The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Performance Enhancement of Flexible Piezoelectric Nanogenerator via Doping and Rational 3D Structure Design For Self‐Powered Mechanosensational System
Abstract
With the rapid development of the Internet of things (IoT), flexible piezoelectric nanogenerators (PENG) have attracted extensive attention for harvesting environmental mechanical energy to power electronics and nanosystems. Herein, porous piezoelectric fillers with samarium/titanium‐doped BiFeO 3 (BFO) are prepared by a freeze‐drying method, and then silicone rubber is filled into the microvoids of the piezoelectric ceramics, forming a unique structure based on silicone rubber matrix with uniformly distributed piezoelectric ceramic. When subjected to external force stimulation, compared with conventional piezocomposite films found on undoped BFO without a porous structure, the PENG possesses higher stress transfer ability and thus boosts output performance. The notable enhancement in the stress transfer ability and piezoelectric potential is proven by COMSOL simulations. The PENG can exhibit a maximum open‐circuit voltage (Voc) of 16 V and short‐circuit current (Isc) of 2.8 µA, which is 5.3 and 5.6 times higher than those of conventional piezocomposite films, respectively. The PENG can be used as a triggering signal to control the operation of fire extinguishers and household appliances. This work not only expands the application scope of lead‐free piezoelectric ceramic for energy harvesting, but also provides a novel solution for self‐powered mechanosensation and shows great potential application in IoT.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Piezoelectric Nanogenerators Based on Zinc Oxide Nanowire Arrays
Wang, Z. L., & Song, J. (2006) · Science · doi:10.1126/science.1124005 · Cited by 7,922
Self-citationNanotechnology‐Enabled Energy Harvesting for Self‐Powered Micro‐/Nanosystems
Wang, Z. L., & Wu, W. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201201656 · Cited by 1,063
Self-citationPark, K., Jeong, C. K., Ryu, J., Hwang, G., & Lee, K. J. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201300458 · Cited by 245
Cited by
Smart Textiles for Electricity Generation
Chen, G., Li, Y., Bick, M., & Chen, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00821 · Cited by 931
Piezoelectric nanogenerators for personalized healthcare
Deng, W., Zhou, Y., Libanori, A., Chen, G., Yang, W., & Chen, J. (2022) · Chemical Society Reviews · doi:10.1039/d1cs00858g · Cited by 434
Applications of nanotechnology in smart textile industry: A critical review
Shah, M. A., Pirzada, B. M., Price, G., Shibiru, A. L., & Qurashi, A. (2022) · Journal of Advanced Research · doi:10.1016/j.jare.2022.01.008 · Cited by 412
Liu, L., Guo, X., & Lee, C. (2021) · Nano Energy · doi:10.1016/j.nanoen.2021.106304 · Cited by 402
Cao, X., Xiong, Y., Sun, J., Zhu, X., Sun, Q., & Wang, Z. L. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202102983 · Cited by 360
Self-citation
Metadata
- Authors
- Zhang, Y., Wu, M., Zhu, Q., Wang, F., Su, H., Li, H., Diao, C., Zheng, H., Wu, Y., & Wang, Z. L.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2019-08-12
- Volume
- 29
- Issue
- 42
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2968876476
- Cited by
- 196
- References
- 3
- FWCI
- 8.38
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.