the complexity of the benchmarks of the first phase. The models that took part in the intercomparison were ATS, Cast3M, CATHY, GEOtop, HydroGeoSphere, MIKE‐SHE, and ParFlow. IH‐MIP2 benchmarks included a tilted v‐catchment with 3‐D subsurface; a superslab case expanding the slab case of the first phase with an additional horizontal subsurface heterogeneity; and the Borden field rainfall‐runoff experiment. The analyses encompassed time series of saturated, unsaturated, and ponded storages, as well as discharge. Vertical cross sections and profiles were also inspected in the superslab and Borden benchmarks. An analysis of agreement was performed including systematic and unsystematic deviations between the different models. Results show generally good agreement between the different models, which lends confidence in the fundamental physical and numerical implementation of the governing equations in the different models. Differences can be attributed to the varying level of detail in the mathematical and numerical representation or in the parameterization of physical processes, in particular with regard to ponded storage and friction slope in the calculation of overland flow. These differences may become important for specific applications such as detailed inundation modeling or when strong inhomogeneities are present in the simulation domain.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated Soils
van Genuchten, M. T. (1980) · Soil Science Society of America Journal · doi:10.2136/sssaj1980.03615995004400050002x · Cited by 27,578
An Overview of CMIP5 and the Experiment Design
Taylor, K. E., Stouffer, R. J., & Meehl, G. A. (2012) · Bulletin of the American Meteorological Society · doi:10.1175/bams-d-11-00094.1 · Cited by 14,052
Cited by
Numerical Solution of Richards' Equation: A Review of Advances and Challenges
Farthing, M. W., & Ogden, F. L. (2017) · Soil Science Society of America Journal · doi:10.2136/sssaj2017.02.0058 · Cited by 412
Legacy, Rather Than Adequacy, Drives the Selection of Hydrological Models
Addor, N., & Melsen, L. A. (2019) · Water Resources Research · doi:10.1029/2018wr022958 · Cited by 286
Metadata
- Authors
- Kollet, S., Sulis, M., Maxwell, R. M., Paniconi, C., Putti, M., Bertoldi, G., Coon, E. T., Cordano, E., Endrizzi, S., Kikinzon, E., Mouche, E., Mügler, C., Park, Y., Refsgaard, J. C., Stisen, S., & Sudicky, E.
- Venue
- Water Resources Research
- Publisher
- American Geophysical Union (AGU)
- Published
- 2017-01
- Volume
- 53
- Issue
- 1
- Pages
- 867-890
- ISSN
- 0043-1397 (ISSN-L)
- 1944-7973
- OpenAlex
- W2563956511
- Cited by
- 174
- References
- 2
- FWCI
- 8.29
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.