The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Flexible RFID Tag Metal Antenna on Paper‐Based Substrate by Inkjet Printing Technology
Abstract
A reliable and low‐cost solution‐processing procedure to synthesize a highly adhesive flexible metal antenna with low resistivity for radio‐frequency identification device (RFID) tags on paper substrates via inkjet printing combined with surface modification and electroless deposition (ELD) is demonstrated in this paper. Through the surface modification of colloidal solution of hydrolyzed stannous chloride and chitosan solution, the paper‐based substrate is able to reduce the penetration rate of ink and further increase the adsorption amount of silver ions, which could create a catalytic activating layer to catalyze the subsequent ELD of a conductive deposited metal antenna. The resulting metal antenna for RFID tags presents good adhesive strength and low resistivity of 2.58 × 10−8 Ω·m after 40 min of ELD, and maintains a reliable reading range of RFID tags even after over 1000 times of bending and mechanical stress. Consequently, the developed technology proposed allows for cheap, efficient, and massive production of metal antenna for paper‐based RFID tags with excellent mechanical and electrical properties. Furthermore, this process is especially advantageous for the fabrication of next‐generation flexible electronic devices based on paper substrates.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Screen printed passive components for flexible power electronics
Ostfeld, A. E., Deckman, I., Gaikwad, A. M., Lochner, C. M., & Arias, A. C. (2015) · Scientific Reports · doi:10.1038/srep15959 · Cited by 119
Cited by
Cellulose‐Based Flexible Functional Materials for Emerging Intelligent Electronics
Zhao, D., Zhu, Y., Cheng, W., Chen, W., Wu, Y., & Yu, H. (2021) · Advanced Materials · doi:10.1002/adma.202000619 · Cited by 842
Flexible/Stretchable Supercapacitors with Novel Functionality for Wearable Electronics
Keum, K., Kim, J. W., Hong, S. Y., Son, J. G., Lee, S., & Ha, J. S. (2020) · Advanced Materials · doi:10.1002/adma.202002180 · Cited by 492
Soft wearable devices for deep-tissue sensing
Lin, M., Hu, H., Zhou, S., & Xu, S. (2022) · Nature Reviews Materials · doi:10.1038/s41578-022-00427-y · Cited by 334
Green Flexible Electronics: Natural Materials, Fabrication, and Applications
Hui, Z., Zhang, L., Ren, G., Sun, G., Yu, H., & Huang, W. (2023) · Advanced Materials · doi:10.1002/adma.202211202 · Cited by 287
Hassan, M., Abbas, G., Li, N., Afzal, A., Haider, Z., Ahmed, S., Xu, X., Pan, C., & Peng, Z. (2022) · Advanced Materials Technologies · doi:10.1002/admt.202100773 · Cited by 284
Metadata
- Authors
- Wang, Y., Yan, C., Cheng, S., Xu, Z., Sun, X., Xu, Y., Chen, J., Jiang, Z., Liang, K., & Feng, Z.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2019-05-22
- Volume
- 29
- Issue
- 29
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2945561261
- Cited by
- 164
- References
- 1
- FWCI
- 7.05
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Flexible RFID Tag Metal Antenna on Paper‐Based Substrate by Inkjet Printing Technology. https://app.cochat.ai/papers/10.1002/adfm.201902579
- The paper
- Wang, Y., Yan, C., Cheng, S., Xu, Z., Sun, X., Xu, Y., Chen, J., Jiang, Z., Liang, K., & Feng, Z. (2019). Flexible RFID Tag Metal Antenna on Paper‐Based Substrate by Inkjet Printing Technology. Advanced Functional Materials. https://doi.org/10.1002/adfm.201902579
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.