The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Rational Design of Porous Nanofiber Adsorbent by Blow‐Spinning with Ultrahigh Uranium Recovery Capacity from Seawater
Abstract
Highly efficient recovery of uranium from seawater is of great concern because of the growing demand for nuclear energy. The use of amidoxime‐based polymeric fiber adsorbents is considered to be a promising approach because of their relatively high specificity and affinity to uranyl. The surface area, hydrophility, and surface charge of the adsorbent are reported to be critical factors that influence uranium recovery efficiency. Here, a porous amidoxime‐based nanofiber adsorbent (SMON–PAO) that exhibits the highest uranium recovery capacity among the existing fiber adsorbents both in 8 ppm uranium spiked seawater (1089.36 ± 64.31 mg‐U per g‐Ads) and in natural seawater (9.59 ± 0.64 mg‐U per g‐Ads) is prepared by blow spinning. These nanofibers are obtained by compositing polyacrylamidoxime with montmorillonite and exhibit the increased surface area and more exposed functional amidoxime moieties for uranyl adsorption. The residual montmorillonite enhances the hydrophility and reduces the negative surface charge, thereby increasing the contact of the adsorbent with seawater and reducing the charge repulsion between negative amidoxime group and negative uranyl species ([UO 2(CO 3)3]4−). The finding of this study indicates that rational design of uranium recovery adsorbents by comprehensive utilizing the key factors that influence uranium recovery performance is a promising approach for developing economically feasible uranium recovery materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fouling Release Coatings: A Nontoxic Alternative to Biocidal Antifouling Coatings
Lejars, M., Margaillan, A., & Bressy, C. (2012) · Chemical Reviews · doi:10.1021/cr200350v · Cited by 1,268
Materials for the Recovery of Uranium from Seawater
Abney, C. W., Mayes, R. T., Saito, T., & Dai, S. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00355 · Cited by 1,053
Liu, C., Hsu, P.-C., Xie, J., Zhao, J., Wu, T., Wang, H., Liu, W., Zhang, J., Chu, S., & Cui, Y. (2017) · Nature Energy · doi:10.1038/nenergy.2017.7 · Cited by 676
Recovery of Uranium from Seawater: A Review of Current Status and Future Research Needs
Kim, J., Tsouris, C., Mayes, R. T., Oyola, Y., Saito, T., Janke, C. J., Dai, S., Schneider, E., & Sachde, D. (2013) · Separation Science and Technology · doi:10.1080/01496395.2012.712599 · Cited by 492
Chen, L., Bai, Z., Zhu, L., Zhang, L., Cai, Y., Li, Y., Liu, W., Wang, Y., Chen, L., Diwu, J., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b12396 · Cited by 349
A protein engineered to bind uranyl selectively and with femtomolar affinity
Zhou, L., Bosscher, M., Zhang, C., Özçubukçu, S., Zhang, L., Zhang, W., Li, C. J., Liu, J., Jensen, M. P., Lai, L., et al. (2014) · Nature Chemistry · doi:10.1038/nchem.1856 · Cited by 338
Ultralight, scalable, and high-temperature–resilient ceramic nanofiber sponges
Wang, H., Zhang, X., Wang, N., Li, Y., Feng, X., Huang, Y., Zhao, C., Liu, Z., Fang, M., Ou, G., et al. (2017) · Science Advances · doi:10.1126/sciadv.1603170 · Cited by 332
Self-citationYang, P., Liu, Q., Liu, J., Zhang, H., Li, Z., Li, R., Liu, L., & Wang, J. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta10022h · Cited by 318
Functionalized Porous Aromatic Framework for Efficient Uranium Adsorption from Aqueous Solutions
Li, B., Sun, Q., Zhang, Y., Abney, C. W., Aguila, B., Lin, W., & Ma, S. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b01711 · Cited by 281
Tan, L., Wang, Y., Liu, Q., Wang, J., Jing, X., Liu, L., Liu, J., & Song, D. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.08.015 · Cited by 270
Cited by
Uranium extraction from seawater: material design, emerging technologies and marine engineering
Xie, Y., Liu, Z., Geng, Y., Li, H., Wang, N., Song, Y., Wang, X., Chen, J., Wang, J., Ma, S., et al. (2023) · Chemical Society Reviews · doi:10.1039/d2cs00595f · Cited by 457
Self-citationAmidoxime-based materials for uranium recovery and removal
Tang, N., Liang, J., Niu, C., Wang, H., Luo, Y., Xing, W., Ye, S., Liang, C., Guo, H., Guo, J., et al. (2020) · Journal of Materials Chemistry A · doi:10.1039/c9ta14082d · Cited by 426
Li, H., Zhai, F., Gui, D., Wang, X., Wu, C., Zhang, D., Dai, X., Deng, H., Su, X., Diwu, J., et al. (2019) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2019.04.087 · Cited by 364
Self-citationChen, M., Liu, T., Zhang, X., Zhang, R., Tang, S., Yuan, Y., Xie, Z., Liu, Y., Wang, H., Fedorovich, K. V., et al. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202100106 · Cited by 310
Self-citationWu, Y., Xie, Y., Liu, X., Li, Y., Wang, J., Chen, Z., Yang, H., Hu, B., Shen, C., Tang, Z., et al. (2023) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2023.215097 · Cited by 296
Self-citationChen, Z., He, X., Li, Q., Yang, H., Liu, Y., Wu, L., Liu, Z., Hu, B., & Wang, X. (2022) · Journal of Environmental Sciences · doi:10.1016/j.jes.2021.10.003 · Cited by 56
Self-citation
Metadata
- Authors
- Yuan, Y., Zhao, S., Wen, J., Wang, D., Guo, X., Xu, L., Wang, X., & Wang, N.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2018-11-20
- Volume
- 29
- Issue
- 2
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2901112514
- Cited by
- 262
- References
- 27
- FWCI
- 8.67
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.