The DOI matches its Crossref record; 49 of the 49 references it cites were found in a registry or an index.
Porosity‐ and Graphitization‐Controlled Fabrication of Nanoporous Silicon@Carbon for Lithium Storage and Its Conjugation with MXene for Lithium‐Metal Anode
Abstract
Silicon (Si) and lithium metal are the most favorable anodes for high‐energy‐density lithium‐based batteries. However, large volume expansion and low electrical conductivity restrict commercialization of Si anodes, while dendrite formation prohibits the applications of lithium‐metal anodes. Here, uniform nanoporous Si@carbon (NPSi@C) from commercial alloy and CO 2 is fabricated and tested as a stable anode for lithium‐ion batteries (LIBs). The porosity of Si as well as graphitization degree and thickness of the carbon layer can be controlled by adjusting reaction conditions. The rationally designed porosity and carbon layer of NPSi@C can improve electronic conductivity and buffer volume change of Si without destroying the carbon layer or disrupting the solid electrolyte interface layer. The optimized NPSi@C anode shows a stable cyclability with 0.00685% capacity decay per cycle at 5 A g−1 over 2000 cycles for LIBs. The energy storage mechanism is explored by quantitative kinetics analysis and proven to be a capacitance‐battery dual model. Moreover, a novel 2D/3D structure is designed by combining MXene and NPSi@C. As lithiophilic nucleation seeds, NPSi@C can induce uniform Li deposition with buffered volume expansion, which is proven by exploring Li‐metal deposition morphology on Cu foil and MXene@NPSi@C. The practical potential application of NPSi@C and MXene@NPSi@C is evaluated by full cell tests with a Li(Ni 0.8 Co 0.1 Mn 0.1)O 2 cathode.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Conductive two-dimensional titanium carbide ‘clay’ with high volumetric capacitance
Ghidiu, M., Lukatskaya, M. R., Zhao, M.-Q., Gogotsi, Y., & Barsoum, M. W. (2014) · Nature · doi:10.1038/nature13970 · Cited by 5,997
Where do batteries end and supercapacitors begin?
Simon, P., Gogotsi, Y., & Dunn, B. (2014) · Science · doi:10.1126/science.1249625 · Cited by 5,634
Pseudocapacitive oxide materials for high-rate electrochemical energy storage
Augustyn, V., Simon, P., & Dunn, B. (2014) · Energy & Environmental Science · doi:10.1039/c3ee44164d · Cited by 5,575
Electromagnetic interference shielding with 2D transition metal carbides (MXenes)
Shahzad, F., Alhabeb, M., Hatter, C. B., Anasori, B., Man Hong, S., Koo, C. M., & Gogotsi, Y. (2016) · Science · doi:10.1126/science.aag2421 · Cited by 5,201
High-rate electrochemical energy storage through Li+ intercalation pseudocapacitance
Augustyn, V., Come, J., Lowe, M. A., Kim, J. W., Taberna, P.-L., Tolbert, S. H., Abruña, H. D., Simon, P., & Dunn, B. (2013) · Nature Materials · doi:10.1038/nmat3601 · Cited by 5,177
Cation Intercalation and High Volumetric Capacitance of Two-Dimensional Titanium Carbide
Lukatskaya, M. R., Mashtalir, O., Ren, C. E., Dall’Agnese, Y., Rozier, P., Taberna, P. L., Naguib, M., Simon, P., Barsoum, M. W., & Gogotsi, Y. (2013) · Science · doi:10.1126/science.1241488 · Cited by 4,320
A pomegranate-inspired nanoscale design for large-volume-change lithium battery anodes
Liu, N., Lu, Z., Zhao, J., McDowell, M. T., Lee, H.-W., Zhao, W., & Cui, Y. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.6 · Cited by 2,491
Wu, H., Chan, G., Choi, J. W., Ryu, I., Yao, Y., McDowell, M. T., Lee, S. W., Jackson, A., Yang, Y., Hu, L., et al. (2012) · Nature Nanotechnology · doi:10.1038/nnano.2012.35 · Cited by 2,478
Selective deposition and stable encapsulation of lithium through heterogeneous seeded growth
Yan, K., Lu, Z., Lee, H.-W., Xiong, F., Hsu, P.-C., Li, Y., Zhao, J., Chu, S., & Cui, Y. (2016) · Nature Energy · doi:10.1038/nenergy.2016.10 · Cited by 2,116
A Yolk-Shell Design for Stabilized and Scalable Li-Ion Battery Alloy Anodes
Liu, N., Wu, H., McDowell, M. T., Yao, Y., Wang, C., & Cui, Y. (2012) · Nano Letters · doi:10.1021/nl3014814 · Cited by 1,842
A Major Constituent of Brown Algae for Use in High-Capacity Li-Ion Batteries
Kovalenko, I., Zdyrko, B., Magasinski, A., Hertzberg, B., Milicev, Z., Burtovyy, R., Luzinov, I., & Yushin, G. (2011) · Science · doi:10.1126/science.1209150 · Cited by 1,802
Promises and challenges of nanomaterials for lithium-based rechargeable batteries
Sun, Y., Liu, N., & Cui, Y. (2016) · Nature Energy · doi:10.1038/nenergy.2016.71 · Cited by 1,703
Commercialization of Lithium Battery Technologies for Electric Vehicles
Zeng, X., Li, M., Abd El‐Hady, D., Alshitari, W., Al‐Bogami, A. S., Lu, J., & Amine, K. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900161 · Cited by 1,542
Wu, H., Yu, G., Pan, L., Liu, N., McDowell, M. T., Bao, Z., & Cui, Y. (2013) · Nature Communications · doi:10.1038/ncomms2941 · Cited by 1,378
Thickness-independent capacitance of vertically aligned liquid-crystalline MXenes
Xia, Y., Mathis, T. S., Zhao, M.-Q., Anasori, B., Dang, A., Zhou, Z., Cho, H., Gogotsi, Y., & Yang, S. (2018) · Nature · doi:10.1038/s41586-018-0109-z · Cited by 1,310
A materials perspective on Li-ion batteries at extreme temperatures
Rodrigues, M.-T. F., Babu, G., Gullapalli, H., Kalaga, K., Sayed, F. N., Kato, K., Joyner, J., & Ajayan, P. M. (2017) · Nature Energy · doi:10.1038/nenergy.2017.108 · Cited by 913
Recent Advances in Energy Chemistry between Solid-State Electrolyte and Safe Lithium-Metal Anodes
Cheng, X.-B., Zhao, C.-Z., Yao, Y.-X., Liu, H., & Zhang, Q. (2019) · Chem · doi:10.1016/j.chempr.2018.12.002 · Cited by 874
Growth of conformal graphene cages on micrometre-sized silicon particles as stable battery anodes
Li, Y., Yan, K., Lee, H.-W., Lu, Z., Liu, N., & Cui, Y. (2016) · Nature Energy · doi:10.1038/nenergy.2015.29 · Cited by 857
Aqueous Li-ion battery enabled by halogen conversion–intercalation chemistry in graphite
Yang, C., Chen, J., Ji, X., Pollard, T. P., Lü, X., Sun, C.-J., Hou, S., Liu, Q., Liu, C., Qing, T., et al. (2019) · Nature · doi:10.1038/s41586-019-1175-6 · Cited by 806
Gao, Y., Yan, Z., Gray, J. L., He, X., Wang, D., Chen, T., Huang, Q., Li, Y. C., Wang, H., Kim, S. H., et al. (2019) · Nature Materials · doi:10.1038/s41563-019-0305-8 · Cited by 790
Scalable synthesis of silicon-nanolayer-embedded graphite for high-energy lithium-ion batteries
Ko, M., Chae, S., Ma, J., Kim, N., Lee, H.-W., Cui, Y., & Cho, J. (2016) · Nature Energy · doi:10.1038/nenergy.2016.113 · Cited by 771
Xu, Q., Li, J., Sun, J., Yin, Y., Wan, L., & Guo, Y. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601481 · Cited by 652
Chen, X., Chen, X.-R., Hou, T.-Z., Li, B.-Q., Cheng, X.-B., Zhang, R., & Zhang, Q. (2019) · Science Advances · doi:10.1126/sciadv.aau7728 · Cited by 610
Zhou, L., Zhang, K., Hu, Z., Tao, Z., Mai, L., Kang, Y., Chou, S., & Chen, J. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701415 · Cited by 593
Tian, Y., An, Y., Wei, C., Xi, B., Xiong, S., Feng, J., & Qian, Y. (2019) · ACS Nano · doi:10.1021/acsnano.9b05599 · Cited by 547
Self-citationWang, J., Huang, W., Pei, A., Li, Y., Shi, F., Yu, X., & Cui, Y. (2019) · Nature Energy · doi:10.1038/s41560-019-0413-3 · Cited by 528
Zhang, Y.-C., You, Y., Xin, S., Yin, Y.-X., Zhang, J., Wang, P., Zheng, X.-S., Cao, F.-F., & Guo, Y.-G. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.04.043 · Cited by 525
High areal capacity battery electrodes enabled by segregated nanotube networks
Park, S.-H., King, P. J., Tian, R., Boland, C. S., Coelho, J., Zhang, C., McBean, P., McEvoy, N., Kremer, M. P., Daly, D., et al. (2019) · Nature Energy · doi:10.1038/s41560-019-0398-y · Cited by 477
Chen, S., Shen, L., van Aken, P. A., Maier, J., & Yu, Y. (2017) · Advanced Materials · doi:10.1002/adma.201605650 · Cited by 475
Yi, R., Dai, F., Gordin, M. L., Chen, S., & Wang, D. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200857 · Cited by 473
Uniform High Ionic Conducting Lithium Sulfide Protection Layer for Stable Lithium Metal Anode
Chen, H., Pei, A., Lin, D., Xie, J., Yang, A., Xu, J., Lin, K., Wang, J., Wang, H., Shi, F., et al. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900858 · Cited by 472
Li, G., Liu, Z., Huang, Q., Gao, Y., Regula, M., Wang, D., Chen, L.-Q., & Wang, D. (2018) · Nature Energy · doi:10.1038/s41560-018-0276-z · Cited by 444
Zhang, L., Wang, C., Dou, Y., Cheng, N., Cui, D., Du, Y., Liu, P., Al‐Mamun, M., Zhang, S., & Zhao, H. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201903709 · Cited by 376
Flexible and Freestanding Silicon/MXene Composite Papers for High-Performance Lithium-Ion Batteries
Tian, Y., An, Y., & Feng, J. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b21893 · Cited by 330
Self-citationLiu, Y., Tai, Z., Zhou, T., Sencadas, V., Zhang, J., Zhang, L., Konstantinov, K., Guo, Z., & Liu, H. K. (2017) · Advanced Materials · doi:10.1002/adma.201703028 · Cited by 315
Rehman, S., Guo, S., & Hou, Y. (2016) · Advanced Materials · doi:10.1002/adma.201506111 · Cited by 311
Ionogel Electrolytes for High‐Performance Lithium Batteries: A Review
Chen, N., Zhang, H., Li, L., Chen, R., & Guo, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702675 · Cited by 304
3D TiC/C Core/Shell Nanowire Skeleton for Dendrite‐Free and Long‐Life Lithium Metal Anode
Liu, S., Xia, X., Zhong, Y., Deng, S., Yao, Z., Zhang, L., Cheng, X., Wang, X., Zhang, Q., & Tu, J. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702322 · Cited by 292
Vacuum distillation derived 3D porous current collector for stable lithium–metal batteries
An, Y., Fei, H., Zeng, G., Xu, X., Ci, L., Xi, B., Xiong, S., Feng, J., & Qian, Y. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.03.036 · Cited by 258
Self-citationLiu, N., Liu, J., Jia, D., Huang, Y., Luo, J., Mamat, X., Yu, Y., Dong, Y., & Hu, G. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2018.09.019 · Cited by 257
Dimensionally Designed Carbon–Silicon Hybrids for Lithium Storage
Zhang, X., Kong, D., Li, X., & Zhi, L. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201806061 · Cited by 208
Zhang, Y., Mu, Z., Lai, J., Chao, Y., Yang, Y., Zhou, P., Li, Y., Yang, W., Xia, Z., & Guo, S. (2019) · ACS Nano · doi:10.1021/acsnano.8b08821 · Cited by 200
Chen, X., Li, H., Shen, X., & Zhang, Q. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201809203 · Cited by 195
Liu, S., Xia, X., Deng, S., Xie, D., Yao, Z., Zhang, L., Zhang, S., Wang, X., & Tu, J. (2019) · Advanced Materials · doi:10.1002/adma.201806470 · Cited by 177
Yi, R., Zai, J., Dai, F., Gordin, M. L., & Wang, D. (2014) · Nano Energy · doi:10.1016/j.nanoen.2014.04.006 · Cited by 165
Wang, B., Ryu, J., Choi, S., Zhang, X., Pribat, D., Li, X., Zhi, L., Park, S., & Ruoff, R. (2019) · ACS Nano · doi:10.1021/acsnano.8b09034 · Cited by 161
Unique 3D nanoporous/macroporous structure Cu current collector for dendrite-free lithium deposition
Liu, H., Wang, E., Zhang, Q., Ren, Y., Guo, X., Wang, L., Li, G., & Yu, H. (2018) · Energy storage materials · doi:10.1016/j.ensm.2018.07.010 · Cited by 146
Han, Y., Zou, J., Li, Z., Wang, W., Jie, Y., Ma, J., Tang, B. H., Zhang, Q., Cao, X., Xu, S., et al. (2018) · ACS Nano · doi:10.1021/acsnano.8b01558 · Cited by 139
Lin, Z., Guo, X., & Yu, H. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.10.021 · Cited by 116
Cited by
Heteroatom-doped carbon-based materials for lithium and sodium ion batteries
Yuan, Y., Chen, Z., Yu, H., Zhang, X., Liu, T., Xia, M., Zheng, R., Shui, M., & Shu, J. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.07.027 · Cited by 455
Zhang, K., Huang, Z., Yang, M., Liu, M., Zhou, Y., Zhan, J., & Zhou, Y. (2023) · SusMat · doi:10.1002/sus2.157 · Cited by 52
Metadata
- Authors
- An, Y., Tian, Y., Wei, H., Xi, B., Xiong, S., Feng, J., & Qian, Y.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2019-12-20
- Volume
- 30
- Issue
- 9
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2996158674
- Cited by
- 269
- References
- 49
- FWCI
- 13.66
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.