The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Electro–Chemo–Mechanical Issues at the Interfaces in Solid‐State Lithium Metal Batteries
Abstract
Effective solid‐state interfacial contact of both the cathode and lithium metal anode with the solid electrolyte (SE) are required to improve the performance of solid‐state lithium metal batteries (SSBs). Electro–chemo–mechanical coupling (ECMC) strongly affects the interfacial stability of SSBs. On one hand, mechanical stress strongly influences interfacial contact and causes side reactions. On the other hand, electrochemical reactions such as lithium deposition cause mechanical deformation and stress at electrode/SE interfaces. To solve the degradation/failure problems of interfaces and provide guidelines to construct high‐performance SSBs, the ECMC at electrode/SE interfaces should be comprehensively investigated. In this review, the problems associated with ECMC at electrode/SE interfaces are summarized. The interfacial degradation/failure mechanisms, including the contact and electrochemical stability of interfaces, are introduced. Mechanical factors affecting interfacial contact and lithium deposition are highlighted. Experimental observation and computational analysis methods for electrode/SE interfaces are then summarized. Strategies to construct stable electrode/SE interfaces, such as assembling stress and wetting layers to improve interfacial contact, 3D SE structure, and plating stress relief to suppress lithium dendrite formation, are reviewed. The remaining challenges to better understanding ECMC and related solutions to aid SSB development are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
In-operando high-speed tomography of lithium-ion batteries during thermal runaway
Finegan, D. P., Scheel, M., Robinson, J. B., Tjaden, B., Hunt, I., Mason, T. J., Millichamp, J., Di Michiel, M., Offer, G. J., Hinds, G., et al. (2015) · Nature Communications · doi:10.1038/ncomms7924 · Cited by 844
Cited by
Lu, Y., Zhao, C., Yuan, H., Cheng, X., Huang, J., & Zhang, Q. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202009925 · Cited by 562
Interface Issues and Challenges in All‐Solid‐State Batteries: Lithium, Sodium, and Beyond
Lou, S., Zhang, F., Fu, C., Chen, M., Ma, Y., Yin, G., & Wang, J. (2021) · Advanced Materials · doi:10.1002/adma.202000721 · Cited by 548
Wu, K., Huang, J., Yi, J., Liu, X., Liu, Y., Wang, Y., Zhang, J., & Xia, Y. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903977 · Cited by 522
The Thermal Stability of Lithium Solid Electrolytes with Metallic Lithium
Chen, R., Nolan, A. M., Lu, J., Wang, J., Yu, X., Mo, Y., Chen, L., Huang, X., & Li, H. (2020) · Joule · doi:10.1016/j.joule.2020.03.012 · Cited by 381
Self-citationSulfide and Oxide Inorganic Solid Electrolytes for All-Solid-State Li Batteries: A Review
Reddy, M. V., Julien, C. M., Mauger, A., & Zaghib, K. (2020) · Nanomaterials · doi:10.3390/nano10081606 · Cited by 331
Metadata
- Authors
- Wang, P., Qu, W., Song, W., Chen, H., Chen, R., & Fang, D.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2019-04-16
- Volume
- 29
- Issue
- 27
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2936560127
- Cited by
- 223
- References
- 1
- FWCI
- 10.22
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Electro–Chemo–Mechanical Issues at the Interfaces in Solid‐State Lithium Metal Batteries. https://app.cochat.ai/papers/10.1002/adfm.201900950
- The paper
- Wang, P., Qu, W., Song, W., Chen, H., Chen, R., & Fang, D. (2019). Electro–Chemo–Mechanical Issues at the Interfaces in Solid‐State Lithium Metal Batteries. Advanced Functional Materials. https://doi.org/10.1002/adfm.201900950
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.