Low‐Temperature, Nontoxic Water‐Induced Metal‐Oxide Thin Films and Their Application in Thin‐Film Transistors
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Here, a simple, nontoxic, and inexpensive “water‐inducement” technique for the fabrication of oxide thin films at low annealing temperatures is reported. For water‐induced (WI) precursor solution, the solvent is composed of water without additional organic additives and catalysts. The thermogravimetric analysis indicates that the annealing temperature can be lowered by prolonging the annealing time. A systematic study is carried out to reveal the annealing condition dependence on the performance of the thin‐film transistors (TFTs). The WI indium‐zinc oxide (IZO) TFT integrated on SiO 2 dielectric, annealed at 300 °C for 2 h, exhibits a saturation mobility of 3.35 cm 2 V−1 s−1 and an on‐to‐off current ratio of ≈10 8. Interestingly, through prolonging the annealing time to 4 h, the electrical parameters of IZO TFTs annealed at 230 °C are comparable with the TFTs annealed at 300 °C. Finally, fully WI IZO TFT based on YOx dielectric is integrated and investigated. This TFT device can be regarded as “green electronics” in a true sense, because no organic‐related additives are used during the whole device fabrication process. The as‐fabricated IZO/YOx TFT exhibits excellent electron transport characteristics with low operating voltage (≈1.5 V), small subthreshold swing voltage of 65 mV dec−1 and the mobility in excess of 25 cm 2 V−1 s−1.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cited by
The 2016 oxide electronic materials and oxide interfaces roadmap
Lorenz, M., Ramachandra Rao, M. S., Venkatesan, T., Fortunato, E., Barquinha, P., Branquinho, R., Salgueiro, D., Martins, R., Carlos, E., Liu, A., et al. (2016) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/49/43/433001 · Cited by 314
Self-citationSim, K., Rao, Z., Zou, Z., Ershad, F., Lei, J., Thukral, A., Chen, J., Huang, Q.-A., Xiao, J., & Yu, C. (2019) · Science Advances · doi:10.1126/sciadv.aav9653 · Cited by 305
Metadata
- Authors
- Liu, G., Liu, A., Zhu, H., Shin, B., Fortunato, E., Martins, R., Wang, Y., & Shan, F.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2015-03-19
- Volume
- 25
- Issue
- 17
- Pages
- 2564-2572
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2043646598
- Cited by
- 183
- References
- 1
- FWCI
- 12.19
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Low‐Temperature, Nontoxic Water‐Induced Metal‐Oxide Thin Films and Their Application in Thin‐Film Transistors. https://app.cochat.ai/papers/10.1002/adfm.201500056
- The paper
- Liu, G., Liu, A., Zhu, H., Shin, B., Fortunato, E., Martins, R., Wang, Y., & Shan, F. (2015). Low‐Temperature, Nontoxic Water‐Induced Metal‐Oxide Thin Films and Their Application in Thin‐Film Transistors. Advanced Functional Materials. https://doi.org/10.1002/adfm.201500056
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.