The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
High‐Performance Carbon‐LiMnPO4 Nanocomposite Cathode for Lithium Batteries
Abstract
A cathode material of an electrically conducting carbon‐LiMnPO 4 nanocomposite is synthesized by ultrasonic spray pyrolysis followed by ball milling. The effect of the carbon content on the physicochemical and electrochemical properties of this material is extensively studied. A LiMnPO 4 electrode with 30 wt% acetylene black (AB) carbon exhibits an excellent rate capability and good cycle life in cell tests at 55 and 25 °C. This electrode delivers a discharge capacity of 158 mAh g−1 at 1/20 C, 126 mAh g−1 at 1 C, and 107 mAh g−1 at 2 C rate, which are the highest capacities reported so far for this type of electrode. Transmission electron microscopy and Mn dissolution results confirm that the carbon particles surrounding the LiMnPO 4 protect the electrode from HF attack, and thus lead to a reduction of the Mn dissolution that usually occurs with this electrode. The improved electrochemical properties of the C‐LiMnPO 4 electrode are also verified by electrochemical impedance spectroscopy.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries
Padhi, A. K., Nanjundaswamy, K. S., & Goodenough, J. B. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837571 · Cited by 7,933
Electronically conductive phospho-olivines as lithium storage electrodes
Chung, S.-Y., Bloking, J. T., & Chiang, Y.-M. (2002) · Nature Materials · doi:10.1038/nmat732 · Cited by 2,939
Optimized LiFePO[sub 4] for Lithium Battery Cathodes
Yamada, A., Chung, S. C., & Hinokuma, K. (2001) · Journal of The Electrochemical Society · doi:10.1149/1.1348257 · Cited by 1,867
Approaching Theoretical Capacity of LiFePO[sub 4] at Room Temperature at High Rates
Huang, H., Yin, S.-C., & Nazar, L. F. (2001) · Electrochemical and Solid-State Letters · doi:10.1149/1.1396695 · Cited by 1,407
Electroactivity of natural and synthetic triphylite
Ravet, N., Chouinard, Y., Magnan, J. F., Besner, S., Gauthier, M., & Armand, M. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00727-3 · Cited by 844
Discharge Model for the Lithium Iron-Phosphate Electrode
Srinivasan, V., & Newman, J. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1785012 · Cited by 730
Delacourt, C., Laffont, L., Bouchet, R., Wurm, C., Leriche, J.-B., Morcrette, M., Tarascon, J.-M., & Masquelier, C. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1884787 · Cited by 619
Blyr, A., Sigala, C., Amatucci, G., Guyomard, D., Chabre, Y., & Tarascon, J. ‐. (1998) · Journal of The Electrochemical Society · doi:10.1149/1.1838235 · Cited by 466
Reaction behavior of LiFePO4 as a cathode material for rechargeable lithium batteries
Takahashi, M. (2002) · Solid State Ionics · doi:10.1016/s0167-2738(02)00064-4 · Cited by 452
Meethong, N., Huang, H. S., Speakman, S. A., et al. (2007) · Advanced Functional Materials · doi:10.1002/adfm.200600938 · Cited by 440
One-Step Low-Temperature Route for the Preparation of Electrochemically Active LiMnPO4 Powders
Delacourt, C., Poizot, P., Morcrette, M., Tarascon, J.-M., & Masquelier, C. (2004) · Chemistry of Materials · doi:10.1021/cm030347b · Cited by 406
High-performance, nano-structured LiMnPO4 synthesized via a polyol method
Wang, D., Buqa, H., Crouzet, M., Deghenghi, G., Drézen, T., Exnar, I., Kwon, N.-H., Miners, J. H., Poletto, L., & Grätzel, M. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.09.077 · Cited by 303
Dual functioned BiOF-coated Li[Li0.1Al0.05Mn1.85]O4 for lithium batteries
Lee, K., Myung, S., Amine, K., Yashiro, H., & Sun, Y. (2009) · Journal of Materials Chemistry · doi:10.1039/b819224c · Cited by 73
Self-citation
Cited by
High-voltage liquid electrolytes for Li batteries: progress and perspectives
Fan, X., & Wang, C. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00450f · Cited by 980
Enhancing the performances of Li-ion batteries by carbon-coating: present and future
Li, H., & Zhou, H. (2012) · Chem. Commun. · doi:10.1039/c1cc14764a · Cited by 963
Nanostructured Mn-based oxides for electrochemical energy storage and conversion
Zhang, K., Han, X., Hu, Z., Zhang, X., Tao, Z., & Chen, J. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00218k · Cited by 859
Prospective materials and applications for Li secondary batteries
Jeong, G., Kim, Y.-U., Kim, H., Kim, Y.-J., & Sohn, H.-J. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00831a · Cited by 616
Recent advances in the research of polyanion-type cathode materials for Li-ion batteries
Gong, Z., & Yang, Y. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00713g · Cited by 549
Metadata
- Authors
- Oh, S., Oh, S., Yoon, C., Scrosati, B., Amine, K., & Sun, Y.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2010-08-04
- Volume
- 20
- Issue
- 19
- Pages
- 3260-3265
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2012995907
- Cited by
- 396
- References
- 13
- FWCI
- 28.16
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.