The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
Elaboration of P3HT/CNT/PCBM Composites for Organic Photovoltaic Cells
Abstract
This Full Paper focuses on the preparation of single‐walled or multi‐walled carbon nanotube solutions with regioregular poly(3‐hexylthiophene) (P3HT) and a fullerene derivative 1‐(3‐methoxycarbonyl) propyl‐1‐phenyl[6,6]C 61 (PCBM) using a high dissolution and concentration method to exactly control the ratio of carbon nanotubes (CNTs) to the P3HT/PCBM mixture and disperse the CNTs homogeneously throughout the matrix. The CNT/P3HT/PCBM composites are deposed using a spin‐coating technique and characterized by absorption and fluorescence spectroscopy and by atomic force microscopy to underline the structure and the charge transfer between the CNTs and P3HT. The performance of photovoltaic devices obtained using these composites as a photoactive layer mainly show an increase of the short circuit current and a slight decrease of the open circuit voltage which generally leads to an improvement of the solar cell performances to an optimum CNT percentage. The best results are obtained with a P3HT/PCBM (1 : 1) mixture with 0.1 wt % multi‐walled carbon nanotubes with an open circuit voltage (Voc) of 0.57 V, a current density at the short‐circuit (Isc) of 9.3 mA cm–2 and a fill factor of 38.4 %, which leads to a power conversion efficiency of 2.0 % (irradiance of 100 mW cm–2 spectroscopically distributed following AM1.5).
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Li, G., Shrotriya, V., Huang, J., Yao, Y., Moriarty, T., Emery, K., & Yang, Y. (2005) · Nature Materials · doi:10.1038/nmat1500 · Cited by 5,535
Design Rules for Donors in Bulk‐Heterojunction Solar Cells—Towards 10 % Energy‐Conversion Efficiency
Scharber, M. C., Mühlbacher, D., Koppe, M., Denk, P., Waldauf, C., Heeger, A. J., & Brabec, C. J. (2006) · Advanced Materials · doi:10.1002/adma.200501717 · Cited by 5,205
Transparent, Conductive Carbon Nanotube Films
Wu, Z., Chen, Z., Du, X., Logan, J. M., Sippel, J., Nikolou, M., Kamaras, K., Reynolds, J. R., Tanner, D. B., Hebard, A. F., et al. (2004) · Science · doi:10.1126/science.1101243 · Cited by 2,959
Effects of Postproduction Treatment on Plastic Solar Cells
Padinger, F., Rittberger, R. S., & Sariciftci, N. S. (2003) · Advanced Functional Materials · doi:10.1002/adfm.200390011 · Cited by 2,018
Kim, J. Y., Kim, S. H., Lee, H. ‐., Lee, K., Ma, W., Gong, X., & Heeger, A. J. (2006) · Advanced Materials · doi:10.1002/adma.200501825 · Cited by 1,656
Nanoscale Morphology of High-Performance Polymer Solar Cells
Yang, X., Loos, J., Veenstra, S. C., Verhees, W. J. H., Wienk, M. M., Kroon, J. M., Michels, M. A. J., & Janssen, R. A. J. (2005) · Nano Letters · doi:10.1021/nl048120i · Cited by 1,543
Composites of Carbon Nanotubes and Conjugated Polymers for Photovoltaic Devices
Ago, H., Petritsch, K., Shaffer, M. S. P., Windle, A. H., & Friend, R. H. (1999) · Advanced Materials · Cited by 694
Carbon nanotube films for transparent and plastic electronics
Gruner, G. (2006) · Journal of Materials Chemistry · doi:10.1039/b603821m · Cited by 567
Conducting and transparent single-wall carbon nanotube electrodes for polymer-fullerene solar cells
Pasquier, A. D., Unalan, H. E., Kanwal, A., Miller, S., & Chhowalla, M. (2005) · Applied Physics Letters · doi:10.1063/1.2132065 · Cited by 516
Poly(3‐hexylthiophene) Fibers for Photovoltaic Applications
Berson, S., De Bettignies, R., Bailly, S., & Guillerez, S. (2007) · Advanced Functional Materials · doi:10.1002/adfm.200600922 · Cited by 504
Self-citationSingle‐wall carbon nanotube–polymer solar cells
Landi, B. J., Raffaelle, R. P., Castro, S. L., & Bailey, S. G. (2005) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.604 · Cited by 269
A fullerene–single wall carbon nanotube complex for polymer bulk heterojunction photovoltaic cells
Li, C., Chen, Y., Wang, Y., Iqbal, Z., Chhowalla, M., & Mitra, S. (2007) · J. Mater. Chem. · doi:10.1039/b618518e · Cited by 211
Photovoltaic Properties of Dye Functionalized Single-Wall Carbon Nanotube/Conjugated Polymer Devices
Bhattacharyya, S., Kymakis, E., & Amaratunga, G. A. J. (2004) · Chemistry of Materials · doi:10.1021/cm0496063 · Cited by 185
Post-fabrication annealing effects in polymer-nanotube photovoltaic cells
Kymakis, E., Koudoumas, E., Franghiadakis, I., & Amaratunga, G. A. J. (2006) · Journal of Physics D Applied Physics · doi:10.1088/0022-3727/39/6/010 · Cited by 111
Single-Walled Carbon Nanotubes Template the One-Dimensional Ordering of a Polythiophene Derivative
Ikeda, A., Nobusawa, K., Hamano, T., & Kikuchi, J. (2006) · Organic Letters · doi:10.1021/ol062187q · Cited by 88
Cited by
Carbon nanomaterials for electronics, optoelectronics, photovoltaics, and sensing
Jariwala, D., Sangwan, V. K., Lauhon, L. J., Marks, T. J., & Hersam, M. C. (2013) · Chem. Soc. Rev. · doi:10.1039/c2cs35335k · Cited by 1,284
Organic photoresponse materials and devices
Dong, H., Zhu, H., Meng, Q., Gong, X., & Hu, W. (2012) · Chem. Soc. Rev. · doi:10.1039/c1cs15205j · Cited by 635
Dang, M. T., Hirsch, L., Wantz, G., & Wuest, J. D. (2013) · Chemical Reviews · doi:10.1021/cr300005u · Cited by 587
Maiti, U. N., Lee, W. J., Lee, J. M., Oh, Y., Kim, J. Y., Kim, J. E., Shim, J., Han, T. H., & Kim, S. O. (2014) · Advanced Materials · doi:10.1002/adma.201303265 · Cited by 544
Polymer Photovoltaic Cells Based on Solution‐Processable Graphene and P3HT
Liu, Q., Liu, Z., Zhang, X., Yang, L., Zhang, N., Pan, G., Yin, S., Chen, Y., & Wei, J. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200800954 · Cited by 494
Metadata
- Authors
- Berson, S., de Bettignies, R., Bailly, S., Guillerez, S., & Jousselme, B.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2007-10-04
- Volume
- 17
- Issue
- 16
- Pages
- 3363-3370
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2043692696
- Cited by
- 253
- References
- 15
- FWCI
- 18.90
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.