The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Properties of Carbon Nanotube Fibers Spun from DNA‐Stabilized Dispersions
Abstract
The fabrication of single‐walled carbon nanotube (CNT) fibers containing (salmon) DNA has been demonstrated. The DNA material has been found to be adequate for dispersing relatively large concentrations (up to 1 % by weight) of carbon nanotubes. These dispersions are better suited for fiber spinning than previously studied dispersions based on conventional surfactants, such as sodium dodecyl sulfate (SDS). The DNA‐containing fibers were less conductive than the fibers based on SDS, but they were significantly stronger. Considerably increased conductivity was obtained by thermally annealing the CNT/DNA fibers, a process accompanied by a loss in mechanical strength. Smaller improvements in conductivity could be introduced by annealing the carbon nanotubes before fiber production, with no alteration of the fiber mechanical properties. Those CNT/DNA fibers that were mechanically strong and conductive also exhibited good electrochemical behavior and useful capacitance values (up to 7.2 F g–1).
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Noncovalent sidewall functionalization of single-walled carbon nanotubes for protein immobilization
Chen, R. J., Zhang, Y., Wang, D., & Dai, H. (2001) · Journal of the American Chemical Society · doi:10.1021/ja010172b · Cited by 2,534
Cited by
Tasis, D., Tagmatarchis, N., Bianco, A., & Prato, M. (2006) · Chemical Reviews · doi:10.1021/cr050569o · Cited by 4,273
Carbon nanotube–polymer composites: Chemistry, processing, mechanical and electrical properties
Spitalsky, Z., Tasis, D., Papagelis, K., & Galiotis, C. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.09.003 · Cited by 3,125
Mechanical Reinforcement of Polymers Using Carbon Nanotubes
Coleman, J. N., Khan, U., & Gun'ko, Y. K. (2006) · Advanced Materials · doi:10.1002/adma.200501851 · Cited by 1,621
The biocompatibility of carbon nanotubes
Smart, S. K., Cassady, A. I., Lu, G. Q., & Martin, D. J. (2006) · Carbon · doi:10.1016/j.carbon.2005.10.011 · Cited by 1,011
Surface modifications for the effective dispersion of carbon nanotubes in solvents and polymers
Kim, S. W., Kim, T., Kim, Y. S., Choi, H. S., Lim, H. J., Yang, S. J., & Park, C. R. (2012) · Carbon · doi:10.1016/j.carbon.2011.08.011 · Cited by 695
Metadata
- Authors
- Barisci, J. N., Tahhan, M., Wallace, G. G., Badaire, S., Vaugien, T., Maugey, M., & Poulin, P.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2004-02
- Volume
- 14
- Issue
- 2
- Pages
- 133-138
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2034037531
- Cited by
- 159
- References
- 1
- FWCI
- 8.33
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Properties of Carbon Nanotube Fibers Spun from DNA‐Stabilized Dispersions. https://app.cochat.ai/papers/10.1002/adfm.200304500
- The paper
- Barisci, J. N., Tahhan, M., Wallace, G. G., Badaire, S., Vaugien, T., Maugey, M., & Poulin, P. (2004). Properties of Carbon Nanotube Fibers Spun from DNA‐Stabilized Dispersions. Advanced Functional Materials. https://doi.org/10.1002/adfm.200304500
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.