The DOI matches its Crossref record; 17 of the 17 references it cites were found in a registry or an index.
Controlling the Thickness of the Surface Oxide Layer on Cu Nanoparticles for the Fabrication of Conductive Structures by Ink‐Jet Printing
Abstract
With the aim of preparing a high performance conductive ink, we sought to control the surface chemistry of Cu nanoparticles so as to minimize surface oxidation. Specifically, the surface oxide layer on Cu nanoparticles synthesized in ambient atmosphere was minimized by adjusting the molecular weight of poly(N‐vinylpyrrolidone) capping molecules, as confirmed by high resolution transmission electron microscopy and X‐ray photoelectron spectroscopy analyses. In addition, we demonstrate that by minimizing the thickness of the surface oxide layer, Cu granular films with good conductivity could be obtained by sintering nanoparticle assembles. Finally, we fabricated highly conductive Cu patterns on a plastic substrate by ink‐jet printing.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
High-Resolution Inkjet Printing of All-Polymer Transistor Circuits
Sirringhaus, H., Kawase, T., Friend, R. H., Shimoda, T., Inbasekaran, M., Wu, W., & Woo, E. P. (2000) · Science · doi:10.1126/science.290.5499.2123 · Cited by 3,311
Inkjet Printing of Polymers: State of the Art and Future Developments
de Gans, B. ‐., Duineveld, P. C., & Schubert, U. S. (2004) · Advanced Materials · doi:10.1002/adma.200300385 · Cited by 1,906
Synthesis, Characterization, and Properties of Metallic Copper Nanoparticles
Dhas, N. A., Raj, C. P., & Gedanken, A. (1998) · Chemistry of Materials · doi:10.1021/cm9708269 · Cited by 651
Photochemical Formation of Silver Nanoparticles in Poly(N-vinylpyrrolidone)
Huang, H. H., Ni, X. P., Loy, G. L., Chew, C. H., Tan, K. L., Loh, F. C., Deng, J. F., & Xu, G. Q. (1996) · Langmuir · doi:10.1021/la950435d · Cited by 578
Synthesis of copper metallic clusters using reverse micelles as microreactors
Lisiecki, I., & Pileni, M. P. (1993) · Journal of the American Chemical Society · doi:10.1021/ja00063a006 · Cited by 571
Direct writing of copper conductive patterns by ink-jet printing
Park, B. K., Kim, D., Jeong, S., Moon, J., & Kim, J. S. (2007) · Thin Solid Films · doi:10.1016/j.tsf.2006.11.142 · Cited by 555
Self-citationPlastic-Compatible Low Resistance Printable Gold Nanoparticle Conductors for Flexible Electronics
Huang, D., Liao, F., Molesa, S., Redinger, D., & Subramanian, V. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1582466 · Cited by 524
Washio, I., Xiong, Y., Yin, Y., & Xia, Y. (2006) · Advanced Materials · doi:10.1002/adma.200600675 · Cited by 520
Self-citationThermal behavior of silver nanoparticles for low-temperature interconnect applications
Moon, K.-S., Dong, H., Maric, R., Pothukuchi, S., Hunt, A., Li, Y., & Wong, C. P. (2005) · Journal of Electronic Materials · doi:10.1007/s11664-005-0229-8 · Cited by 385
Synthesis, Characterization, and Nonlinear Optical Properties of Copper Nanoparticles
Huang, H. H., Yan, F. Q., Kek, Y. M., Chew, C. H., Xu, G. Q., Ji, W., Oh, P. S., & Tang, S. H. (1997) · Langmuir · doi:10.1021/la9605495 · Cited by 336
Cited by
Shape‐Controlled Synthesis of Metal Nanocrystals: Simple Chemistry Meets Complex Physics?
Xia, Y., Xiong, Y., Lim, B., & Skrabalak, S. E. (2009) · Angewandte Chemie International Edition · doi:10.1002/anie.200802248 · Cited by 5,702
Shape-Controlled Synthesis of Colloidal Metal Nanocrystals: Thermodynamic versus Kinetic Products
Xia, Y., Xia, X., & Peng, H.-C. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b04641 · Cited by 969
Self-citationConductive Nanomaterials for Printed Electronics
Kamyshny, A., & Magdassi, S. (2014) · Small · doi:10.1002/smll.201303000 · Cited by 911
Seed‐Mediated Growth of Colloidal Metal Nanocrystals
Xia, Y., Gilroy, K. D., Peng, H., & Xia, X. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201604731 · Cited by 800
Self-citationInfluence of Fluid Physical Properties on Ink-Jet Printability
Jang, D., Kim, D., & Moon, J. (2009) · Langmuir · doi:10.1021/la900059m · Cited by 745
Self-citationNanomaterial‐Enabled Stretchable Conductors: Strategies, Materials and Devices
Yao, S., & Zhu, Y. (2015) · Advanced Materials · doi:10.1002/adma.201404446 · Cited by 695
Metal Nanocrystals with Highly Branched Morphologies
Lim, B., & Xia, Y. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201002024 · Cited by 570
Self-citationInkjet printing wearable electronic devices
Gao, M., Li, L., & Song, Y. (2017) · Journal of Materials Chemistry C · doi:10.1039/c7tc00038c · Cited by 535
Inorganic nanomaterials for printed electronics: a review
Wu, W. (2017) · Nanoscale · doi:10.1039/c7nr01604b · Cited by 522
Conductive nanomaterials for 2D and 3D printed flexible electronics
Kamyshny, A., & Magdassi, S. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00738a · Cited by 469
Low-Cost Inorganic Solar Cells: From Ink To Printed Device
Habas, S. E., Platt, H. A. S., van Hest, M. F. A. M., & Ginley, D. S. (2010) · Chemical Reviews · doi:10.1021/cr100191d · Cited by 459
A chemical reduction approach to the synthesis of copper nanoparticles
Khan, A., Rashid, A., Younas, R., & Chong, R. (2016) · International Nano Letters · doi:10.1007/s40089-015-0163-6 · Cited by 455
Yin, A.-X., Min, X.-Q., Zhang, Y.-W., & Yan, C.-H. (2011) · Journal of the American Chemical Society · doi:10.1021/ja200329p · Cited by 454
Copper Nanoparticles for Printed Electronics: Routes Towards Achieving Oxidation Stability
Magdassi, S., Grouchko, M., & Kamyshny, A. (2010) · Materials · doi:10.3390/ma3094626 · Cited by 429
Metal-based Inkjet Inks for Printed Electronics
Kamyshny, A. (2011) · The Open Applied Physics Journal · doi:10.2174/1874183501104010019 · Cited by 424
Formkontrolle bei der Synthese von Metallnanokristallen: einfache Chemie, komplexe Physik?
Xia, Y., Xiong, Y., Lim, B., & Skrabalak, S. E. (2009) · Angewandte Chemie · doi:10.1002/ange.200802248 · Cited by 418
Self-citationBen-Sasson, M., Zodrow, K. R., Genggeng, Q., Kang, Y., Giannelis, E. P., & Elimelech, M. (2014) · Environmental Science & Technology · doi:10.1021/es404232s · Cited by 367
Copper Nanowires as Fully Transparent Conductive Electrodes
Guo, H., Lin, N., Chen, Y., Wang, Z., Xie, Q., Zheng, T., Gao, N., Li, S., Kang, J., Cai, D., et al. (2013) · Scientific Reports · doi:10.1038/srep02323 · Cited by 360
Microfluidization of Graphite and Formulation of Graphene-Based Conductive Inks
Karagiannidis, P. G., Hodge, S. A., Lombardi, L., Tomarchio, F., Decorde, N., Milana, S., Goykhman, I., Su, Y., Mesite, S. V., Johnstone, D. N., et al. (2017) · ACS Nano · doi:10.1021/acsnano.6b07735 · Cited by 348
Surface coordination layer passivates oxidation of copper
Peng, J., Chen, B., Wang, Z., Guo, J., Wu, B., Hao, S., Zhang, Q., Gu, L., Zhou, Q., Liu, Z., et al. (2020) · Nature · doi:10.1038/s41586-020-2783-x · Cited by 323
Synthesis, Characterization, and Applications of Metal Nanoparticles
Shnoudeh, A. J., Hamad, I., Abdo, R. W., Qadumii, L., Jaber, A. Y., Surchi, H. S., & Alkelany, S. Z. (2019) · Biomaterials and Bionanotechnology · doi:10.1016/b978-0-12-814427-5.00015-9 · Cited by 309
Tran, T. S., Dutta, N. K., & Choudhury, N. R. (2018) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2018.09.003 · Cited by 298
All inkjet-printed graphene-based conductive patterns for wearable e-textile applications
Karim, N., Afroj, S., Malandraki, A., Butterworth, S., Beach, C., Rigout, M., Novoselov, K. S., Casson, A. J., & Yeates, S. G. (2017) · Journal of Materials Chemistry C · doi:10.1039/c7tc03669h · Cited by 282
Song, J., Li, J., Xu, J., & Zeng, H. (2014) · Nano Letters · doi:10.1021/nl502647k · Cited by 279
Synthesis and antimicrobial activity of monodisperse copper nanoparticles
Kruk, T., Szczepanowicz, K., Stefańska, J., Socha, R. P., & Warszyński, P. (2015) · Colloids and Surfaces B: Biointerfaces · doi:10.1016/j.colsurfb.2015.02.009 · Cited by 271
Oxidative etching for controlled synthesis of metal nanocrystals: atomic addition and subtraction
Long, R., Zhou, S., Wiley, B. J., & Xiong, Y. (2014) · Chemical Society Reviews · doi:10.1039/c4cs00136b · Cited by 270
Naghdi, S., Rhee, K. Y., Hui, D., & Park, S. J. (2018) · Coatings · doi:10.3390/coatings8080278 · Cited by 258
Cheng, R., Hu, T., Hu, M., Li, C., Liang, Y., Wang, Z., Zhang, H., Li, M., Wang, H., Lu, H., et al. (2020) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2019.09.013 · Cited by 105
Aslan, E., Eroğlu, Z., Yanalak, G., Metin, Ö., & Hatay Patir, I. (2022) · Applied Surface Science · doi:10.1016/j.apsusc.2022.154435 · Cited by 9
Metadata
- Authors
- Jeong, S., Woo, K., Kim, D., Lim, S., Kim, J. S., Shin, H., Xia, Y., & Moon, J.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2008-03-11
- Volume
- 18
- Issue
- 5
- Pages
- 679-686
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2070864860
- Cited by
- 529
- References
- 17
- FWCI
- 19.13
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.