The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
How Much Oxygen Can a MXene Surface Take Before It Breaks?
Open accessAbstract
Tuning and tailoring of surface terminating functional species hold the key to unlock unprecedented properties for a wide range of applications of the largest 2D family known as MXenes. However, a few routes for surface tailoring are explored and little is known about the extent to which the terminating species can saturate the MXene surfaces. Among available terminations, atomic oxygen is of interest for electrochemical energy storage, hydrogen evolution reaction, photocatalysis, etc. However, controlled oxidation of the surfaces is not trivial due to the favored formation of oxides. In the present contribution, single sheets of Ti 3 C 2 Tx MXene, inherently terminated by F and O, are defluorinated by heating in vacuum and subsequentially exposed to O 2 gas at temperatures up to 450 °C in situ, in an environmental transmission electron microscope. Results include exclusive termination by O on the MXene surfaces and eventual supersaturation (x > 2) with a retained MXene sheet structure. Upon extended O exposure, the MXene structure transforms into TiO 2 and desorbs surface bound H 2 O and CO 2 reaction products. These results are fundamental for understanding the oxidation, the presence of water on MXene surfaces, and the degradation of MXenes, and pave way for further tailoring of MXene surfaces.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
2D MXenes: A New Family of Promising Catalysts for the Hydrogen Evolution Reaction
Gao, G., O’Mullane, A. P., & Du, A. (2017) · ACS Catalysis · doi:10.1021/acscatal.6b02754 · Cited by 1,153
Oxygen‐Functionalized Ultrathin Ti 3 C 2 T x MXene for Enhanced Electrocatalytic Hydrogen Evolution
Jiang, Y., Sun, T., Xie, X., Jiang, W., Li, J., Tian, B., & Su, C. (2019) · ChemSusChem · doi:10.1002/cssc.201803032 · Cited by 367
Cited by
The world of two-dimensional carbides and nitrides (MXenes)
VahidMohammadi, A., Rosen, J., & Gogotsi, Y. (2021) · Science · doi:10.1126/science.abf1581 · Cited by 3,191
Self-citationTi3C2TX MXene for Sensing Applications: Recent Progress, Design Principles, and Future Perspectives
Pei, Y., Zhang, X., Hui, Z., Zhou, J., Huang, X., Sun, G., & Huang, W. (2021) · ACS Nano · doi:10.1021/acsnano.1c00248 · Cited by 799
Recent Advances in Oxidation Stable Chemistry of 2D MXenes
Cao, F., Zhang, Y., Wang, H., Khan, K., Tareen, A. K., Qian, W., Zhang, H., & Ågren, H. (2022) · Advanced Materials · doi:10.1002/adma.202107554 · Cited by 648
Baig, N. (2023) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2022.107362 · Cited by 450
Li, M., Li, X., Qin, G., Luo, K., Lu, J., Li, Y., Liang, G., Huang, Z., Zhou, J., Hultman, L., et al. (2021) · ACS Nano · doi:10.1021/acsnano.0c07972 · Cited by 414
Self-citation
Metadata
- Authors
- Persson, I., Halim, J., Hansen, T. W., Wagner, J. B., Darakchieva, V., Palisaitis, J., Rosen, J., & Persson, P. O. Å.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2020-02-18
- Volume
- 30
- Issue
- 47
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W3008722960
- Cited by
- 202
- References
- 2
- FWCI
- 9.98
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.