The DOI matches its Crossref record.
Enhancement of Modulus, Strength, and Toughness in Poly(methyl methacrylate)‐Based Composites by the Incorporation of Poly(methyl methacrylate)‐Functionalized Nanotubes
Abstract
Poly(methyl methacrylate) (PMMA)‐functionalized multiwalled carbon nanotubes are prepared by in situ polymerization. Infrared absorbance studies reveal covalent bonding between polymer strands and the nanotubes. These treated nanotubes are blended with pure PMMA in solution before drop‐casting to form composite films. Increases in Young's modulus, breaking strength, ultimate tensile strength, and toughness of ×1.9, ×4.7, ×4.6, and ×13.7, respectively, are observed on the addition of less than 0.5 wt % of nanotubes. Effective reinforcement is only observed up to a nanotube content of approximately 0.1 vol %. Above this volume fraction, all mechanical parameters tend to fall off, probably due to nanotube aggregation. In addition, scanning electron microscopy (SEM) studies of composite fracture surfaces show a polymer layer coating the nanotubes after film breakage. The fact that the polymer and not the interface fails suggests that functionalization results in an extremely high polymer/nanotube interfacial shear strength.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Carbon nanotube–polymer composites: Chemistry, processing, mechanical and electrical properties
Spitalsky, Z., Tasis, D., Papagelis, K., & Galiotis, C. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.09.003 · Cited by 3,125
Recent Advances in Research on Carbon Nanotube–Polymer Composites
Byrne, M. T., & Gun'ko, Y. K. (2010) · Advanced Materials · doi:10.1002/adma.200901545 · Cited by 873
Well-Dispersed Chitosan/Graphene Oxide Nanocomposites
Yang, X., Tu, Y., Li, L., Shang, S., & Tao, X.-M. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am100222m · Cited by 755
Polymer Nanocomposites—A Comparison between Carbon Nanotubes, Graphene, and Clay as Nanofillers
Bhattacharya, M. (2016) · Materials · doi:10.3390/ma9040262 · Cited by 747
Lee, W. J., Maiti, U. N., Lee, J. M., Lim, J., Han, T. H., & Kim, S. O. (2014) · Chemical Communications · doi:10.1039/c4cc00146j · Cited by 484
Metadata
- Authors
- Blond, D., Barron, V., Ruether, M., Ryan, K. P., Nicolosi, V., Blau, W. J., & Coleman, J. N.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2006-07-03
- Volume
- 16
- Issue
- 12
- Pages
- 1608-1614
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2159092742
- Cited by
- 231
- References
- 0
- FWCI
- 8.90
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Enhancement of Modulus, Strength, and Toughness in Poly(methyl methacrylate)‐Based Composites by the Incorporation of Poly(methyl methacrylate)‐Functionalized Nanotubes. https://app.cochat.ai/papers/10.1002/adfm.200500855
- The paper
- Blond, D., Barron, V., Ruether, M., Ryan, K. P., Nicolosi, V., Blau, W. J., & Coleman, J. N. (2006). Enhancement of Modulus, Strength, and Toughness in Poly(methyl methacrylate)‐Based Composites by the Incorporation of Poly(methyl methacrylate)‐Functionalized Nanotubes. Advanced Functional Materials. https://doi.org/10.1002/adfm.200500855
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.