The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
In Situ Formation of Multiple Schottky Barriers in a Ti3C2 MXene Film and its Application in Highly Sensitive Gas Sensors
Abstract
The main gas‐sensing mechanisms of 2D materials are surface charge transfer by analytes and Schottky barrier (SB) modulation at the interface between the metallic and semiconducting surfaces. In particular, dramatic differences in the gas‐sensing performances of 2D materials originate from SB modulation. However, SB sites typically exist only at the interface between the semiconducting channel material and the metal electrode. Herein, in situ formed multiple SBs in a single gas‐sensing channel are demonstrated, which are derived from the heterojunction of metallic Ti 3 C 2 and semiconducting TiO 2. In stark contrast with previous techniques, edge‐oxidized Ti 3 C 2 flakes are synthesized by solution oxidation, allowing the uniform formation of TiO 2 crystals on all flakes that comprise the gas sensing channel. Oxidized colloidal solutions are subjected to vacuum filtration to automatically form SB sites at the multiple inter‐flake junctions in both the outer surface and inner bulk regions of the film. The TiO 2/Ti 3 C 2 composite sensor shows 13.7 times higher NO 2 sensitivity as compared with pristine Ti 3 C 2 MXene, while the responses of the reducing gases are almost unchanged. The results suggest a new strategy for improving gas‐sensing performance by maximizing the density of SB sites through a simple method.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
2D metal carbides and nitrides (MXenes) for energy storage
Anasori, B., Lukatskaya, M. R., & Gogotsi, Y. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.98 · Cited by 7,440
The reduction of graphene oxide
Pei, S., & Cheng, H.-M. (2012) · Carbon · doi:10.1016/j.carbon.2011.11.010 · Cited by 5,164
Recent Advances in Ultrathin Two-Dimensional Nanomaterials
Tan, C., Cao, X., Wu, X.-J., He, Q., Yang, J., Zhang, X., Chen, J., Zhao, W., Han, S., Nam, G.-H., et al. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00558 · Cited by 5,100
Guidelines for Synthesis and Processing of Two-Dimensional Titanium Carbide (Ti3C2Tx MXene)
Alhabeb, M., Maleski, K., Anasori, B., Lelyukh, P., Clark, L., Sin, S., & Gogotsi, Y. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b02847 · Cited by 5,045
Oxidation Stability of Colloidal Two-Dimensional Titanium Carbides (MXenes)
Zhang, C. J., Pinilla, S., McEvoy, N., Cullen, C. P., Anasori, B., Long, E., Park, S.-H., Seral-Ascaso, A., Shmeliov, A., Krishnan, D., et al. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00745 · Cited by 1,725
Metallic Ti3C2T x MXene Gas Sensors with Ultrahigh Signal-to-Noise Ratio
Kim, S. J., Koh, H.-J., Ren, C. E., Kwon, O., Maleski, K., Cho, S.-Y., Anasori, B., Kim, C.-K., Choi, Y.-K., Kim, J., et al. (2018) · ACS Nano · doi:10.1021/acsnano.7b07460 · Cited by 1,699
Self-citationSchottky Barrier Heights and the Continuum of Gap States
Tersoff, J. (1984) · Physical Review Letters · doi:10.1103/physrevlett.52.465 · Cited by 1,403
Sensing Behavior of Atomically Thin-Layered MoS2 Transistors
Late, D. J., Huang, Y.-K., Liu, B., Acharya, J., Shirodkar, S. N., Luo, J., Yan, A., Charles, D., Waghmare, U. V., Dravid, V. P., et al. (2013) · ACS Nano · doi:10.1021/nn400026u · Cited by 1,374
Yang, S., Jiang, C., & Wei, S.-H. (2017) · Applied Physics Reviews · doi:10.1063/1.4983310 · Cited by 876
Peng, C., Yang, X., Li, Y., Yu, H., Wang, H., & Peng, F. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b11973 · Cited by 847
Cited by
Zhang, D., Yu, S., Wang, X., Huang, J., Pan, W., Zhang, J., Meteku, B. E., & Zeng, J. (2022) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2021.127160 · Cited by 424
MXene as emerging nanofillers for high-performance polymer composites: A review
Gong, K., Zhou, K., Qian, X., Shi, C., & Yu, B. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.108867 · Cited by 362
Zhou, T., & Zhang, T. (2021) · Small Methods · doi:10.1002/smtd.202100515 · Cited by 350
Etching Mechanism of Monoatomic Aluminum Layers during MXene Synthesis
Kim, Y.-J., Kim, S. J., Seo, D., Chae, Y., Anayee, M., Lee, Y., Gogotsi, Y., Ahn, C. W., & Jung, H.-T. (2021) · Chemistry of Materials · doi:10.1021/acs.chemmater.1c01263 · Cited by 299
Self-citationMetal oxide semiconductors for gas sensing
Goel, N., Kunal, K., Kushwaha, A., & Kumar, M. (2023) · Engineering Reports · doi:10.1002/eng2.12604 · Cited by 294
Wang, X., Zhang, D., Zhang, H., Gong, L., Yang, Y., Zhao, W., Yu, S., Yin, Y., & Sun, D. (2021) · Nano Energy · doi:10.1016/j.nanoen.2021.106242 · Cited by 268
Metadata
- Authors
- Choi, J., Kim, Y., Cho, S., Park, K., Kang, H., Kim, S. J., & Jung, H.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2020-08-09
- Volume
- 30
- Issue
- 40
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W3047625527
- Cited by
- 310
- References
- 36
- FWCI
- 14.01
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.