The DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.
Printable All‐Organic Electrochromic Active‐Matrix Displays
Abstract
All‐organic active matrix addressed displays based on electrochemical smart pixels made on flexible substrates are reported. Each individual smart pixel device combines an electrochemical transistor with an electrochromic display cell, thus resulting in a low‐voltage operating and robust display technology. Poly(3,4‐ethylenedioxythiophene) (PEDOT) doped with poly(styrenesulfonate) (PSS) served as the active material in the electrochemical smart pixels, as well as the conducting lines, of the monolithically integrated active‐matrix display. Different active‐matrix display addressing schemes have been investigated and a matrix display fill factor of 65 % was reached. This is achieved by combining a three‐terminal electrochemical transistor with an electrochromic display cell architecture, in which an additional layer of PEDOT:PSS was placed on top of the display cell counter electrode. In addition, we have evaluated different kinds of electrochromic polymer materials aiming at reaching a high color switch contrast. This work has been carried out in the light of achieving a robust display technology that is easily manufactured using a standard label printing press, which forced us to use the fewest different materials as well as avoiding exotic and complex device architectures. Together, this yields a manufacturing process of only five discrete patterning steps, which in turn promise for that the active matrix addressed displays can be manufactured on paper or plastic substrates in a roll‐to‐roll production procedure.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Poly(3,4-ethylenedioxythiophene) and Its Derivatives: Past, Present, and Future
Groenendaal, L., Jonas, F., Freitag, D., Pielartzik, H., & Reynolds, J. R. (2000) · Advanced Materials · doi:10.1002/(sici)1521-4095(200004)12:7<481::aid-adma481>3.0.co;2-c · Cited by 3,420
Inkjet Printing of Polymers: State of the Art and Future Developments
de Gans, B. ‐., Duineveld, P. C., & Schubert, U. S. (2004) · Advanced Materials · doi:10.1002/adma.200300385 · Cited by 1,906
An electrophoretic ink for all-printed reflective electronic displays
Comiskey, B., Albert, J. D., Yoshizawa, H., & Jacobson, J. (1998) · Nature · doi:10.1038/28349 · Cited by 1,123
Poly(alkylenedioxythiophene)s—new, very stable conducting polymers
Heywang, G., & Jonas, F. (1992) · Advanced Materials · doi:10.1002/adma.19920040213 · Cited by 1,027
Active Matrix Displays Based on All-Organic Electrochemical Smart Pixels Printed on Paper
Andersson, P., Nilsson, D., Svensson, P.-O., Chen, M., Malmström, A., Remonen, T., Kugler, T., & Berggren, M. (2002) · Advanced Materials · doi:10.1002/1521-4095(20021016)14:20<1460::aid-adma1460>3.0.co;2-s · Cited by 394
Self-citationApplication of Screen Printing in the Fabrication of Organic Light-Emitting Devices
Pardo, D. A., Jabbour, G. E., & Peyghambarian, N. (2000) · Advanced Materials · doi:10.1002/1521-4095(200009)12:17<1249::aid-adma1249>3.0.co;2-y · Cited by 372
Electrochemical bandgaps of substituted polythiophenes
Johansson, T., Mammo, W., Svensson, M., Andersson, M. R., & Inganäs, O. (2003) · J. Mater. Chem. · doi:10.1039/b301403g · Cited by 313
Inkjet printing of polymer thin film transistors
Kawase, T., Shimoda, T., Newsome, C., Sirringhaus, H., & Friend, R. H. (2003) · Thin Solid Films · doi:10.1016/s0040-6090(03)00801-0 · Cited by 282
Printable anodes for flexible organic solar cell modules
Aernouts, T., Vanlaeke, P., Geens, W., Poortmans, J., Heremans, P., Borghs, S., Mertens, R., Andriessen, R., & Leenders, L. (2004) · Thin Solid Films · doi:10.1016/j.tsf.2003.11.038 · Cited by 248
Bi‐stable and Dynamic Current Modulation in Electrochemical Organic Transistors
Nilsson, D., Chen, M., Kugler, T., Remonen, T., Armgarth, M., & Berggren, M. (2002) · Advanced Materials · doi:10.1002/1521-4095(20020104)14:1<51::aid-adma51>3.0.co;2-# · Cited by 248
Self-citation
Cited by
Organic electrochemical transistors
Rivnay, J., Inal, S., Salleo, A., Owens, R. M., Berggren, M., & Malliaras, G. G. (2018) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.86 · Cited by 2,065
Self-citationColor Control in π-Conjugated Organic Polymers for Use in Electrochromic Devices
Beaujuge, P. M., & Reynolds, J. R. (2010) · Chemical Reviews · doi:10.1021/cr900129a · Cited by 1,881
Tobjörk, D., & Österbacka, R. (2011) · Advanced Materials · doi:10.1002/adma.201004692 · Cited by 1,287
Printable ion-gel gate dielectrics for low-voltage polymer thin-film transistors on plastic
Cho, J. H., Lee, J., Xia, Y., Kim, B., He, Y., Renn, M. J., Lodge, T. P., & Daniel Frisbie, C. (2008) · Nature Materials · doi:10.1038/nmat2291 · Cited by 1,178
Roll‐to‐Roll fabrication of large area functional organic materials
Søndergaard, R. R., Hösel, M., & Krebs, F. C. (2013) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.23192 · Cited by 1,065
Emerging Electrochromic Materials and Devices for Future Displays
Gu, C., Jia, A.-B., Zhang, Y.-M., & Zhang, S. X.-A. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c01055 · Cited by 833
Controlling the mode of operation of organic transistors through side-chain engineering
Giovannitti, A., Sbircea, D.-T., Inal, S., Nielsen, C. B., Bandiello, E., Hanifi, D. A., Sessolo, M., Malliaras, G. G., McCulloch, I., & Rivnay, J. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1608780113 · Cited by 566
Liang, J., Tong, K., & Pei, Q. (2016) · Advanced Materials · doi:10.1002/adma.201600772 · Cited by 535
Oxide electrochromics: An introduction to devices and materials
Granqvist, C. G. (2012) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.08.021 · Cited by 440
Printed, Sub-3V Digital Circuits on Plastic from Aqueous Carbon Nanotube Inks
Ha, M., Xia, Y., Green, A. A., Zhang, W., Renn, M. J., Kim, C. H., Hersam, M. C., & Frisbie, C. D. (2010) · ACS Nano · doi:10.1021/nn100966s · Cited by 391
Complementary Logic Circuits Based on High‐Performance n‐Type Organic Electrochemical Transistors
Sun, H., Vagin, M., Wang, S., Crispin, X., Forchheimer, R., Berggren, M., & Fabiano, S. (2018) · Advanced Materials · doi:10.1002/adma.201704916 · Cited by 353
Self-citationQiao, Y., Guo, Y., Yu, C., Zhang, F., Xu, W., Liu, Y., & Zhu, D. (2012) · Journal of the American Chemical Society · doi:10.1021/ja3003183 · Cited by 303
All-printed large-scale integrated circuits based on organic electrochemical transistors
Andersson Ersman, P., Lassnig, R., Strandberg, J., Tu, D., Keshmiri, V., Forchheimer, R., Fabiano, S., Gustafsson, G., & Berggren, M. (2019) · Nature Communications · doi:10.1038/s41467-019-13079-4 · Cited by 263
Self-citationZirkl, M., Sawatdee, A., Helbig, U., Krause, M., Scheipl, G., Kraker, E., Ersman, P. A., Nilsson, D., Platt, D., Bodö, P., et al. (2011) · Advanced Materials · doi:10.1002/adma.201100054 · Cited by 255
Designing wearable microgrids: towards autonomous sustainable on-body energy management
Yin, L., Kim, K. N., Trifonov, A., Podhajny, T., & Wang, J. (2022) · Energy & Environmental Science · doi:10.1039/d1ee03113a · Cited by 111
Metadata
- Authors
- Andersson, P., Forchheimer, R., Tehrani, P., & Berggren, M.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2007-08-31
- Volume
- 17
- Issue
- 16
- Pages
- 3074-3082
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2134249793
- Cited by
- 382
- References
- 12
- FWCI
- 14.60
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.