The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Enhancing the Capacitive Storage Performance of Carbon Fiber Textile by Surface and Structural Modulation for Advanced Flexible Asymmetric Supercapacitors
Abstract
The exploration of high‐energy anodes with good mechanical properties is highly attractive for flexible asymmetric supercapacitors (ASCs) but challenging. Owing to the excellent conductivity and superior mechanical flexibility, carbon fiber textile (CFT) holds great promise as a substrate/current‐collector for fabricating flexible electrodes. Yet, it is rarely used as a flexible active electrode in terms of its low electrochemical reactivity and small accessible area. In this work, an effective surface and structural modulation strategy is developed to directly tune CFT into a highly active anode for flexible ASCs by creating hierarchical pores and numerous pseudocapacitive oxygenic groups. Arising from large surface and increased active sites, the as‐prepared activated porous CFT (APCFT) electrode not only achieves a large capacitance (1.2 F cm−2 at 4 mA cm−2) and fast kinetics but also shows satisfying cycling durability (no capacitance decay after 25 000 cycles). More importantly, an advanced flexible ASC device with an impressive energy density of 4.70 mWh cm−3 is successfully assembled by employing this APCFT as an anode, outperforming most recently reported ASC devices. This dual modification strategy may throw light on the rational design of new generation advanced carbon electrodes for high‐performance flexible supercapacitors.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Where do batteries end and supercapacitors begin?
Simon, P., Gogotsi, Y., & Dunn, B. (2014) · Science · doi:10.1126/science.1249625 · Cited by 5,634
Reduction of graphene oxide via l -ascorbic acid
Zhang, J., Yang, H., Shen, G., Cheng, P., Zhang, J., & Guo, S. (2010) · Chem. Commun. · doi:10.1039/b917705a · Cited by 2,344
Cited by
Feng, X., Bai, Y., Liu, M., Li, Y., Yang, H., Wang, X., & Wu, C. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00166c · Cited by 761
Effects of oxygen-containing functional groups on carbon materials in supercapacitors: A review
Qiu, C., Jiang, L., Gao, Y., & Sheng, L. (2023) · Materials & Design · doi:10.1016/j.matdes.2023.111952 · Cited by 761
Synthesis Strategies of Porous Carbon for Supercapacitor Applications
Yin, J., Zhang, W., Alhebshi, N. A., Salah, N., & Alshareef, H. N. (2020) · Small Methods · doi:10.1002/smtd.201900853 · Cited by 671
Zhang, H., Liu, Q., Fang, Y., Teng, C., Liu, X., Fang, P., Tong, Y., & Lu, X. (2019) · Advanced Materials · doi:10.1002/adma.201904948 · Cited by 534
Self-citationPore and Heteroatom Engineered Carbon Foams for Supercapacitors
Peng, H., Yao, B., Wei, X., Liu, T., Kou, T., Xiao, P., Zhang, Y., & Li, Y. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803665 · Cited by 443
Metadata
- Authors
- Han, Y., Lu, Y., Shen, S., Zhong, Y., Liu, S., Xia, X., Tong, Y., & Lu, X.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2018-12-27
- Volume
- 29
- Issue
- 7
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2907300030
- Cited by
- 211
- References
- 2
- FWCI
- 8.98
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Enhancing the Capacitive Storage Performance of Carbon Fiber Textile by Surface and Structural Modulation for Advanced Flexible Asymmetric Supercapacitors. https://app.cochat.ai/papers/10.1002/adfm.201806329
- The paper
- Han, Y., Lu, Y., Shen, S., Zhong, Y., Liu, S., Xia, X., Tong, Y., & Lu, X. (2019). Enhancing the Capacitive Storage Performance of Carbon Fiber Textile by Surface and Structural Modulation for Advanced Flexible Asymmetric Supercapacitors. Advanced Functional Materials. https://doi.org/10.1002/adfm.201806329
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.