The DOI matches its Crossref record; 53 of the 53 references it cites were found in a registry or an index.
Fabrication, Applications, and Prospects of Aramid Nanofiber
Abstract
Aramid nanofibers (ANFs) are of great interest in various applications due to its 1D nanoscale, high aspect ratio, high specific surface area, excellent strength, and modulus as well as impressive chemical and thermal stabilities. It is considered as one of the most promising nano‐sized building blocks with excellent properties and has therefore drawn increasing attention since 2011. However, no review has summarized the research progress and the prospective challenges of ANF. Herein, the methods of ANF fabrication and their relative merits are comprehensively discussed together with the challenges and progress in the deprotonation method for preparing ANF. The fabrication methods and development of ANF‐based advanced materials with different macroscopic morphologies, including the 1D ANF aerogel fiber, 2D ANF film/nanopaper/coating, and 3D ANF gel and particle are also described. Furthermore, the applications of ANF in nanocomposite reinforcement, battery separators, electrical insulation nanopaper, flexible electronics, and adsorption and filtration media are presented. Additionally, the possible challenges and outlooks toward the future development of ANF are highlighted. This review indicates that the ANF and ANF‐based materials mentioned herein will boost the development of next‐generation advanced functional materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review on polymer nanofibers by electrospinning and their applications in nanocomposites
Huang, Z.-M., Zhang, Y.-Z., Kotaki, M., & Ramakrishna, S. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00178-7 · Cited by 7,556
Electrospinning: A fascinating fiber fabrication technique
Bhardwaj, N., & Kundu, S. C. (2010) · Biotechnology Advances · doi:10.1016/j.biotechadv.2010.01.004 · Cited by 5,028
Electrospinning: A Fascinating Method for the Preparation of Ultrathin Fibers
Greiner, A., & Wendorff, J. H. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200604646 · Cited by 4,241
The effect of processing variables on the morphology of electrospun nanofibers and textiles
Deitzel, J. M., Kleinmeyer, J., Harris, D., & Beck Tan, N. C. (2001) · Polymer · doi:10.1016/s0032-3861(00)00250-0 · Cited by 2,915
Microfibrillated cellulose and new nanocomposite materials: a review
Siró, I., & Plackett, D. (2010) · Cellulose · doi:10.1007/s10570-010-9405-y · Cited by 2,883
Cellulose nanofibers prepared by TEMPO-mediated oxidation of native cellulose
Saito, T., Kimura, S., Nishiyama, Y., & Isogai, A. (2007) · Biomacromolecules · doi:10.1021/bm0703970 · Cited by 2,493
Electrospinning of Polymeric Nanofibers for Tissue Engineering Applications: A Review
Pham, Q. P., Sharma, U., & Mikos, A. G. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.1197 · Cited by 2,256
Saito, T., Nishiyama, Y., Putaux, J.-L., Vignon, M., & Isogai, A. (2006) · Biomacromolecules · doi:10.1021/bm060154s · Cited by 1,796
Electrospun nanofibers: solving global issues
Ramakrishna, S., Fujihara, K., Teo, W.-E., Yong, T., Ma, Z., & Ramaseshan, R. (2006) · Materials Today · doi:10.1016/s1369-7021(06)71389-x · Cited by 1,418
Pimenta, S., & Pinho, S. T. (2011) · Waste Management · doi:10.1016/j.wasman.2010.09.019 · Cited by 967
Cited by
Wang, L., Zhang, M., Yang, B., Tan, J., & Ding, X. (2020) · ACS Nano · doi:10.1021/acsnano.0c04888 · Cited by 409
Self-citationElectrospun Polymer Nanofibers: Processing, Properties, and Applications
Al-Abduljabbar, A., & Farooq, I. (2022) · Polymers · doi:10.3390/polym15010065 · Cited by 397
Lu, Z., Jia, F., Zhuo, L., Ning, D., Gao, K., & Xie, F. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.108853 · Cited by 255
Self-citation
Metadata
- Authors
- Yang, B., Wang, L., Zhang, M., Luo, J., Lu, Z., & Ding, X.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2020-03-20
- Volume
- 30
- Issue
- 22
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W3011034750
- Cited by
- 484
- References
- 53
- FWCI
- 19.86
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.