The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Low Cost, Robust, Environmentally Friendly Geopolymer–Mesoporous Carbon Composites for Efficient Solar Powered Steam Generation
Abstract
High‐efficiency, environment friendly, renewable energy‐based methods of desalination represent attractive and potentially very powerful solutions to the long‐standing problem of global water shortage. Many new laboratory‐scale materials have been developed for photothermal desalination but the development of low‐cost, easy‐to‐manufacture, and scalable materials and systems that can convert solar irradiation into exploitable thermal energy in this context is still a significant challenge. This paper presents work on a geopolymer–biomass mesoporous carbon composite (GBMCC) device with mesoporous and macroporous structures for harvesting solar energy, which is then used in a device to generate water vapor with high efficiency using negative pressure, wind‐driven, steam generation. The GBMCC device gives water evaporation rates of 1.58 and 2.71 kg m−2 h−1 under 1 and 3 suns illumination, with the solar thermal conversion efficiency up to 84.95% and 67.6%, respectively. A remarkable, record high water vapor generation rate of 7.55 kg m−2 h−1 is achieved under 1 sun solar intensity at the wind speed of 3 m s−1. This is a key step forward todays efficient, sustainable and economical production of clean water from seawater or common wastewater with free solar energy.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Solar steam generation by heat localization
Ghasemi, H., Ni, G., Marconnet, A. M., Loomis, J., Yerci, S., Miljkovic, N., & Chen, G. (2014) · Nature Communications · doi:10.1038/ncomms5449 · Cited by 2,333
Highly efficient solar vapour generation via hierarchically nanostructured gels
Zhao, F., Zhou, X., Shi, Y., Qian, X., Alexander, M., Zhao, X., Mendez, S., Yang, R., Qu, L., & Yu, G. (2018) · Nature Nanotechnology · doi:10.1038/s41565-018-0097-z · Cited by 2,089
Solar-thermal conversion and thermal energy storage of graphene foam-based composites
Zhang, L., Li, R., Tang, B., & Wang, P. (2016) · Nanoscale · doi:10.1039/c6nr03921a · Cited by 217
Cited by
Li, Y., Shi, Y., Wang, H., Liu, T., Zheng, X., Gao, S., & Lu, J. (2023) · Carbon Energy · doi:10.1002/cey2.331 · Cited by 460
Over 10 kg m−2 h−1 Evaporation Rate Enabled by a 3D Interconnected Porous Carbon Foam
Li, J., Wang, X., Lin, Z., Xu, N., Li, X., Liang, J., Zhao, W., Lin, R., Zhu, B., Liu, G., et al. (2020) · Joule · doi:10.1016/j.joule.2020.02.014 · Cited by 455
Zhang, Y., Xiong, T., Nandakumar, D. K., & Tan, S. C. (2020) · Advanced Science · doi:10.1002/advs.201903478 · Cited by 414
Zhou, J., Gu, Y., Liu, P., Wang, P., Miao, L., Liu, J., Wei, A., Mu, X., Li, J., & Zhu, J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201903255 · Cited by 396
Portable Low‐Pressure Solar Steaming‐Collection Unisystem with Polypyrrole Origamis
Li, W., Li, Z., Bertelsmann, K., & Fan, D. E. (2019) · Advanced Materials · doi:10.1002/adma.201900720 · Cited by 374
Metadata
- Authors
- Liu, F., Zhao, B., Wu, W., Yang, H., Ning, Y., Lai, Y., & Bradley, R.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2018-09-25
- Volume
- 28
- Issue
- 47
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2892442372
- Cited by
- 171
- References
- 3
- FWCI
- 4.92
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Low Cost, Robust, Environmentally Friendly Geopolymer–Mesoporous Carbon Composites for Efficient Solar Powered Steam Generation. https://app.cochat.ai/papers/10.1002/adfm.201803266
- The paper
- Liu, F., Zhao, B., Wu, W., Yang, H., Ning, Y., Lai, Y., & Bradley, R. (2018). Low Cost, Robust, Environmentally Friendly Geopolymer–Mesoporous Carbon Composites for Efficient Solar Powered Steam Generation. Advanced Functional Materials. https://doi.org/10.1002/adfm.201803266
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.