The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
High‐Performance Solid Polymer Electrolytes Filled with Vertically Aligned 2D Materials
Abstract
Solid state lithium metal batteries are the most promising next‐generation power sources owing to their high energy density and safety. Solid polymer electrolytes (SPE) have gained wide attention due to the excellent flexibility, manufacturability, lightweight, and low‐cost processing. However, fatal drawbacks of the SPE such as the insufficient ionic conductivity and Li+ transference number at room temperature restrict their practical application. Here vertically aligned 2D sheets are demonstrated as an advanced filler for SPE with enhanced ionic conductivity, Li+ transference number, mechanical modulus, and electrochemical stability, using vermiculite nanosheets as an example. The vertically aligned vermiculite sheets (VAVS), prepared by the temperature gradient freezing, provide aligned, continuous, run‐through polymer‐filler interfaces after infiltrating with polyethylene oxide (PEO)‐based SPE. As a result, ionic conductivity as high as 1.89 × 10−4 S cm−1 at 25 °C is achieved with Li+ transference number close to 0.5. Along with their enhanced mechanical strength, Li|Li symmetric cells using VAVS–CSPE are stable over 1300 h with a low overpotential. LiFePO 4 in all‐solid‐state lithium metal batteries with VAVS–CSPE could deliver a specific capacity of 167 mAh g−1 at 0.1 C at 35 °C and 82% capacity retention after 200 cycles at 0.5 C.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
A solid future for battery development
Janek, J., & Zeier, W. G. (2016) · Nature Energy · doi:10.1038/nenergy.2016.141 · Cited by 3,979
Cited by
Shao, G., Hanaor, D. A. H., Shen, X., & Gurlo, A. (2020) · Advanced Materials · doi:10.1002/adma.201907176 · Cited by 871
Homogeneous and Fast Ion Conduction of PEO‐Based Solid‐State Electrolyte at Low Temperature
Xu, S., Sun, Z., Sun, C., Li, F., Chen, K., Zhang, Z., Hou, G., Cheng, H., & Li, F. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202007172 · Cited by 549
Polymer‐Based Solid Electrolytes: Material Selection, Design, and Application
Xi, G., Xiao, M., Wang, S., Han, D., Li, Y., & Meng, Y. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202007598 · Cited by 421
Wang, H., Sheng, L., Yasin, G., Wang, L., Xu, H., & He, X. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.08.014 · Cited by 410
Zhao, Y., Wang, L., Zhou, Y., Liang, Z., Tavajohi, N., Li, B., & Li, T. (2021) · Advanced Science · doi:10.1002/advs.202003675 · Cited by 387
Metadata
- Authors
- Tang, W., Tang, S., Guan, X., Zhang, X., Xiang, Q., & Luo, J.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2019-02-21
- Volume
- 29
- Issue
- 16
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2917419152
- Cited by
- 208
- References
- 2
- FWCI
- 10.13
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: High‐Performance Solid Polymer Electrolytes Filled with Vertically Aligned 2D Materials. https://app.cochat.ai/papers/10.1002/adfm.201900648
- The paper
- Tang, W., Tang, S., Guan, X., Zhang, X., Xiang, Q., & Luo, J. (2019). High‐Performance Solid Polymer Electrolytes Filled with Vertically Aligned 2D Materials. Advanced Functional Materials. https://doi.org/10.1002/adfm.201900648
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.