The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Defect Engineering in Two Common Types of Dielectric Materials for Electromagnetic Absorption Applications
Abstract
Dielectric materials are greatly desired for electromagnetic absorption applications. Lots of research shows that conduction loss and polarization are two of the most important factors determining complex permittivity. However, the detailed dissipation mechanisms for the improved microwave absorption performance are often based on semiempirical rules, lacking practical data relationships between conduction loss/polarization and dielectric behaviors. Here, a strategy of introducing point defects is used to understand such underlying relationships, where polarizability and conductivity are adjustable by manipulating oxygen deficiency or heteroatoms. Based on first principles calculations and the applied oxygen‐deficient strategy, dielectric polarization is shown to be dominant in determining the permittivity behaviors in semiconductors. Meanwhile, the presented nitrogen doping strategy shows that conduction loss is dominant in determining the permittivity behavior in graphitized carbon materials. The validity of the methods for using point defects to explore the underlying relations between conduction loss/polarization and dielectric behaviors in semiconductor and graphitized carbon are demonstrated for the first time, which are of great importance in optimizing the microwave absorption performance by defect engineering and electronic structure tailoring.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
Projector augmented-wave method
Blöchl, P. E. (1994) · Physical Review B · doi:10.1103/physrevb.50.17953 · Cited by 92,732
Special points for Brillouin-zone integrations
Monkhorst, H. J., & Pack, J. D. (1976) · Physical Review B · doi:10.1103/physrevb.13.5188 · Cited by 71,721
Hammer, B., Hansen, L. B., & Nørskov, J. K. (1999) · Physical Review B · doi:10.1103/physrevb.59.7413 · Cited by 8,270
Van der Waals Density Functional for General Geometries
Dion, M., Rydberg, H., Schröder, E., Langreth, D. C., & Lundqvist, B. I. (2004) · Physical Review Letters · doi:10.1103/physrevlett.92.246401 · Cited by 5,622
Theory of polarization of crystalline solids
King-Smith, R. D., & Vanderbilt, D. (1993) · Physical Review B · doi:10.1103/physrevb.47.1651 · Cited by 4,472
Zhang, Y., Huang, Y., Zhang, T., Chang, H., Xiao, P., Chen, H., Huang, Z., & Chen, Y. (2015) · Advanced Materials · doi:10.1002/adma.201405788 · Cited by 1,947
Lv, H., Yang, Z., Wang, P. L., Ji, G., Song, J., Zheng, L., Zeng, H., & Xu, Z. J. (2018) · Advanced Materials · doi:10.1002/adma.201706343 · Cited by 954
Self-citationTuning defects in oxides at room temperature by lithium reduction
Ou, G., Xu, Y., Wen, B., Lin, R., Ge, B., Tang, Y., Liang, Y., Yang, C., Huang, K., Zu, D., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-03765-0 · Cited by 722
Liu, W., Zhang, L., Yan, W., Liu, X., Yang, X., Miao, S., Wang, W., Wang, A., & Zhang, T. (2016) · Chemical Science · doi:10.1039/c6sc02105k · Cited by 692
Dielectric polarization in electromagnetic wave absorption: Review and perspective
Quan, B., Liang, X., Ji, G., Cheng, Y., Liu, W., Ma, J., Zhang, Y., Li, D., & Xu, G. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.09.082 · Cited by 677
Self-citationEngineering oxygen vacancy on NiO nanorod arrays for alkaline hydrogen evolution
Zhang, T., Wu, M.-Y., Yan, D.-Y., Mao, J., Liu, H., Hu, W.-B., Du, X.-W., Ling, T., & Qiao, S.-Z. (2018) · Nano Energy · doi:10.1016/j.nanoen.2017.11.015 · Cited by 655
Sharifi, T., Hu, G., Jia, X., & Wågberg, T. (2012) · ACS Nano · doi:10.1021/nn302906r · Cited by 593
Ye, F., Song, Q., Zhang, Z., Li, W., Zhang, S., Yin, X., Zhou, Y., Tao, H., Liu, Y., Cheng, L., et al. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707205 · Cited by 570
Zhang, X., Zhu, J., Yin, P., Guo, A., Huang, A., Guo, L., & Wang, G. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201800761 · Cited by 461
Recent Breakthroughs in Supercapacitors Boosted by Nitrogen‐Rich Porous Carbon Materials
Yang, M., & Zhou, Z. (2017) · Advanced Science · doi:10.1002/advs.201600408 · Cited by 436
Kinetics and mechanisms of charge transfer processes in photocatalytic systems: A review
Zhang, L., Mohamed, H. H., Dillert, R., & Bahnemann, D. (2012) · Journal of Photochemistry and Photobiology C: Photochemistry Reviews · doi:10.1016/j.jphotochemrev.2012.07.002 · Cited by 388
Xu, H., Yin, X., Li, M., Ye, F., Han, M., Hou, Z., Li, X., Zhang, L., & Cheng, L. (2018) · Carbon · doi:10.1016/j.carbon.2018.02.040 · Cited by 364
Yu, L., Yang, J. F., Guan, B. Y., Lu, Y., & Lou, X. W. (. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201712460 · Cited by 318
Quan, B., Liang, X., Ji, G., Ma, J., Ouyang, P., Gong, H., Xu, G., & Du, Y. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b15788 · Cited by 289
Self-citationGe, P., Zhang, C., Hou, H., Wu, B., Zhou, L., Li, S., Wu, T., Hu, J., Mai, L., & Ji, X. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.04.018 · Cited by 275
Nitrogen Dopants in Carbon Nanomaterials: Defects or a New Opportunity?
Lee, W. J., Lim, J., & Kim, S. O. (2017) · Small Methods · doi:10.1002/smtd.201600014 · Cited by 263
Gupta, T. K., Singh, B. P., Singh, V. N., Teotia, S., Singh, A. P., Elizabeth, I., Dhakate, S. R., Dhawan, S. K., & Mathur, R. B. (2014) · Journal of Materials Chemistry A · doi:10.1039/c3ta14854h · Cited by 232
Moitra, D., Dhole, S., Ghosh, B. K., Chandel, M., Jani, R. K., Patra, M. K., Vadera, S. R., & Ghosh, N. N. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.7b02836 · Cited by 124
Zhu, P., Song, J., Lv, D., Wang, D., Jaye, C., Fischer, D. A., Wu, T., & Chen, Y. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp4123634 · Cited by 108
Cited by
Dielectric Loss Mechanism in Electromagnetic Wave Absorbing Materials
Qin, M., Zhang, L., & Wu, H. (2022) · Advanced Science · doi:10.1002/advs.202105553 · Cited by 1,497
Dimensional Design and Core–Shell Engineering of Nanomaterials for Electromagnetic Wave Absorption
Wu, Z., Cheng, H., Jin, C., Yang, B., Xu, C., Pei, K., Zhang, H., Yang, Z., & Che, R. (2022) · Advanced Materials · doi:10.1002/adma.202107538 · Cited by 1,059
Electromagnetic microwave absorption theory and recent achievements in microwave absorbers
Zeng, X., Cheng, X., Yu, R., & Stucky, G. D. (2020) · Carbon · doi:10.1016/j.carbon.2020.07.028 · Cited by 991
Xia, Y., Gao, W., & Gao, C. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202204591 · Cited by 734
Heterointerface Engineering in Electromagnetic Absorbers: New Insights and Opportunities
Liang, L., Gu, W., Wu, Y., Zhang, B., Wang, G., Yang, Y., & Ji, G. (2022) · Advanced Materials · doi:10.1002/adma.202106195 · Cited by 670
Self-citation
Metadata
- Authors
- Quan, B., Shi, W., Ong, S. J. H., Lu, X., Wang, P. L., Ji, G., Guo, Y., Zheng, L., & Xu, Z. J.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2019-05-08
- Volume
- 29
- Issue
- 28
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2944263077
- Cited by
- 634
- References
- 25
- FWCI
- 26.63
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.