The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Highly Organized Mesoporous TiO2 Films with Controlled Crystallinity: A Li‐Insertion Study
Abstract
A study of electrochemical Li insertion combined with structural and textural analysis enabled the identification and quantification of individual crystalline and amorphous phases in mesoporous TiO 2 films prepared by the evaporation‐induced self‐assembly procedure. It was found that the properties of the amphiphilic block copolymers used as templates, namely those of a novel poly(ethylene‐co‐butylene)‐b‐poly(ethylene oxide) polymer (KLE) and commercial Pluronic P123 (HO(CH 2 CH 2 O)20(CH 2 CH(CH 3)O)70(CH 2 CH 2 O)20 H), decisively influence the physicochemical properties of the resulting films. The KLE‐templated films possess a 3D cubic mesoporous structure and are practically amorphous when calcined at temperatures below 450 °C, but treatment at 550–700 °C provides a pure‐phase (anatase), fully crystalline material with intact mesoporous architecture. The electrochemically determined fraction of crystalline anatase increases from 85 to 100 % for films calcined at 550 and 700 °C, respectively. In contrast, the films prepared using Pluronic P123, which also show a 3D cubic pore arrangement, exhibit almost 50 % crystallinity even at a calcination temperature of 400 °C, and their transformation into a fully crystalline material is accompanied by collapse of the mesoporous texture. Therefore, our study revealed the significance of using suitable block‐copolymer templates for the generation of mesoporous metal oxide films. Coupling of both electrochemical and X‐ray diffraction methods has shown to be highly advisable for the correct interpretation of structure properties, in particular the crystallinity, of such sol–gel derived films.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generalized syntheses of large-pore mesoporous metal oxides with semicrystalline frameworks
Yang, P., Zhao, D., Margolese, D. I., Chmelka, B. F., & Stucky, G. D. (1998) · Nature · doi:10.1038/24132 · Cited by 2,493
Cited by
Templated Nanocrystal-Based Porous TiO2 Films for Next-Generation Electrochemical Capacitors
Brezesinski, T., Wang, J., Polleux, J., Dunn, B., & Tolbert, S. H. (2009) · Journal of the American Chemical Society · doi:10.1021/ja8057309 · Cited by 1,076
Self-citationPeripheral vision and pattern recognition: A review
Strasburger, H., Rentschler, I., & Jüttner, M. (2011) · Journal of Vision · doi:10.1167/11.5.13 · Cited by 943
Sanchez, C., Boissière, C., Grosso, D., Laberty, C., & Nicole, L. (2008) · Chemistry of Materials · doi:10.1021/cm702100t · Cited by 809
Mesoporous materials and electrochemistry
Walcarius, A. (2013) · Chemical Society Reviews · doi:10.1039/c2cs35322a · Cited by 623
Fröschl, T., Hörmann, U., Kubiak, P., Kučerová, G., Pfanzelt, M., Weiss, C. K., Behm, R. J., Hüsing, N., Kaiser, U., Landfester, K., et al. (2012) · Chemical Society Reviews · doi:10.1039/c2cs35013k · Cited by 449
Metadata
- Authors
- Fattakhova‐Rohlfing, D., Wark, M., Brezesinski, T., Smarsly, B. M., & Rathouský, J.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2006-12-12
- Volume
- 17
- Issue
- 1
- Pages
- 123-132
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2099114341
- Cited by
- 159
- References
- 1
- FWCI
- 7.38
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.