The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Low‐Work‐Function Surface Formed by Solution‐Processed and Thermally Deposited Nanoscale Layers of Cesium Carbonate
Abstract
Nanostructured layers of Cs 2 CO 3 are shown to function very effectively as cathodes in organic electronic devices because of their good electron‐injection capabilities. Here, we report a comprehensive study of the origin of the low work function of nanostructured layers of Cs 2 CO 3 prepared by solution deposition and thermal evaporation. The nanoscale Cs 2 CO 3 layers are probed by various characterization methods including current–voltage (I–V) measurements, photovoltaic studies, X‐ray photoelectron spectroscopy (XPS), UV photoelectron spectroscopy (UPS), and impedance spectroscopy. It is found that thermally evaporated Cs 2 CO 3 decomposes into CsO 2 and cesium suboxides. The cesium suboxides dope CsO 2, yielding a heavily doped n‐type semiconductor with an intrinsically low work function. As a result, devices fabricated using thermally evaporated Cs 2 CO 3 are relatively insensitive to the choice of the cathode metal. The reaction of thermally evaporated Cs 2 CO 3 with Al can further reduce the work function to 2.1 eV by forming an Al–O–Cs complex. Solution‐processed Cs 2 CO 3 also reduces the work function of Au substrates from 5.1 to 3.5 eV. However, devices prepared using solution‐processed Cs 2 CO 3 exhibit high efficiency only if a reactive metal such as Al or Ca is used as the cathode metal. A strong chemical reaction occurs between spin‐coated Cs 2 CO 3 and thermally evaporated Al. An Al–O—Cs complex is formed as a result of this chemical reaction at the interface, and this layer significantly reduces the work function of the cathode. Finally, impedance spectroscopy results prove that this layer is highly conductive.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Enhanced electron injection in organic electroluminescence devices using an Al/LiF electrode
Hung, L. S., Tang, C. W., & Mason, M. G. (1997) · Applied Physics Letters · doi:10.1063/1.118344 · Cited by 1,483
Efficient inverted polymer solar cells
Li, G., Chu, C.-W., Shrotriya, V., Huang, J., & Yang, Y. (2006) · Applied Physics Letters · doi:10.1063/1.2212270 · Cited by 788
Self-citationPhotovoltaic measurement of the built-in potential in organic light emitting diodes and photodiodes
Malliaras, G. G., Salem, J. R., Brock, P. J., & Scott, J. C. (1998) · Journal of Applied Physics · doi:10.1063/1.368227 · Cited by 215
Chakrabarti, A., Hermann, K., Druzinic, R., Witko, M., Wagner, F., & Petersen, M. (1999) · Physical review. B, Condensed matter · doi:10.1103/physrevb.59.10583 · Cited by 213
Cited by
Recent Advances in Two-Dimensional Materials beyond Graphene
Bhimanapati, G. R., Lin, Z., Meunier, V., Jung, Y., Cha, J., Das, S., Xiao, D., Son, Y., Strano, M. S., Cooper, V. R., et al. (2015) · ACS Nano · doi:10.1021/acsnano.5b05556 · Cited by 2,659
A Universal Method to Produce Low–Work Function Electrodes for Organic Electronics
Zhou, Y., Fuentes-Hernandez, C., Shim, J., Meyer, J., Giordano, A. J., Li, H., Winget, P., Papadopoulos, T., Cheun, H., Kim, J., et al. (2012) · Science · doi:10.1126/science.1218829 · Cited by 2,140
Chen, L., Hong, Z., Li, G., & Yang, Y. (2009) · Advanced Materials · doi:10.1002/adma.200802854 · Cited by 1,267
Self-citationEmissive ZnO–graphene quantum dots for white-light-emitting diodes
Son, D. I., Kwon, B. W., Park, D. H., Seo, W.-S., Yi, Y., Angadi, B., Lee, C.-L., & Choi, W. K. (2012) · Nature Nanotechnology · doi:10.1038/nnano.2012.71 · Cited by 690
Interface investigation and engineering – achieving high performance polymer photovoltaic devices
Chen, L.-M., Xu, Z., Hong, Z., & Yang, Y. (2010) · Journal of Materials Chemistry · doi:10.1039/b925382c · Cited by 565
Self-citationKhazaei, M., Arai, M., Sasaki, T., Ranjbar, A., Liang, Y., & Yunoki, S. (2015) · Physical Review B · doi:10.1103/physrevb.92.075411 · Cited by 516
The role of buffer layers in polymer solar cells
Po, R., Carbonera, C., Bernardi, A., & Camaioni, N. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00273a · Cited by 480
Highly efficient inverted polymer solar cell by low temperature annealing of Cs2CO3 interlayer
Liao, H.-H., Chen, L.-M., Xu, Z., Li, G., & Yang, Y. (2008) · Applied Physics Letters · doi:10.1063/1.2918983 · Cited by 473
Self-citationGreiner, M. T., & Lu, Z.-H. (2013) · NPG Asia Materials · doi:10.1038/am.2013.29 · Cited by 444
Metal oxides for interface engineering in polymer solar cells
Chen, S., Manders, J. R., Tsang, S.-W., & So, F. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm33838f · Cited by 370
Liu, J., Xue, Y., Gao, Y., Yu, D., Durstock, M., & Dai, L. (2012) · Advanced Materials · doi:10.1002/adma.201104945 · Cited by 309
Hybrid Organic–Inorganic Light‐Emitting Diodes
Sessolo, M., & Bolink, H. J. (2011) · Advanced Materials · doi:10.1002/adma.201004324 · Cited by 282
Towards high-power-efficiency solution-processed OLEDs: Material and device perspectives
Wang, S., Zhang, H., Zhang, B., Xie, Z., & Wong, W.-Y. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100547 · Cited by 261
Vasilopoulou, M., Douvas, A. M., Georgiadou, D. G., Constantoudis, V., Davazoglou, D., Kennou, S., Palilis, L. C., Daphnomili, D., Coutsolelos, A. G., & Argitis, P. (2014) · Nano Research · doi:10.1007/s12274-014-0428-9 · Cited by 49
Metadata
- Authors
- Huang, J., Xu, Z., & Yang, Y.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2007-07-12
- Volume
- 17
- Issue
- 12
- Pages
- 1966-1973
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2093138560
- Cited by
- 352
- References
- 4
- FWCI
- 17.01
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.