The DOI matches its Crossref record; 32 of the 32 references it cites were found in a registry or an index.
High‐Yield Synthesis and Electrochemical and Photovoltaic Properties of Indene‐C70 Bisadduct
Abstract
[6, 6]‐Phenyl‐C 61‐butyric acid methyl ester (PC 60 BM) is the widely used acceptor material in polymer solar cells (PSCs). Nevertheless, the low LUMO energy level and weak absorption in visible region are its two weak points. For enhancing the solar light harvest, the soluble C 70 derivative PC 70 BM has been used as acceptor instead of PC 60 BM in high efficiency PSCs in recent years. But, the LUMO level of PC 70 BM is the same as that of PC 60 BM, which is too low for the PSCs based on the polymer donors with higher HOMO level, such as poly (3‐hexylthiophene) (P3HT). Here, a new soluble C 70 derivative, indene‐C 70 bisadduct (IC 70 BA), is synthesized with high yield of 58% by a one‐pot reaction of indene and C 70 at 180 °C for 72 h. The electrochemical properties and electronic energy levels of the fullerene derivatives are measured by cyclic voltammetry. The LUMO energy level of IC 70 BA is 0.19 eV higher than that of PC 70 BM. The PSC based on P3HT with IC 70 BA as acceptor shows a higher Voc of 0.84 V and higher power conversion efficiency (PCE) of 5.64%, while the PSC based on P3HT/PC 60 BM and P3HT/PC 70 BM displays Voc of 0.59 V and 0.58 V, and PCE of 3.55% and 3.96%, respectively, under the illumination of AM1.5G, 100 mW cm−2. The results indicate that IC 70 BA is an excellent acceptor for the P3HT‐based PSCs and could be a promising new acceptor instead of PC 70 BM for the high performance PSCs based on narrow bandgap conjugated polymer donor.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yu, G., Gao, J., Hummelen, J. C., Wudl, F., & Heeger, A. J. (1995) · Science · doi:10.1126/science.270.5243.1789 · Cited by 10,348
Li, G., Shrotriya, V., Huang, J., Yao, Y., Moriarty, T., Emery, K., & Yang, Y. (2005) · Nature Materials · doi:10.1038/nmat1500 · Cited by 5,535
Design Rules for Donors in Bulk‐Heterojunction Solar Cells—Towards 10 % Energy‐Conversion Efficiency
Scharber, M. C., Mühlbacher, D., Koppe, M., Denk, P., Waldauf, C., Heeger, A. J., & Brabec, C. J. (2006) · Advanced Materials · doi:10.1002/adma.200501717 · Cited by 5,205
Ma, W., Yang, C., Gong, X., Lee, K., & Heeger, A. J. (2005) · Advanced Functional Materials · doi:10.1002/adfm.200500211 · Cited by 4,565
Bulk heterojunction solar cells with internal quantum efficiency approaching 100%
Park, S. H., Roy, A., Beaupré, S., Cho, S., Coates, N., Moon, J. S., Moses, D., Leclerc, M., Lee, K., & Heeger, A. J. (2009) · Nature Photonics · doi:10.1038/nphoton.2009.69 · Cited by 4,073
Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols
Peet, J., Kim, J. Y., Coates, N. E., Ma, W. L., Moses, D., Heeger, A. J., & Bazan, G. C. (2007) · Nature Materials · doi:10.1038/nmat1928 · Cited by 3,202
Polymer solar cells with enhanced open-circuit voltage and efficiency
Chen, H.-Y., Hou, J., Zhang, S., Liang, Y., Yang, G., Yang, Y., Yu, L., Wu, Y., & Li, G. (2009) · Nature Photonics · doi:10.1038/nphoton.2009.192 · Cited by 3,087
Kim, Y., Cook, S., Tuladhar, S. M., Choulis, S. A., Nelson, J., Durrant, J. R., Bradley, D. D. C., Giles, M., McCulloch, I., Ha, C.-S., et al. (2006) · Nature Materials · doi:10.1038/nmat1574 · Cited by 2,312
Origin of the Open Circuit Voltage of Plastic Solar Cells
Brabec, C. J., Cravino, A., Meissner, D., Sariciftci, N. S., Fromherz, T., Rispens, M. T., Sanchez, L., & Hummelen, J. C. (2001) · Advanced Functional Materials · doi:10.1002/1616-3028(200110)11:5<374::aid-adfm374>3.0.co;2-w · Cited by 1,808
A Low‐Bandgap Poly(2,7‐Carbazole) Derivative for Use in High‐Performance Solar Cells
Blouin, N., Michaud, A., & Leclerc, M. (2007) · Advanced Materials · doi:10.1002/adma.200602496 · Cited by 1,260
Cited by
Li, Y. (2012) · Accounts of Chemical Research · doi:10.1021/ar2002446 · Cited by 2,756
Self-citationSmall Molecule Organic Semiconductors on the Move: Promises for Future Solar Energy Technology
Mishra, A., & Bäuerle, P. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201102326 · Cited by 1,816
Small molecule semiconductors for high-efficiency organic photovoltaics
Lin, Y., Li, Y., & Zhan, X. (2012) · Chemical Society Reviews · doi:10.1039/c2cs15313k · Cited by 1,751
Self-citationFullerene derivative acceptors for high performance polymer solar cells
He, Y., & Li, Y. (2011) · Phys. Chem. Chem. Phys. · doi:10.1039/c0cp01178a · Cited by 941
Self-citationHigh efficiency flexible perovskite solar cells using superior low temperature TiO2
Yang, D., Yang, R., Zhang, J., Yang, Z., (Frank) Liu, S., & Li, C. (2015) · Energy & Environmental Science · doi:10.1039/c5ee02155c · Cited by 570
Functional fullerenes for organic photovoltaics
Li, C.-Z., Yip, H.-L., & Jen, A. K.-Y. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm15126j · Cited by 521
Su, Y.-W., Lan, S.-C., & Wei, K.-H. (2012) · Materials Today · doi:10.1016/s1369-7021(13)70013-0 · Cited by 454
Zhang, M., Guo, X., Zhang, S., & Hou, J. (2014) · Advanced Materials · doi:10.1002/adma.201304427 · Cited by 425
Structures and properties of conjugated Donor–Acceptor copolymers for solar cell applications
Zhang, Z., & Wang, J. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm14951f · Cited by 348
Duffy, M. P., Delaunay, W., Bouit, P.-A., & Hissler, M. (2016) · Chemical Society Reviews · doi:10.1039/c6cs00257a · Cited by 337
Review: Fullerene based acceptors for efficient bulk heterojunction organic solar cell applications
Ganesamoorthy, R., Sathiyan, G., & Sakthivel, P. (2017) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2016.11.024 · Cited by 323
He, Z., Wu, H., & Cao, Y. (2014) · Advanced Materials · doi:10.1002/adma.201303391 · Cited by 258
Zhang, M., Guo, X., Wang, X., Wang, H., & Li, Y. (2011) · Chemistry of Materials · doi:10.1021/cm2019586 · Cited by 194
Self-citation
Metadata
- Authors
- He, Y., Zhao, G., Peng, B., & Li, Y.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2010-08-18
- Volume
- 20
- Issue
- 19
- Pages
- 3383-3389
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2114758954
- Cited by
- 305
- References
- 32
- FWCI
- 32.89
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.