The DOI matches its Crossref record.
Solution Processing of Inorganic Materials
Abstract
Preface. Contributors. 1. Introduction to Solution-Deposited Inorganic Electronics (Robert H. Reuss and Babu R. Chalamala). 1.1 Background and Motivation. 1.2 Importance of Solution Processing. 1.3 Application Challenges: TFT Devices and Circuits. 1.4 Application Challenges: Optoelectronics. 1.5 Application Challenges: Power Sources, Sensors, and Actuators. 1.6 Conclusions. References. 2. Chemical Solution Deposition-Basic Principles (Robert W. Schwartz and Manoj Narayanan). 2.1 Introduction. 2.2 Substrate Surface Preparation. 2.3 Starting Reagents and Solvents. 2.4 Precursor Solution Preparation and Characteristics. 2.5 Film Formation Behavior. 2.6 Structural Evolution: Film Formation, Densifi cation, and Crystallization. 2.7 Summary. References. 3. Solution Processing of Chalcogenide Semiconductors via Dimensional Reduction (David B. Mitzi). 3.1 Introduction. 3.2 Dimensional Reduction. 3.3 Hydrazine Precursor Route. 3.4 Similar Approaches without Hydrazine. 3.5 Future Prospects. References. 4. Oxide Dielectric Films for Active Electronics (Douglas A. Keszler, Jeremy T. Anderson, and Stephen T. Meyers). 4.1 Introduction. 4.2 Gate Dielectric Materials Selection. 4.3 Producing High-Quality Films from Solution. 4.4 HafSOx Thin-Film Dielectrics. 4.5 AlPO Thin-Film Dielectric. 4.6 Compositionally Graded and Laminated Structures. 4.7 Summary and Perspective. References. 5. Liquid Silicon Materials (Masahiro Furusawa and Hideki Tanaka). 5.1 Introduction. 5.2 Liquid Silicon Material. 5.3 Forming Silicon Films from the Liquid Silicon Materials. 5.4 Fabrication of a TFT Using a Solution-Processed Silicon Film. 5.5 Fabrication of TFT Using Inkjet-Printed Silicon Film. 5.6 Forming SiO2 Films from the Liquid Silicon Materials. 5.7 LTPS Fabrication Using Solution-Processed SiO2 Films. 5.8 Forming Doped Silicon Films. 5.9 Conclusions. Acknowledgments. References. 6. Spray CVD of Single-Source Precursors for Chalcopyrite I-III-VI2 Thin-Film Materials (Aloysius F. Hepp, Kulbinder K. Banger, Michael H.-C. Jin, Jerry D. Harris, Jeremiah S. McNatt, and John E. Dickman). 6.1 Introduction. 6.2 Single-Source Precursor Studies. 6.3 Spray or Atmosphere-Assisted CVD Processing. 6.4 Atmospheric Pressure Hot-Wall Reactor Parametric Study. 6.5 Fabrication and Testing of CIS Solar Cells. 6.6 Concluding Remarks. Acknowledgments. References. 7. Chemical Bath Deposition, Electrodeposition, and Electroless Deposition of Semiconductors, Superconductors, and Oxide Materials (Raghu Bhattacharya). 7.1 Introduction. 7.2 Chemical Bath Deposition. 7.3 Deposition of CIGS by Electrodeposition and Electroless Deposition. 7.4 Electrodeposition of Oxide Superconductors. 7.5 Electrodeposition of Cerium Oxide Films. 7.6 Electrodeposition of Gd 2 Zr 2 O 7 . References. 8. Successive Ionic Layer Adsorption and Reaction (SILAR) and Related Sequential Solution-Phase Deposition Techniques (Seppo Lindroos and Markku Leskela). 8.1 Introduction. 8.2 SILAR. 8.3 Materials Grown by SILAR. 8.4 ILGAR. 8.5 ECALE. 8.6 Other Sequential Solution-Phase Deposition Techniques. References. 9. Evaporation-Induced Self-Assembly for the Preparation of Porous Metal Oxide Films (Bernd Smarsly and Dina Fattakhova-Rohlfing). 9.1 Introduction. 9.2 The EISA Process. 9.3 Characterization of Self-Assembled Films. 9.4 Generation of Mesoporous Crystalline Metal Oxide Films Via Evaporation-Induced Self-Assembly. 9.5 Electronic Applications. 9.6 Mesoporous Films in Dye-Sensitized Solar Cells. 9.7 Conclusions. References. 10. Engineered Nanomaterials as Soluble Precursors for Inorganic Films (Dmitri V. Talapin). 10.1 Introduction. 10.2 Synthesis of Inorganic Nanomaterials. 10.3 Nanoparticles as Soluble Building Blocks for Inorganic Films. 10.4 Films and Arrays of Inorganic Nanowires. 10.5 Applications Using Networks and Arrays of Carbon Nanotubes. 10.6 Concluding Remarks. Acknowledgments. References. 11. Functional Structures Assembled from Nanoscale Building Blocks (Yu Huang). 11.1 Introduction. 11.2 Building Blocks: Synthesis and Properties. 11.3 Hierarchical Assembly of Nanowires. 11.4 Nanowire Electronics and Optoelectronics. 11.5 Nanowire Thin-Film Electronics-Concept and Performance. 11.6 Summary and Perspective. References. 12. Patterning Techniques for Solution Deposition (Paul Brazis, Daniel Gamota, Jie Zhang, and John Szczech). 12.1 Introduction. 12.2 Opportunities for Printable Inorganic verses Organic Materials Systems. 12.3 Printing and the Microelectronics Industry-Present and Future. 12.4 Printed Electronics Value Chain. 12.5 Electrically Functional Inks. 12.6 Printing Technologies. 12.7 Structure of a Printed Transistor. 12.8 Patterning Techniques for Solution Deposition: Technology Diffusion. 12.9 Conclusions. References. 13. Transfer Printing Techniques and Inorganic Single-Crystalline Materials for Flexible and Stretchable Electronics (Jong-Hyun Ahn, Matthew A. Meitl, Aflred J. Baca, Dahl-Young Khang, Hoon-Sik Kim, and John A. Rogers). 13.1 Introduction. 13.2 Inorganic S
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems
Ferrari, A. C., Bonaccorso, F., Fal'ko, V., Novoselov, K. S., Roche, S., Bøggild, P., Borini, S., Koppens, F. H. L., Palermo, V., Pugno, N., et al. (2015) · Nanoscale · doi:10.1039/c4nr01600a · Cited by 3,027
Kim, M.-G., Kanatzidis, M. G., Facchetti, A., & Marks, T. J. (2011) · Nature Materials · doi:10.1038/nmat3011 · Cited by 1,212
Production and processing of graphene and 2d crystals
Bonaccorso, F., Lombardo, A., Hasan, T., Sun, Z., Colombo, L., & Ferrari, A. C. (2012) · Materials Today · doi:10.1016/s1369-7021(13)70014-2 · Cited by 1,057
Banger, K. K., Yamashita, Y., Mori, K., Peterson, R. L., Leedham, T., Rickard, J., & Sirringhaus, H. (2011) · Nature Materials · doi:10.1038/nmat2914 · Cited by 1,054
Compound Copper Chalcogenide Nanocrystals
Coughlan, C., Ibáñez, M., Dobrozhan, O., Singh, A., Cabot, A., & Ryan, K. M. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00376 · Cited by 930
Lee, J.-S., Kovalenko, M. V., Huang, J., Chung, D. S., & Talapin, D. V. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.46 · Cited by 761
Measurement Techniques for the Study of Thin Film Heterogeneous Water Oxidation Electrocatalysts
Stevens, M. B., Enman, L. J., Batchellor, A. S., Cosby, M. R., Vise, A. E., Trang, C. D. M., & Boettcher, S. W. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b02796 · Cited by 586
Low-Cost Inorganic Solar Cells: From Ink To Printed Device
Habas, S. E., Platt, H. A. S., van Hest, M. F. A. M., & Ginley, D. S. (2010) · Chemical Reviews · doi:10.1021/cr100191d · Cited by 459
Colloidal Synthesis of Wurtzite Cu2ZnSnS4 Nanorods and Their Perpendicular Assembly
Singh, A., Geaney, H., Laffir, F., & Ryan, K. M. (2012) · Journal of the American Chemical Society · doi:10.1021/ja2112146 · Cited by 403
A review of TiO 2 nanostructured catalysts for sustainable H 2 generation
Ge, M., Cai, J., Iocozzia, J., Cao, C., Huang, J., Zhang, X., Shen, J., Wang, S., Zhang, S., Zhang, K.-Q., et al. (2017) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.12.052 · Cited by 400
Hybrid Organic–Inorganic Light‐Emitting Diodes
Sessolo, M., & Bolink, H. J. (2011) · Advanced Materials · doi:10.1002/adma.201004324 · Cited by 282
High-Performance Solution-Processed Amorphous Zinc−Indium−Tin Oxide Thin-Film Transistors
Kim, M.-G., Kim, H. S., Ha, Y.-G., He, J., Kanatzidis, M. G., Facchetti, A., & Marks, T. J. (2010) · Journal of the American Chemical Society · doi:10.1021/ja100615r · Cited by 252
Metadata
- Venue
- Wiley eBooks
- Publisher
- Wiley
- Published
- 2008-05-14
- OpenAlex
- W437369682
- Cited by
- 211
- References
- 0
- FWCI
- 3.51
- Type
- book
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.