The DOI matches its Crossref record.
Nanostructured TiO2 and Its Application in Lithium‐Ion Storage
Abstract
Titania nanorods and nanowires are synthesized via a hydrothermal reaction of amorphous TiO 2 in alkaline NaOH, followed by ion exchange in HCl aqueous solution, and dehydration at 400 °C. Although the hydrothermal treatment produces three different particle morphologies depending on the reaction time (nanosheets, nanorods, and nanowires), the products exhibit the same crystal structure. Ion exchange of Na 2 Ti 3 O 7 in HCl aqueous solution brings about a phase change to H 2 Ti 3 O 7, but there is no change in the particle morphology. Dehydration of the nanostructured H 2 Ti 3 O 7 leads to two types of crystal structure—anatase TiO 2 for the nanorods, and TiO 2–B for the nanowires—although no significant difference is found in the morphology of the products even after dehydration. The nanorods are 40–50 nm in length and 10 nm in diameter, whereas the nanowires are several micrometers in length and tens to hundreds of nanometers in thickness. In‐situ X‐ray diffraction revealed the formation of anatase TiO 2 from the TiO 2–B above 450 °C. This finding implies that the phase transformation occurs rather slowly for the TiO 2–B nanowires due to the larger particle size and higher crystallinity of H 2 Ti 3 O 7. Tests with Li‐metal half cells indicated that the anatase TiO 2 nanorods are more favorable for the storage and release of Li ions because of their greater surface area than the TiO 2–B nanowires.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Research Development on Sodium-Ion Batteries
Yabuuchi, N., Kubota, K., Dahbi, M., & Komaba, S. (2014) · Chemical Reviews · doi:10.1021/cr500192f · Cited by 6,478
Self-citationMetal Oxides and Oxysalts as Anode Materials for Li Ion Batteries
Reddy, M. V., Subba Rao, G. V., & Chowdari, B. V. R. (2013) · Chemical Reviews · doi:10.1021/cr3001884 · Cited by 2,921
Electrode Degradation in Lithium-Ion Batteries
Pender, J. P., Jha, G., Youn, D. H., Ziegler, J. M., Andoni, I., Choi, E. J., Heller, A., Dunn, B. S., Weiss, P. S., Penner, R. M., et al. (2020) · ACS Nano · doi:10.1021/acsnano.9b04365 · Cited by 873
Sodium‐Ion Battery Materials and Electrochemical Properties Reviewed
Chayambuka, K., Mulder, G., Danilov, D. L., & Notten, P. H. L. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800079 · Cited by 733
Zhao, B., Ran, R., Liu, M., & Shao, Z. (2015) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2015.10.001 · Cited by 644
Negative electrodes for Na-ion batteries
Dahbi, M., Yabuuchi, N., Kubota, K., Tokiwa, K., & Komaba, S. (2014) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp00826j · Cited by 623
Self-citationHierarchical SnO2 Nanostructures: Recent Advances in Design, Synthesis, and Applications
Wang, H., & Rogach, A. L. (2014) · Chemistry of Materials · doi:10.1021/cm4018248 · Cited by 584
Hierarchically Nanostructured Transition Metal Oxides for Lithium‐Ion Batteries
Zheng, M., Tang, H., Li, L., Hu, Q., Zhang, L., Xue, H., & Pang, H. (2018) · Advanced Science · doi:10.1002/advs.201700592 · Cited by 571
Two‐Dimensional Nanoarchitectures for Lithium Storage
Liu, J., & Liu, X. (2012) · Advanced Materials · doi:10.1002/adma.201104993 · Cited by 543
Titanium‐Based Anode Materials for Safe Lithium‐Ion Batteries
Chen, Z., Belharouak, I., Sun, Y. ‐., & Amine, K. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200698 · Cited by 525
Self-citationYang, S. J., Nam, S., Kim, T., Im, J. H., Jung, H., Kang, J. H., Wi, S., Park, B., & Park, C. R. (2013) · Journal of the American Chemical Society · doi:10.1021/ja311550t · Cited by 518
Fröschl, T., Hörmann, U., Kubiak, P., Kučerová, G., Pfanzelt, M., Weiss, C. K., Behm, R. J., Hüsing, N., Kaiser, U., Landfester, K., et al. (2012) · Chemical Society Reviews · doi:10.1039/c2cs35013k · Cited by 449
Nanosheet‐Constructed Porous TiO2–B for Advanced Lithium Ion Batteries
Liu, S., Jia, H., Han, L., Wang, J., Gao, P., Xu, D., Yang, J., & Che, S. (2012) · Advanced Materials · doi:10.1002/adma.201201036 · Cited by 377
A Flexible TiO2(B)‐Based Battery Electrode with Superior Power Rate and Ultralong Cycle Life
Liu, S., Wang, Z., Yu, C., Wu, H. B., Wang, G., Dong, Q., Qiu, J., Eychmüller, A., & (David) Lou, X. W. (2013) · Advanced Materials · doi:10.1002/adma.201300953 · Cited by 305
Alby, D., Charnay, C., Heran, M., Prelot, B., & Zajac, J. (2018) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2017.10.047 · Cited by 295
Xin, X., Zhou, X., Wu, J., Yao, X., & Liu, Z. (2012) · ACS Nano · doi:10.1021/nn304725m · Cited by 291
Zhang, G., Wu, H. B., Song, T., Paik, U., & Lou, X. W. (. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201406476 · Cited by 277
Metadata
- Authors
- Myung, S., Takahashi, N., Komaba, S., Yoon, C. S., Sun, Y., Amine, K., & Yashiro, H.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2011-07-04
- Volume
- 21
- Issue
- 17
- Pages
- 3231-3241
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2059740042
- Cited by
- 162
- References
- 0
- FWCI
- 14.26
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.