The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Ultrafast Laser Pulses Enable One‐Step Graphene Patterning on Woods and Leaves for Green Electronics
Abstract
Fast, simple, cost‐efficient, eco‐friendly, and design‐flexible patterning of high‐quality graphene from abundant natural resources is of immense interest for the mass production of next‐generation graphene‐based green electronics. Most electronic components have been manufactured by repetitive photolithography processes involving a large number of masks, photoresists, and toxic etchants; resulting in slow, complex, expensive, less‐flexible, and often corrosive electronics manufacturing processes to date. Here, a one‐step formation and patterning of highly conductive graphene on natural woods and leaves by programmable irradiation of ultrafast high‐photon‐energy laser pulses in ambient air is presented. Direct photoconversion of woods and leaves into graphene is realized at a low temperature by intense ultrafast light pulses with controlled fluences. Green graphene electronic components of electrical interconnects, flexible temperature sensors, and energy‐storing pseudocapacitors are fabricated from woods and leaves. This direct graphene synthesis is a breakthrough toward biocompatible, biodegradable, and eco‐friendlily manufactured green electronics for the sustainable earth.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Raman Spectrum of Graphene and Graphene Layers
Ferrari, A. C., Meyer, J. C., Scardaci, V., Casiraghi, C., Lazzeri, M., Mauri, F., Piscanec, S., Jiang, D., Novoselov, K. S., Roth, S., et al. (2006) · Physical Review Letters · doi:10.1103/physrevlett.97.187401 · Cited by 15,047
Novoselov, K. S., Fal′ko, V. I., Colombo, L., Gellert, P. R., Schwab, M. G., & Kim, K. (2012) · Nature · doi:10.1038/nature11458 · Cited by 9,251
Pyrolysis of Wood/Biomass for Bio-oil: A Critical Review
Mohan, D., Pittman, C. U., & Steele, P. H. (2006) · Energy & Fuels · doi:10.1021/ef0502397 · Cited by 5,663
Laser Scribing of High-Performance and Flexible Graphene-Based Electrochemical Capacitors
El-Kady, M. F., Strong, V., Dubin, S., & Kaner, R. B. (2012) · Science · doi:10.1126/science.1216744 · Cited by 4,008
Chen, Z., Ren, W., Gao, L., Liu, B., Pei, S., & Cheng, H.-M. (2011) · Nature Materials · doi:10.1038/nmat3001 · Cited by 3,834
Controlling the Electronic Structure of Bilayer Graphene
Ohta, T., Bostwick, A., Seyller, T., Horn, K., & Rotenberg, E. (2006) · Science · doi:10.1126/science.1130681 · Cited by 3,339
Femtosecond, picosecond and nanosecond laser ablation of solids
Chichkov, B. N., Momma, C., Nolte, S., Alvensleben, F., & Tünnermann, A. (1996) · Applied Physics A Materials Science & Processing · doi:10.1007/bf01567637 · Cited by 3,066
Laser-induced porous graphene films from commercial polymers
Lin, J., Peng, Z., Liu, Y., Ruiz-Zepeda, F., Ye, R., Samuel, E. L. G., Yacaman, M. J., Yakobson, B. I., & Tour, J. M. (2014) · Nature Communications · doi:10.1038/ncomms6714 · Cited by 2,946
Ultrafast lasers—reliable tools for advanced materials processing
Sugioka, K., & Cheng, Y. (2014) · Light: Science & Applications · doi:10.1038/lsa.2014.30 · Cited by 1,545
Wood-Derived Materials for Green Electronics, Biological Devices, and Energy Applications
Zhu, H., Luo, W., Ciesielski, P. N., Fang, Z., Zhu, J. Y., Henriksson, G., Himmel, M. E., & Hu, L. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00225 · Cited by 1,532
Direct laser writing of micro-supercapacitors on hydrated graphite oxide films
Gao, W., Singh, N., Song, L., Liu, Z., Reddy, A. L. M., Ci, L., Vajtai, R., Zhang, Q., Wei, B., & Ajayan, P. M. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.110 · Cited by 1,461
Graphene: synthesis and applications
Avouris, P., & Dimitrakopoulos, C. (2012) · Materials Today · doi:10.1016/s1369-7021(12)70044-5 · Cited by 1,101
“Green” electronics: biodegradable and biocompatible materials and devices for sustainable future
Irimia-Vladu, M. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60235d · Cited by 1,044
Laser-Induced Graphene by Multiple Lasing: Toward Electronics on Cloth, Paper, and Food
Chyan, Y., Ye, R., Li, Y., Singh, S. P., Arnusch, C. J., & Tour, J. M. (2018) · ACS Nano · doi:10.1021/acsnano.7b08539 · Cited by 1,033
Inducing and probing non-thermal transitions in semiconductors using femtosecond laser pulses
Sundaram, S. K., & Mazur, E. (2002) · Nature Materials · doi:10.1038/nmat767 · Cited by 1,023
Plasmonic Wood for High‐Efficiency Solar Steam Generation
Zhu, M., Li, Y., Chen, F., Zhu, X., Dai, J., Li, Y., Yang, Z., Yan, X., Song, J., Wang, Y., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701028 · Cited by 937
Heat accumulation effects in femtosecond laser-written waveguides with variable repetition rate
Eaton, S. M., Zhang, H., Herman, P. R., Yoshino, F., Shah, L., Bovatsek, J., & Arai, A. Y. (2005) · Optics Express · doi:10.1364/opex.13.004708 · Cited by 813
Ye, R., James, D. K., & Tour, J. M. (2018) · Accounts of Chemical Research · doi:10.1021/acs.accounts.8b00084 · Cited by 795
All-wood, low tortuosity, aqueous, biodegradable supercapacitors with ultra-high capacitance
Chen, C., Zhang, Y., Li, Y., Dai, J., Song, J., Yao, Y., Gong, Y., Kierzewski, I., Xie, J., & Hu, L. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03716j · Cited by 744
Laser‐Induced Graphene Formation on Wood
Ye, R., Chyan, Y., Zhang, J., Li, Y., Han, X., Kittrell, C., & Tour, J. M. (2017) · Advanced Materials · doi:10.1002/adma.201702211 · Cited by 665
Sumboja, A., Foo, C. Y., Wang, X., & Lee, P. S. (2013) · Advanced Materials · doi:10.1002/adma.201205064 · Cited by 616
Self-citationMethods of graphite exfoliation
Cai, M., Thorpe, D., Adamson, D. H., & Schniepp, H. C. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm34517j · Cited by 508
Flexible and Stackable Laser-Induced Graphene Supercapacitors
Peng, Z., Lin, J., Ye, R., Samuel, E. L. G., & Tour, J. M. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am509065d · Cited by 470
The Chemistry of Graphene Oxide
Gao, W. (2015) · Graphene Oxide · doi:10.1007/978-3-319-15500-5_3 · Cited by 459
Damage threshold for ion-beam induced graphitization of diamond
Uzan-Saguy, C., Cytermann, C., Brener, R., et al. (1995) · Applied Physics Letters · doi:10.1063/1.115004 · Cited by 313
Chitin Nanofiber Transparent Paper for Flexible Green Electronics
Jin, J., Lee, D., Im, H., Han, Y. C., Jeong, E. G., Rolandi, M., Choi, K. C., & Bae, B. (2016) · Advanced Materials · doi:10.1002/adma.201600336 · Cited by 280
Kwon, J., Cho, H., Eom, H., Lee, H., Suh, Y. D., Moon, H., Shin, J., Hong, S., & Ko, S. H. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b12714 · Cited by 199
Kandola, B. K., & Horrocks, A. R. (1996) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(96)00054-7 · Cited by 176
All-Graphene-Based Highly Flexible Noncontact Electronic Skin
An, J., Le, T. D., Huang, Y., Zhan, Z., Li, Y., Zheng, L., Huang, W., Sun, G., & Kim, Y. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b13701 · Cited by 143
Self-citationSingle‐Step Selective Laser Writing of Flexible Photodetectors for Wearable Optoelectronics
An, J., Le, T. D., Lim, C. H. J., Tran, V., Zhan, Z., Gao, Y., Zheng, L., Sun, G., & Kim, Y. (2018) · Advanced Science · doi:10.1002/advs.201800496 · Cited by 137
Self-citationAi, Y., Hsu, T. H., Wu, D. C., Lee, L., Chen, J.-H., Chen, Y., Wu, S., Wu, C., Wang, Z. M., & Chueh, Y. (2018) · Journal of Materials Chemistry C · doi:10.1039/c8tc01153b · Cited by 106
Full graphitization of amorphous carbon by microwave heating
Kim, T., Lee, J., & Lee, K. (2016) · RSC Advances · doi:10.1039/c6ra01989g · Cited by 105
Barreiro, A., Börrnert, F., Avdoshenko, S. M., et al. (2013) · Scientific Reports · doi:10.1038/srep01115 · Cited by 96
Park, S., Lee, H., Kim, Y., & Lee, P. S. (2018) · NPG Asia Materials · doi:10.1038/s41427-018-0080-z · Cited by 84
Self-citationPerovskite Methylammonium Lead Trihalide Heterostructures: Progress and Challenges
Al-Amri, A. M., Cheng, B., & He, J. (2018) · IEEE Transactions on Nanotechnology · doi:10.1109/tnano.2018.2872887 · Cited by 79
Green Materials for Electronics
Irimia‐Vladu, M., Głowacki, E. D., Sariçiftçi, N. S., et al. (2017) · Wiley eBooks · doi:10.1002/9783527692958 · Cited by 78
Pyrolysis of cellulose and lignin
Haensel, T., Comouth, A., Lorenz, P., Ahmed, S. I. ‐., Krischok, S., Zydziak, N., Kauffmann, A., & Schaefer, J. A. (2009) · Applied Surface Science · doi:10.1016/j.apsusc.2009.05.047 · Cited by 66
The Controlled Carbonization and Archaeological Analysis of SE U. S. Wood Charcoals
Rossen, J., & Olson, J. (1985) · Journal of Field Archaeology · doi:10.1179/009346985791169797 · Cited by 45
Chen, C., Chen, G., Yang, H., Zhang, G., Hu, D., Chen, H., & Guo, T. (2017) · Journal of Materials Chemistry C · doi:10.1039/c7tc01953j · Cited by 44
Supercapacitive performance of porous carbon materials derived from tree leaves
Ma, H., Liu, Z., Wang, X., Zhang, C., & Jiang, R. (2017) · Journal of Renewable and Sustainable Energy · doi:10.1063/1.4997019 · Cited by 30
Teng, Y., Zhou, J., Khisro, S. N., Zhou, S., & Qiu, J. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2014.02.178 · Cited by 9
Cited by
Structure–property–function relationships of natural and engineered wood
Chen, C., Kuang, Y., Zhu, S., Burgert, I., Keplinger, T., Gong, A., Li, T., Berglund, L., Eichhorn, S. J., & Hu, L. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-0195-z · Cited by 1,295
Stretchable graphene–hydrogel interfaces for wearable and implantable bioelectronics
Lu, Y., Yang, G., Wang, S., Zhang, Y., Jian, Y., He, L., Yu, T., Luo, H., Kong, D., Xianyu, Y., et al. (2023) · Nature Electronics · doi:10.1038/s41928-023-01091-y · Cited by 442
Le, T. D., Phan, H., Kwon, S., Park, S., Jung, Y., Min, J., Chun, B. J., Yoon, H., Ko, S. H., Kim, S., et al. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202205158 · Cited by 433
Self-citationHe, H., Zhang, R., Zhang, P., Wang, P., Chen, N., Qian, B., Zhang, L., Yu, J., & Dai, B. (2023) · Advanced Science · doi:10.1002/advs.202205557 · Cited by 432
Vivaldi, F. M., Dallinger, A., Bonini, A., Poma, N., Sembranti, L., Biagini, D., Salvo, P., Greco, F., & Di Francesco, F. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c05614 · Cited by 364
Metadata
- Authors
- Le, T. D., Park, S., An, J., Lee, P. S., & Kim, Y.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2019-06-11
- Volume
- 29
- Issue
- 33
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2952188696
- Cited by
- 272
- References
- 41
- FWCI
- 7.90
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.