The DOI matches its Crossref record; 123 of the 123 references it cites were found in a registry or an index.
High‐Entropy Alloys: Potential Candidates for High‐Temperature Applications – An Overview
Abstract
Multi‐principal elemental alloys, commonly referred to as high‐entropy alloys (HEAs), are a new class of emerging advanced materials with novel alloy design concept. Unlike the design of conventional alloys, which is based on one or at most two principal elements, the design of HEA is based on multi‐principal elements in equal or near‐equal atomic ratio. The advent of HEA has revived the alloy design perception and paved the way to produce an ample number of compositions with different combinations of promising properties for a variety of structural applications. Among the properties possessed by HEAs, sluggish diffusion and strength retention at elevated temperature have caught wide attention. The need to develop new materials for high‐temperature applications with superior high‐temperature properties over superalloys has been one of the prime concerns of the high‐temperature materials research community. The current article shows that HEAs have the potential to replace Ni‐base superalloys as the next generation high‐temperature materials. This review focuses on the phase stability, microstructural stability, and high‐temperature mechanical properties of HEAs. This article will be highly beneficial for materials engineering and science community whose interest is in the development and understanding of HEAs for high‐temperature applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
Microstructural development in equiatomic multicomponent alloys
Cantor, B., Chang, I. T. H., Knight, P., & Vincent, A. J. B. (2004) · Materials Science and Engineering: A · doi:10.1016/j.msea.2003.10.257 · Cited by 10,130
A critical review of high entropy alloys and related concepts
Miracle, D. B., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.08.081 · Cited by 8,973
A fracture-resistant high-entropy alloy for cryogenic applications
Gludovatz, B., Hohenwarter, A., Catoor, D., Chang, E. H., George, E. P., & Ritchie, R. O. (2014) · Science · doi:10.1126/science.1254581 · Cited by 5,714
Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
Li, Z., Pradeep, K. G., Deng, Y., Raabe, D., & Tasan, C. C. (2016) · Nature · doi:10.1038/nature17981 · Cited by 4,071
Gleiter, H. (1989) · Progress in Materials Science · doi:10.1016/0079-6425(89)90001-7 · Cited by 3,674
Otto, F., Dlouhý, A., Somsen, C., Bei, H., Eggeler, G., & George, E. P. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.06.018 · Cited by 3,352
Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys
Senkov, O. N., Wilks, G. B., Scott, J. M., & Miracle, D. B. (2011) · Intermetallics · doi:10.1016/j.intermet.2011.01.004 · Cited by 3,239
High-entropy alloy: challenges and prospects
Ye, Y. F., Wang, Q., Lu, J., Liu, C. T., & Yang, Y. (2016) · Materials Today · doi:10.1016/j.mattod.2015.11.026 · Cited by 3,016
Refractory high-entropy alloys
Senkov, O. N., Wilks, G. B., Miracle, D. B., Chuang, C. P., & Liaw, P. K. (2010) · Intermetallics · doi:10.1016/j.intermet.2010.05.014 · Cited by 2,950
High tensile ductility in a nanostructured metal
Wang, Y., Chen, M., Zhou, F., & Ma, E. (2002) · Nature · doi:10.1038/nature01133 · Cited by 2,945
Phase stability in high entropy alloys: Formation of solid-solution phase or amorphous phase
GUO, S., & LIU, C. T. (2011) · Progress in Natural Science: Materials International · doi:10.1016/s1002-0071(12)60080-x · Cited by 2,534
Sluggish diffusion in Co–Cr–Fe–Mn–Ni high-entropy alloys
Tsai, K.-Y., Tsai, M.-H., & Yeh, J.-W. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.04.058 · Cited by 2,366
Wu, Z., Bei, H., Pharr, G. M., & George, E. P. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.08.026 · Cited by 2,134
Recent progress in high-entropy alloys
Yeh, J.-W. (2006) · Annales de Chimie Science des Matériaux · doi:10.3166/acsm.31.633-648 · Cited by 2,117
Microstructure and room temperature properties of a high-entropy TaNbHfZrTi alloy
Senkov, O. N., Scott, J. M., Senkova, S. V., Miracle, D. B., & Woodward, C. F. (2011) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2011.02.171 · Cited by 1,856
Alloy Design Strategies and Future Trends in High-Entropy Alloys
Yeh, J.-W. (2013) · JOM · doi:10.1007/s11837-013-0761-6 · Cited by 1,786
A Promising New Class of High-Temperature Alloys: Eutectic High-Entropy Alloys
Lu, Y., Dong, Y., Guo, S., Jiang, L., Kang, H., Wang, T., Wen, B., Wang, Z., Jie, J., Cao, Z., et al. (2014) · Scientific Reports · doi:10.1038/srep06200 · Cited by 1,737
Wang, W.-R., Wang, W.-L., Wang, S.-C., Tsai, Y.-C., Lai, C.-H., & Yeh, J.-W. (2012) · Intermetallics · doi:10.1016/j.intermet.2012.03.005 · Cited by 1,517
Microstructure and wear behavior of AlxCo1.5CrFeNi1.5Tiy high-entropy alloys
Chuang, M.-H., Tsai, M.-H., Wang, W.-R., Lin, S.-J., & Yeh, J.-W. (2011) · Acta Materialia · doi:10.1016/j.actamat.2011.06.041 · Cited by 1,481
Relative effects of enthalpy and entropy on the phase stability of equiatomic high-entropy alloys
Otto, F., Yang, Y., Bei, H., & George, E. P. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.01.042 · Cited by 1,445
Schuh, B., Mendez-Martin, F., Völker, B., George, E. P., Clemens, H., Pippan, R., & Hohenwarter, A. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.06.025 · Cited by 1,323
Yeh, J.-W., Lin, S.-J., Chin, T.-S., Gan, J.-Y., Chen, S.-K., Shun, T.-T., Tsau, C.-H., & Chou, S.-Y. (2004) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-006-0234-4 · Cited by 1,252
Tong, C.-J., Chen, Y.-L., Yeh, J.-W., Lin, S.-J., Chen, S.-K., Shun, T.-T., Tsau, C.-H., & Chang, S.-Y. (2005) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-005-0283-0 · Cited by 1,239
Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy
Laplanche, G., Kostka, A., Horst, O. M., Eggeler, G., & George, E. P. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.038 · Cited by 1,198
Tensile properties of high- and medium-entropy alloys
Gali, A., & George, E. P. (2013) · Intermetallics · doi:10.1016/j.intermet.2013.03.018 · Cited by 1,194
Solid solution alloys of AlCoCrFeNiTix with excellent room-temperature mechanical properties
Zhou, Y. J., Zhang, Y., Wang, Y. L., & Chen, G. L. (2007) · Applied Physics Letters · doi:10.1063/1.2734517 · Cited by 1,079
High-entropy alloys: a critical assessment of their founding principles and future prospects
Pickering, E. J., & Jones, N. G. (2016) · International Materials Reviews · doi:10.1080/09506608.2016.1180020 · Cited by 1,062
Exploration and Development of High Entropy Alloys for Structural Applications
Miracle, D., Miller, J., Senkov, O., Woodward, C., Uchic, M., & Tiley, J. (2014) · Entropy · doi:10.3390/e16010494 · Cited by 1,012
Suryanarayana, C. (1995) · International Materials Reviews · doi:10.1179/095066095790151106 · Cited by 997
Otto, F., Dlouhý, A., Pradeep, K. G., Kuběnová, M., Raabe, D., Eggeler, G., & George, E. P. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.04.005 · Cited by 932
Grain growth and the Hall–Petch relationship in a high-entropy FeCrNiCoMn alloy
Liu, W. H., Wu, Y., He, J. Y., Nieh, T. G., & Lu, Z. P. (2013) · Scripta Materialia · doi:10.1016/j.scriptamat.2012.12.002 · Cited by 916
Microstructure and elevated temperature properties of a refractory TaNbHfZrTi alloy
Senkov, O. N., Scott, J. M., Senkova, S. V., Meisenkothen, F., Miracle, D. B., & Woodward, C. F. (2012) · Journal of Materials Science · doi:10.1007/s10853-012-6260-2 · Cited by 916
Decomposition in multi-component AlCoCrCuFeNi high-entropy alloy
Singh, S., Wanderka, N., Murty, B. S., Glatzel, U., & Banhart, J. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.09.023 · Cited by 872
Accelerated exploration of multi-principal element alloys with solid solution phases
Senkov, O. N., Miller, J. D., Miracle, D. B., & Woodward, C. (2015) · Nature Communications · doi:10.1038/ncomms7529 · Cited by 871
Effect of aluminum on the microstructure and properties of two refractory high-entropy alloys
Senkov, O. N., Senkova, S. V., & Woodward, C. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.01.029 · Cited by 857
Multi‐Principal‐Element Alloys with Improved Oxidation and Wear Resistance for Thermal Spray Coating
Huang, P. ‐., Yeh, J. ‐., Shun, T. ‐., & Chen, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300507 · Cited by 841
Greer, A. L. (1993) · Nature · doi:10.1038/366303a0 · Cited by 815
Fatigue behavior of Al0.5CoCrCuFeNi high entropy alloys
Hemphill, M. A., Yuan, T., Wang, G. Y., Yeh, J. W., Tsai, C. W., Chuang, A., & Liaw, P. K. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.06.046 · Cited by 811
Superplastic Extensibility of Nanocrystalline Copper at Room Temperature
Lu, L., Sui, M. L., & Lu, K. (2000) · Science · doi:10.1126/science.287.5457.1463 · Cited by 781
(2016) · Springer eBooks · doi:10.1007/978-3-319-27013-5 · Cited by 759
Li, Z., Tasan, C. C., Pradeep, K. G., & Raabe, D. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.03.069 · Cited by 757
Salishchev, G. A., Tikhonovsky, M. A., Shaysultanov, D. G., Stepanov, N. D., Kuznetsov, A. V., Kolodiy, I. V., Tortika, A. S., & Senkov, O. N. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.12.210 · Cited by 702
Yao, M. J., Pradeep, K. G., Tasan, C. C., & Raabe, D. (2014) · Scripta Materialia · doi:10.1016/j.scriptamat.2013.09.030 · Cited by 685
Zhang, Y., Stocks, G. M., Jin, K., Lu, C., Bei, H., Sales, B. C., Wang, L., Béland, L. K., Stoller, R. E., Samolyuk, G. D., et al. (2015) · Nature Communications · doi:10.1038/ncomms9736 · Cited by 672
Multicomponent and High Entropy Alloys
Cantor, B. (2014) · Entropy · doi:10.3390/e16094749 · Cited by 656
Enhanced mechanical properties of HfMoTaTiZr and HfMoNbTaTiZr refractory high-entropy alloys
Juan, C.-C., Tsai, M.-H., Tsai, C.-W., Lin, C.-M., Wang, W.-R., Yang, C.-C., Chen, S.-K., Lin, S.-J., & Yeh, J.-W. (2015) · Intermetallics · doi:10.1016/j.intermet.2015.03.013 · Cited by 633
On the elemental effect of AlCoCrCuFeNi high-entropy alloy system
Tung, C.-C., Yeh, J.-W., Shun, T.-T., Chen, S.-K., Huang, Y.-S., & Chen, H.-C. (2007) · Materials Letters · doi:10.1016/j.matlet.2006.03.140 · Cited by 629
Ma, D., Grabowski, B., Körmann, F., Neugebauer, J., & Raabe, D. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.08.050 · Cited by 556
Precipitation in the equiatomic high-entropy alloy CrMnFeCoNi
Pickering, E. J., Muñoz-Moreno, R., Stone, H. J., & Jones, N. G. (2016) · Scripta Materialia · doi:10.1016/j.scriptamat.2015.10.025 · Cited by 555
Li, D., Li, C., Feng, T., Zhang, Y., Sha, G., Lewandowski, J. J., Liaw, P. K., & Zhang, Y. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.10.038 · Cited by 532
Microstructure and texture evolution during annealing of equiatomic CoCrFeMnNi high-entropy alloy
Bhattacharjee, P. P., Sathiaraj, G. D., Zaid, M., Gatti, J. R., Lee, C., Tsai, C.-W., & Yeh, J.-W. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.10.237 · Cited by 530
Microstructure and compressive properties of AlCrFeCoNi high entropy alloy
Wang, Y. P., Li, B. S., Ren, M. X., Yang, C., & Fu, H. Z. (2008) · Materials Science and Engineering: A · doi:10.1016/j.msea.2008.01.064 · Cited by 528
Microstructure and properties of a refractory NbCrMo0.5Ta0.5TiZr alloy
Senkov, O. N., & Woodward, C. F. (2011) · Materials Science and Engineering: A · doi:10.1016/j.msea.2011.09.033 · Cited by 497
Stacking fault energies of face-centered cubic concentrated solid solution alloys
Zhao, S., Stocks, G. M., & Zhang, Y. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.05.001 · Cited by 495
Physical Metallurgy of High-Entropy Alloys
Yeh, J.-W. (2015) · JOM · doi:10.1007/s11837-015-1583-5 · Cited by 488
Jo, Y. H., Jung, S., Choi, W. M., Sohn, S. S., Kim, H. S., Lee, B. J., Kim, N. J., & Lee, S. (2017) · Nature Communications · doi:10.1038/ncomms15719 · Cited by 470
Self-citationLaplanche, G., Gadaud, P., Horst, O., Otto, F., Eggeler, G., & George, E. P. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2014.11.061 · Cited by 467
Rao, J. C., Diao, H. Y., Ocelík, V., Vainchtein, D., Zhang, C., Kuo, C., Tang, Z., Guo, W., Poplawsky, J. D., Zhou, Y., et al. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.03.066 · Cited by 439
Microstructure and mechanical properties of refractory MoNbHfZrTi high-entropy alloy
Guo, N. N., Wang, L., Luo, L. S., Li, X. Z., Su, Y. Q., Guo, J. J., & Fu, H. Z. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.05.019 · Cited by 426
Predicting the formation and stability of single phase high-entropy alloys
King, D. J. M., Middleburgh, S. C., McGregor, A. G., & Cortie, M. B. (2016) · Acta Materialia · doi:10.1016/j.actamat.2015.11.040 · Cited by 417
Alloying behavior in multi-component AlCoCrCuFe and NiCoCrCuFe high entropy alloys
Sathiyamoorthi, P., Murty, B. S., & Kottada, R. S. (2011) · Materials Science and Engineering A · doi:10.1016/j.msea.2011.11.044 · Cited by 411
Microstructure and oxidation behavior of new refractory high entropy alloys
Liu, C. M., Wang, H. M., Zhang, S. Q., Tang, H. B., & Zhang, A. L. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.08.102 · Cited by 390
Gorr, B., Azim, M., Christ, H.-J., Mueller, T., Schliephake, D., & Heilmaier, M. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2014.11.012 · Cited by 386
Phase selection rules for cast high entropy alloys: An overview
Guo, S. (2015) · Materials Science and Technology · doi:10.1179/1743284715y.0000000018 · Cited by 375
Microstructure and tensile behaviors of FCC Al0.3CoCrFeNi high entropy alloy
Shun, T.-T., & Du, Y.-C. (2008) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2008.12.088 · Cited by 374
Physical Properties of High Entropy Alloys
Tsai, M.-H. (2013) · Entropy · doi:10.3390/e15125338 · Cited by 373
Insights into the phase diagram of the CrMnFeCoNi high entropy alloy
Laurent-Brocq, M., Akhatova, A., Perrière, L., Chebini, S., Sauvage, X., Leroy, E., & Champion, Y. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.01.068 · Cited by 361
Steady state flow of the FeCoNiCrMn high entropy alloy at elevated temperatures
He, J. Y., Zhu, C., Zhou, D. Q., Liu, W. H., Nieh, T. G., & Lu, Z. P. (2014) · Intermetallics · doi:10.1016/j.intermet.2014.06.015 · Cited by 358
On the superior hot hardness and softening resistance of AlCoCrxFeMo0.5Ni high-entropy alloys
Hsu, C.-Y., Juan, C.-C., Wang, W.-R., Sheu, T.-S., Yeh, J.-W., & Chen, S.-K. (2011) · Materials Science and Engineering: A · doi:10.1016/j.msea.2011.01.072 · Cited by 356
High pressure synthesis of a hexagonal close-packed phase of the high-entropy alloy CrMnFeCoNi
Tracy, C. L., Park, S., Rittman, D. R., Zinkle, S. J., Bei, H., Lang, M., Ewing, R. C., & Mao, W. L. (2017) · Nature Communications · doi:10.1038/ncomms15634 · Cited by 329
Polymorphism in a high-entropy alloy
Zhang, F., Wu, Y., Lou, H., Zeng, Z., Prakapenka, V. B., Greenberg, E., Ren, Y., Yan, J., Okasinski, J. S., Liu, X., et al. (2017) · Nature Communications · doi:10.1038/ncomms15687 · Cited by 329
Otto, F., Hanold, N. L., & George, E. P. (2014) · Intermetallics · doi:10.1016/j.intermet.2014.05.014 · Cited by 322
Oxidation behavior of a refractory NbCrMo0.5Ta0.5TiZr alloy
Senkov, O. N., Senkova, S. V., Dimiduk, D. M., Woodward, C., & Miracle, D. B. (2012) · Journal of Materials Science · doi:10.1007/s10853-012-6582-0 · Cited by 299
Understanding phase stability of Al-Co-Cr-Fe-Ni high entropy alloys
Zhang, C., Zhang, F., Diao, H., Gao, M. C., Tang, Z., Poplawsky, J. D., & Liaw, P. K. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.07.073 · Cited by 285
Tensile properties of low-stacking fault energy high-entropy alloys
Zaddach, A. J., Scattergood, R. O., & Koch, C. C. (2015) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.03.109 · Cited by 278
Juan, C.-C., Tsai, M., Tsai, C., Hsu, W., Lin, C.-M., Chen, S.-K., Lin, S.-J., & Yeh, J. (2016) · Materials Letters · doi:10.1016/j.matlet.2016.08.060 · Cited by 275
High temperature deformation behavior and dynamic recrystallization in CoCrFeNiMn high entropy alloy
Stepanov, N. D., Shaysultanov, D. G., Yurchenko, N. Y., Zherebtsov, S. V., Ladygin, A. N., Salishchev, G. A., & Tikhonovsky, M. A. (2015) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.03.097 · Cited by 262
Yusenko, K. V., Riva, S., Carvalho, P. A., Yusenko, M. V., Arnaboldi, S., Sukhikh, A. S., Hanfland, M., & Gromilov, S. A. (2017) · Scripta Materialia · doi:10.1016/j.scriptamat.2017.05.022 · Cited by 256
High-Temperature Oxidation Behavior of Al-Co-Cr-Ni-(Fe or Si) Multicomponent High-Entropy Alloys
Butler, T. M., Alfano, J. P., Martens, R. L., & Weaver, M. L. (2015) · JOM · doi:10.1007/s11837-014-1185-7 · Cited by 237
Oxidation of CoCrFeMnNi High Entropy Alloys
Holcomb, G. R., Tylczak, J. H., & Carney, C. (2015) · JOM · doi:10.1007/s11837-015-1517-2 · Cited by 236
Gorr, B., Mueller, F., Christ, H., Mueller, T., Chen, H., Kauffmann, A., & Heilmaier, M. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.07.219 · Cited by 236
The fcc solid solution stability in the Co-Cr-Fe-Mn-Ni multi-component system
Bracq, G., Laurent-Brocq, M., Perrière, L., Pirès, R., Joubert, J.-M., & Guillot, I. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.02.017 · Cited by 236
Dąbrowa, J., Cieślak, G., Stygar, M., Mroczka, K., Berent, K., Kulik, T., & Danielewski, M. (2017) · Intermetallics · doi:10.1016/j.intermet.2016.12.015 · Cited by 229
Joo, S.-H., Kato, H., Jang, M. J., Moon, J., Kim, E. B., Hong, S.-J., & Kim, H. S. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.12.010 · Cited by 227
Self-citationA lightweight single-phase AlTiVCr compositionally complex alloy
Qiu, Y., Hu, Y. J., Taylor, A., Styles, M. J., Marceau, R. K. W., Ceguerra, A. V., Gibson, M. A., Liu, Z. K., Fraser, H. L., & Birbilis, N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.10.037 · Cited by 226
Formation of ordered/disordered nanoparticles in FCC high entropy alloys
Shun, T.-T., Hung, C.-H., & Lee, C.-F. (2010) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2009.12.071 · Cited by 219
Nanocrystalline High-Entropy Alloys: A New Paradigm in High-Temperature Strength and Stability
Zou, Y., Wheeler, J. M., Ma, H., Okle, P., & Spolenak, R. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04716 · Cited by 215
Effect of temperature on the fatigue-crack growth behavior of the high-entropy alloy CrMnFeCoNi
Thurston, K. V. S., Gludovatz, B., Hohenwarter, A., Laplanche, G., George, E. P., & Ritchie, R. O. (2017) · Intermetallics · doi:10.1016/j.intermet.2017.05.009 · Cited by 215
Dąbrowa, J., Kucza, W., Cieślak, G., Kulik, T., Danielewski, M., & Yeh, J.-W. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.03.046 · Cited by 208
Effect of coherent L12 nanoprecipitates on the tensile behavior of a fcc-based high-entropy alloy
Wang, Z. G., Zhou, W., Fu, L. M., Wang, J. F., Luo, R. C., Han, X. C., Chen, B., & Wang, X. D. (2017) · Materials Science and Engineering: A · doi:10.1016/j.msea.2017.04.111 · Cited by 208
Gwalani, B., Choudhuri, D., Soni, V., Ren, Y., Styles, M., Hwang, J. Y., Nam, S. J., Ryu, H., Hong, S. H., & Banerjee, R. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.02.053 · Cited by 206
Air-oxidation of FeCoNiCr-based quinary high-entropy alloys at 700–900 °C
Kai, W., Li, C. C., Cheng, F. P., Chu, K. P., Huang, R. T., Tsay, L. W., & Kai, J. J. (2017) · Corrosion Science · doi:10.1016/j.corsci.2017.02.008 · Cited by 187
Tasan, C. C., Deng, Y., Pradeep, K. G., Yao, M. J., Springer, H., & Raabe, D. (2014) · JOM · doi:10.1007/s11837-014-1133-6 · Cited by 185
Recent Progress in High Entropy Alloy Research
MacDonald, B. E., Fu, Z., Zheng, B., Chen, W., Lin, Y., Chen, F., Zhang, L., Ivanisenko, J., Zhou, Y., Hahn, H., et al. (2017) · JOM · doi:10.1007/s11837-017-2484-6 · Cited by 183
Novel Fe36Mn21Cr18Ni15Al10 high entropy alloy with bcc/B2 dual-phase structure
Shaysultanov, D. G., Salishchev, G. A., Ivanisenko, Y. V., Zherebtsov, S. V., Tikhonovsky, M. A., & Stepanov, N. D. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.02.211 · Cited by 177
Kai, W., Li, C. C., Cheng, F. P., Chu, K. P., Huang, R. T., Tsay, L. W., & Kai, J. J. (2016) · Corrosion Science · doi:10.1016/j.corsci.2016.03.020 · Cited by 171
Second phase formation in the CoCrFeNiMn high entropy alloy after recrystallization annealing
Stepanov, N., Shaysultanov, D. G., Ozerov, M. S., Zherebtsov, S. V., & Salishchev, G. A. (2016) · Materials Letters · doi:10.1016/j.matlet.2016.08.088 · Cited by 171
Inhibition of grain coarsening up to 1000°C in (AlCrNbSiTiV)N superhard coatings
Huang, P.-K., & Yeh, J. (2010) · Scripta Materialia · doi:10.1016/j.scriptamat.2009.09.015 · Cited by 169
Structure of the high-entropy alloy Al CrFeCoNi: fcc versus bcc
Ogura, M., Fukushima, T., Zeller, R., & Dederichs, P. H. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.04.318 · Cited by 139
Wang, F. J., & Zhang, Y. (2008) · Materials Science and Engineering A · doi:10.1016/j.msea.2008.05.020 · Cited by 134
High Temperature Oxidation and Corrosion Properties of High Entropy Superalloys
Tsao, T., Yeh, A., Kuo, C., & Murakami, H. (2016) · Entropy · doi:10.3390/e18020062 · Cited by 129
Design of High-Entropy Alloy: A Perspective from Nonideal Mixing
He, Q., Ding, Z., Ye, Y. F., & Yang, Y. G. (2017) · JOM · doi:10.1007/s11837-017-2452-1 · Cited by 127
Bae, J. W., Moon, J., Jang, M. J., Yim, D., Kim, D., Lee, S., & Kim, H. S. (2017) · Materials Science and Engineering A · doi:10.1016/j.msea.2017.07.079 · Cited by 117
Self-citationPark, N., Lee, B., & Tsuji, N. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.05.175 · Cited by 112
Deformation stimulated precipitation of a single-phase CoCrFeMnNi high entropy alloy
Zhou, W., Fu, L., Liu, P., Xu, X., Chen, B., Zhu, G., Wang, X., Shan, A. D., & Chen, M. W. (2017) · Intermetallics · doi:10.1016/j.intermet.2017.02.010 · Cited by 106
A high-entropy V 35 Ti 35 Fe 15 Cr 10 Zr 5 alloy with excellent high-temperature strength
Xian, X., Zhong, Z., Zhang, B., Song, K., Chen, C., Wang, S., Cheng, J., & Wu, Y. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.02.029 · Cited by 101
Nanocrystalline high-entropy alloys
Koch, C. C. (2017) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2017.341 · Cited by 101
Industrial development of high-entropy alloys
Wu, W.-H., Yang, C.-C., & Yeh, J. (2006) · European Journal of Control · doi:10.3166/acsm.31.737-747 · Cited by 100
Hot deformation behaviour and microstructure control in AlCrCuNiFeCo high entropy alloy
Nayan, N., Singh, G., Murty, S. V. S. N., Jha, A. K., Pant, B., George, K. M., & Ramamurty, U. (2014) · Intermetallics · doi:10.1016/j.intermet.2014.07.019 · Cited by 100
Li, Z., & Raabe, D. (2017) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2017.04.050 · Cited by 95
Daoud, H., Manzoni, A. M., Völkl, R., Wanderka, N., & Glatzel, U. (2015) · Advanced Engineering Materials · doi:10.1002/adem.201500179 · Cited by 93
Zhu, Z., Ma, K., Yang, X. M., & Shek, C. H. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.11.376 · Cited by 91
The Phase Competition and Stability of High-Entropy Alloys
Liu, W. H., Wu, Y., He, J., Zhang, Y., Liu, C. T., & Lü, Z. (2014) · JOM · doi:10.1007/s11837-014-1119-4 · Cited by 89
Understanding of the Elemental Diffusion Behavior in Concentrated Solid Solution Alloys
Zhang, C., Zhang, F., Jin, K., et al. (2017) · Journal of Phase Equilibria and Diffusion · doi:10.1007/s11669-017-0580-5 · Cited by 86
Liu, T., Wu, Z., Stoica, A. D., Xie, Q., Wu, W., Gao, Y., Bei, H., & An, K. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.06.039 · Cited by 72
Chang, S.-Y., Chen, M.-K., & Chen, D.-S. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3097186 · Cited by 70
Rao, Z., Wang, X., Wang, Q., Liu, T., Chen, X., Wang, L., & Hui, X. (2017) · Advanced Engineering Materials · doi:10.1002/adem.201600726 · Cited by 66
On the entropic stabilisation of an Al0.5CrFeCoNiCu high entropy alloy
Jones, N. G., Aveson, J. W., Bhowmik, A., Conduit, B. D., & Stone, H. J. (2014) · Intermetallics · doi:10.1016/j.intermet.2014.06.004 · Cited by 55
Structure and properties of reactively-sputtered AlxCoCrCuFeNi oxide films
Chen, T.-K., & Wong, M. (2007) · Thin Solid Films · doi:10.1016/j.tsf.2007.06.142 · Cited by 43
Predicting the Crystal Structure and Phase Transitions in High-Entropy Alloys
King, D. M., Middleburgh, S. C., Edwards, L., Lumpkin, G. R., & Cortie, M. B. (2015) · JOM · doi:10.1007/s11837-015-1495-4 · Cited by 41
High thermal stability of the amorphous structure of GexNbTaTiZr (x=0.5, 1) high-entropy alloys
Cheng, C.-Y., & Yeh, J. (2016) · Materials Letters · doi:10.1016/j.matlet.2016.06.040 · Cited by 38
Thermally Stable TiVCrZrHf Nitride Films as Diffusion Barriers in Copper Metallization
Liang, S.-C., Tsai, D., Chang, Z., Lin, T., Shiao, M., & Shieu, F. (2011) · Electrochemical and Solid-State Letters · doi:10.1149/2.012201esl · Cited by 33
Cited by
Clarifying the four core effects of high-entropy materials
Hsu, W.-L., Tsai, C.-W., Yeh, A.-C., & Yeh, J.-W. (2024) · Nature Reviews Chemistry · doi:10.1038/s41570-024-00602-5 · Cited by 928
High-entropy alloys with heterogeneous microstructure: Processing and mechanical properties
Sathiyamoorthi, P., & Kim, H. S. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100709 · Cited by 766
Self-citationRecent Advances on High‐Entropy Alloys for 3D Printing
Han, C., Fang, Q., Shi, Y., Tor, S. B., Chua, C. K., & Zhou, K. (2020) · Advanced Materials · doi:10.1002/adma.201903855 · Cited by 486
Ikeda, Y., Grabowski, B., & Körmann, F. (2019) · Materials Characterization · doi:10.1016/j.matchar.2018.06.019 · Cited by 337
Recent advances in tribology of high entropy alloys: A critical review
Kumar, D. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101106 · Cited by 310
Metadata
- Authors
- Praveen, S., & Kim, H. S.
- Venue
- Advanced Engineering Materials
- Publisher
- Wiley
- Published
- 2017-10-18
- Volume
- 20
- Issue
- 1
- ISSN
- 1438-1656 (ISSN-L)
- 1527-2648
- OpenAlex
- W2766023603
- Cited by
- 526
- References
- 123
- FWCI
- 19.83
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.