The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
Ultrasensitive and Highly Selective Gas Sensors Based on Electrospun SnO2 Nanofibers Modified by Pd Loading
Abstract
This work presents a new route to suppress grain growth and tune the sensitivity and selectivity of nanocrystalline SnO 2 fibers. Unloaded and Pd‐loaded SnO 2 nanofiber mats are synthesized by electrospinning followed by hot‐pressing at 80 °C and calcination at 450 or 600 °C. The chemical composition and microstructure evolution as a function of Pd‐loading and calcination temperature are examined using EDS, XPS, XRD, SEM, and HRTEM. Highly porous fibrillar morphology with nanocrystalline fibers comprising SnO 2 crystallites decorated with tiny PdO crystallites is observed. The grain size of the SnO 2 crystallites in the layers that are calcined at 600 °C decreases with increasing Pd concentration from about 15 nm in the unloaded specimen to about 7 nm in the 40 mol% Pd‐loaded specimen, indicating that Pd‐loading could effectively suppress the SnO 2 grain growth during the calcination step. The Pd‐loaded SnO 2 sensors have 4 orders of magnitude higher resistivity and exhibit significantly enhanced sensitivity to H 2 and lower sensitivity to NO 2 compared to their unloaded counterparts. These observations are attributed to enhanced electron depletion at the surface of the PdO‐decorated SnO 2 crystallites and catalytic effect of PdO in promoting the oxidation of H 2 into H 2 O. These phenomena appear to have a much larger effect on the sensitivity of the Pd‐loaded sensors than the reduction in grain size.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrospinning: A Fascinating Method for the Preparation of Ultrathin Fibers
Greiner, A., & Wendorff, J. H. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200604646 · Cited by 4,241
The surface and materials science of tin oxide
Batzill, M., & Diebold, U. (2005) · Progress in Surface Science · doi:10.1016/j.progsurf.2005.09.002 · Cited by 2,557
Grain size effects on gas sensitivity of porous SnO2-based elements
Xu, C., Tamaki, J., Miura, N., & Yamazoe, N. (1991) · Sensors and Actuators B: Chemical · doi:10.1016/0925-4005(91)80207-z · Cited by 1,426
Kolmakov, A., Klenov, D. O., Lilach, Y., Stemmer, S., & Moskovits, M. (2005) · Nano Letters · doi:10.1021/nl050082v · Cited by 1,385
Highly ordered nanowire arrays on plastic substrates for ultrasensitive flexible chemical sensors
McAlpine, M. C., Ahmad, H., Wang, D., & Heath, J. R. (2007) · Nature Materials · doi:10.1038/nmat1891 · Cited by 959
Fabricating Genetically Engineered High-Power Lithium-Ion Batteries Using Multiple Virus Genes
Lee, Y. J., Yi, H., Kim, W.-J., Kang, K., Yun, D. S., Strano, M. S., Ceder, G., & Belcher, A. M. (2009) · Science · doi:10.1126/science.1171541 · Cited by 748
Effects of additives on semiconductor gas sensors
Yamazoe, N., Kurokawa, Y., & Seiyama, T. (1983) · Sensors and Actuators · doi:10.1016/0250-6874(83)85034-3 · Cited by 715
Bai, Y., Cao, Y., Zhang, J., Wang, M., Li, R., Wang, P., Zakeeruddin, S. M., & Grätzel, M. (2008) · Nature Materials · doi:10.1038/nmat2224 · Cited by 645
The effect of grain size on the sensitivity of nanocrystalline metal-oxide gas sensors
Rothschild, A., & Komem, Y. (2004) · Journal of Applied Physics · doi:10.1063/1.1728314 · Cited by 628
Self-citationUltrasensitive Chemiresistors Based on Electrospun TiO2 Nanofibers
Kim, I.-D., Rothschild, A., Lee, B. H., Kim, D. Y., Jo, S. M., & Tuller, H. L. (2006) · Nano Letters · doi:10.1021/nl061197h · Cited by 593
Self-citation
Cited by
Functional materials by electrospinning of polymers
Agarwal, S., Greiner, A., & Wendorff, J. H. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.02.001 · Cited by 925
Metal-Organic Frameworks for Chemiresistive Sensors
Koo, W.-T., Jang, J.-S., & Kim, I.-D. (2019) · Chem · doi:10.1016/j.chempr.2019.04.013 · Cited by 680
Self-citationSynergistic effects in gas sensing semiconducting oxide nano-heterostructures: A review
Walker, J. M., Akbar, S. A., & Morris, P. A. (2019) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2019.01.049 · Cited by 602
Advances in Noble Metal-Decorated Metal Oxide Nanomaterials for Chemiresistive Gas Sensors: Overview
Zhu, L.-Y., Ou, L.-X., Mao, L.-W., Wu, X.-Y., Liu, Y.-P., & Lu, H.-L. (2023) · Nano-Micro Letters · doi:10.1007/s40820-023-01047-z · Cited by 553
Wang, X., Ding, B., Sun, G., Wang, M., & Yu, J. (2013) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.05.001 · Cited by 533
Selectivity in Chemiresistive Gas Sensors: Strategies and Challenges
Bulemo, P. M., Kim, D.-H., Shin, H., Cho, H.-J., Koo, W.-T., Choi, S.-J., Park, C., Ahn, J., Güntner, A. T., Penner, R. M., et al. (2025) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00592 · Cited by 418
Self-citationElectrospun polyimide nanofiber-based nonwoven separators for lithium-ion batteries
Miao, Y.-E., Zhu, G.-N., Hou, H., Xia, Y.-Y., & Liu, T. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.10.027 · Cited by 416
Jeong, S., Kim, J., & Lee, J. (2020) · Advanced Materials · doi:10.1002/adma.202002075 · Cited by 415
MOF‐Based Chemiresistive Gas Sensors: Toward New Functionalities
Jo, Y., Jo, Y. K., Lee, J., Jang, H. W., Hwang, I., & Yoo, D. J. (2023) · Advanced Materials · doi:10.1002/adma.202206842 · Cited by 410
Physically Flexible, Rapid‐Response Gas Sensor Based on Colloidal Quantum Dot Solids
Liu, H., Li, M., Voznyy, O., Hu, L., Fu, Q., Zhou, D., Xia, Z., Sargent, E. H., & Tang, J. (2014) · Advanced Materials · doi:10.1002/adma.201304366 · Cited by 401
Choi, S.-J., Jang, B.-H., Lee, S.-J., Min, B. K., Rothschild, A., & Kim, I.-D. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am405088q · Cited by 393
Self-citationShin, J., Choi, S., Lee, I., Youn, D., Park, C. O., Lee, J., Tuller, H. L., & Kim, I. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201202729 · Cited by 391
Self-citationSeparators for Lithium‐Ion Batteries: A Review on the Production Processes and Recent Developments
Deimede, V., & Elmasides, C. (2015) · Energy Technology · doi:10.1002/ente.201402215 · Cited by 382
Advances and new directions in gas-sensing devices
Kim, I.-D., Rothschild, A., & Tuller, H. L. (2013) · Acta Materialia · doi:10.1016/j.actamat.2012.10.041 · Cited by 343
Self-citation2D PdAg Alloy Nanodendrites for Enhanced Ethanol Electroxidation
Huang, W., Kang, X., Xu, C., Zhou, J., Deng, J., Li, Y., & Cheng, S. (2018) · Advanced Materials · doi:10.1002/adma.201706962 · Cited by 323
Volanti, D. P., Felix, A. A., Orlandi, M. O., Whitfield, G., Yang, D., Longo, E., Tuller, H. L., & Varela, J. A. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201202332 · Cited by 315
Self-citationChoi, S.-J., Lee, I., Jang, B.-H., Youn, D.-Y., Ryu, W.-H., Park, C. O., & Kim, I.-D. (2013) · Analytical Chemistry · doi:10.1021/ac303148a · Cited by 311
Self-citationCoaxial electrospun fibers: applications in drug delivery and tissue engineering
Lu, Y., Huang, J., Yu, G., Cardenas, R., Wei, S., Wujcik, E. K., & Guo, Z. (2016) · WIREs Nanomedicine and Nanobiotechnology · doi:10.1002/wnan.1391 · Cited by 284
Nanowire Chemical/Biological Sensors: Status and a Roadmap for the Future
Fennell, J. F., Liu, S. F., Azzarelli, J. M., Weis, J. G., Rochat, S., Mirica, K. A., Ravnsbæk, J. B., & Swager, T. M. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201505308 · Cited by 274
Huang, Y., Miao, Y.-E., Zhang, L., Tjiu, W. W., Pan, J., & Liu, T. (2014) · Nanoscale · doi:10.1039/c4nr02014f · Cited by 141
Fazio, E., Leonardi, S. G., Santoro, M., Donato, N., Neri, G., & Neri, F. (2018) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2018.01.217 · Cited by 14
Metadata
- Authors
- Yang, D., Kamienchick, I., Youn, D. Y., Rothschild, A., & Kim, I.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2010-09-07
- Volume
- 20
- Issue
- 24
- Pages
- 4258-4264
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2010691608
- Cited by
- 404
- References
- 20
- FWCI
- 16.45
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.