The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Heterometallic Seed‐Mediated Zinc Deposition on Inkjet Printed Silver Nanoparticles Toward Foldable and Heat‐Resistant Zinc Batteries
Abstract
To achieve high performed zinc metal batteries, it is imperative to address the issues of dendrite growth and the side‐reactions occurring at the Zn anode, particularly when the batteries are operated at high current densities and high temperature. Herein, a flexible and dendrite‐free Zn metal anode (AgNPs@CC/Zn), which is prepared by inkjet printing silver nanoparticles on a 3D carbon matrix, is reported. Experimental observations and DFT calculation reveal that the Ag nanoparticles can work as heterometallic seeds for zinc deposition, and thus simultaneously improve the zincophilicity and thermal conductivity of the carbon matrix. This not only lowers the Zn nucleation overpotential and guides the uniform Zn nucleation but also promotes the reversible zinc stripping/plating via AgZn alloying/de‐alloying reactions. As a result, the AgNPs@CC/Zn anode presents low voltage hysteresis of 80 mV and superior cycling over 480 h at a high current density of 10 mA cm−2. The AgNPs@CC/Zn anode can enable full cells with exceptional cyclic stability and enhanced high‐temperature endurance. Furthermore, the foldable pouch cell using the AgNPs@CC/Zn anode exhibits high capacity retention regardless of different deformation status. This work demonstrates the promising potential of inkjet printing technology in developing 3D dendrite‐free zinc anode for foldable and heat‐resistant zinc batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review on inkjet printing of nanoparticle inks for flexible electronics
Nayak, L., Mohanty, S., Nayak, S. K., & Ramadoss, A. (2019) · Journal of Materials Chemistry C · doi:10.1039/c9tc01630a · Cited by 497
Cited by
Zinc Anode for Mild Aqueous Zinc-Ion Batteries: Challenges, Strategies, and Perspectives
Yang, J., Yin, B., Sun, Y., Pan, H., Sun, W., Jia, B., Zhang, S., & Ma, T. (2022) · Nano-Micro Letters · doi:10.1007/s40820-021-00782-5 · Cited by 584
Recent Progress on Zn Anodes for Advanced Aqueous Zinc‐Ion Batteries
Nie, C., Wang, G., Wang, D., Wang, M., Gao, X., Bai, Z., Wang, N., Yang, J., Xing, Z., & Dou, S. (2023) · Advanced Energy Materials · doi:10.1002/aenm.202300606 · Cited by 561
Zhao, R., Dong, X., Liang, P., Li, H., Zhang, T., Zhou, W., Wang, B., Yang, Z., Wang, X., Wang, L., et al. (2023) · Advanced Materials · doi:10.1002/adma.202209288 · Cited by 343
A Review on 3D Zinc Anodes for Zinc Ion Batteries
Guo, N., Huo, W., Dong, X., Sun, Z., Lu, Y., Wu, X., Dai, L., Wang, L., Lin, H., Liu, H., et al. (2022) · Small Methods · doi:10.1002/smtd.202200597 · Cited by 318
Nitrogen‐Doped Carbon Fibers Embedded with Zincophilic Cu Nanoboxes for Stable Zn‐Metal Anodes
Zeng, Y., Sun, P. X., Pei, Z., Jin, Q., Zhang, X., Yu, L., & Lou, X. W. (. (2022) · Advanced Materials · doi:10.1002/adma.202200342 · Cited by 286
Metadata
- Authors
- Chen, T., Wang, Y., Yang, Y., Huang, F., Zhu, M., Ang, B. T. W., & Xue, J. M.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2021-04-08
- Volume
- 31
- Issue
- 24
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W3153047971
- Cited by
- 205
- References
- 1
- FWCI
- 11.38
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Heterometallic Seed‐Mediated Zinc Deposition on Inkjet Printed Silver Nanoparticles Toward Foldable and Heat‐Resistant Zinc Batteries. https://app.cochat.ai/papers/10.1002/adfm.202101607
- The paper
- Chen, T., Wang, Y., Yang, Y., Huang, F., Zhu, M., Ang, B. T. W., & Xue, J. M. (2021). Heterometallic Seed‐Mediated Zinc Deposition on Inkjet Printed Silver Nanoparticles Toward Foldable and Heat‐Resistant Zinc Batteries. Advanced Functional Materials. https://doi.org/10.1002/adfm.202101607
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.