The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Prognostics and Health Management of Electronics
Abstract
Reliability is the ability of a product or system to perform as intended (i.e., without failure and within specified performance limits) for a specified time, in its life‐cycle environment. Commonly used electronics reliability prediction methods (e.g., Mil‐HDBK‐217, 217‐PLUS, PRISM, Telcordia, FIDES) based on handbook methods have been shown to be misleading and provide erroneous life predictions. The use of stress and damage models permits a far superior accounting of the reliability and the physics of failure (PoF); however, sufficient knowledge of the actual operating and environmental application conditions of the product is still required. This article presents a PoF‐based prognostics and health management approach for effective reliability prediction. PoF is an approach that utilizes knowledge of a product's life‐cycle loading and failure mechanisms to perform reliability modeling, design, and assessment. This method permits the assessment of the reliability of a system under its actual application conditions. It integrates sensor data with models that enable in situ assessment of the deviation or degradation of a product from an expected normal operating condition and the prediction of the future state of reliability. This article presents a formal implementation procedure, which includes failure modes, mechanisms, and effects analysis, data reduction and feature extraction from the life‐cycle loads, damage accumulation, and assessment of uncertainty. Applications of PoF‐based prognostics and health management are also discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Prognostics and Health Management of Electronics
Pecht, M. G. (2008) · Wiley eBooks · doi:10.1002/9780470385845 · Cited by 847
Self-citationPrognostics and health management of electronics
Vichare, N. M., & Pecht, M. G. (2006) · IEEE Transactions on Components and Packaging Technologies · doi:10.1109/tcapt.2006.870387 · Cited by 433
Self-citationA life consumption monitoring methodology for electronic systems
Ramakrishnan, A., & PECHT, M. G. (2003) · IEEE Transactions on Components and Packaging Technologies · doi:10.1109/tcapt.2003.817654 · Cited by 172
Self-citationPredicting the reliability of electronic equipment
PECHT, M. G., & Nash, F. R. (1994) · Proceedings of the IEEE · doi:10.1109/5.293157 · Cited by 155
Self-citationPrognostics implementation of electronics under vibration loading
Gu, J., Barker, D., & PECHT, M. G. (2007) · Microelectronics Reliability · doi:10.1016/j.microrel.2007.02.015 · Cited by 116
Self-citationIn-situ sensors for product reliability monitoring
Mishra, S., PECHT, M. G., & Goodman, D. L. (2002) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.462807 · Cited by 114
Self-citation(2007) · Cited by 42
Methods for Binning and Density Estimation of Load Parameters for Prognostics and Health Management
Rodgers, P., & PECHT, M. G. (2006) · Cited by 36
Self-citationReliability prediction of electronic packages
Dasgupta, A., Barker, D. B., & PECHT, M. G. (2002) · Annual Reliability and Maintainability Symposium (RAMS) · doi:10.1109/arms.1990.67977 · Cited by 14
Self-citationThe Deep Impact Flight Software Architecture
Hess, R. F., & Torrez, J. (2006) · IEEE Aerospace Conference (AERO) · doi:10.1109/aero.2006.1656062 · Cited by 5
Cited by
Remaining useful life estimation – A review on the statistical data driven approaches
Si, X.-S., Wang, W., Hu, C.-H., & Zhou, D.-H. (2011) · European Journal of Operational Research · doi:10.1016/j.ejor.2010.11.018 · Cited by 2,162
An overview of time-based and condition-based maintenance in industrial application
Ahmad, R., & Kamaruddin, S. (2012) · Computers & Industrial Engineering · doi:10.1016/j.cie.2012.02.002 · Cited by 968
Zhang, Z., Si, X., Hu, C., & Lei, Y. (2018) · European Journal of Operational Research · doi:10.1016/j.ejor.2018.02.033 · Cited by 696
Si, X.-S., Wang, W., Hu, C.-H., Chen, M.-Y., & Zhou, D.-H. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2012.08.016 · Cited by 457
Wang, D., Miao, Q., & Pecht, M. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.03.129 · Cited by 351
Self-citation
Metadata
- Authors
- Pecht, M.
- Venue
- Encyclopedia of Structural Health Monitoring
- Publisher
- Wiley
- Published
- 2008-01-26
- OpenAlex
- W2914073730
- Cited by
- 287
- References
- 10
- Type
- reference entry
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Prognostics and Health Management of Electronics. https://app.cochat.ai/papers/10.1002/9780470061626.shm118
- The paper
- Pecht, M. (2008). Prognostics and Health Management of Electronics. Encyclopedia of Structural Health Monitoring. https://doi.org/10.1002/9780470061626.shm118
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.