The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Surface Modification Engineering Enabling 4.6 V Single‐Crystalline Ni‐Rich Cathode with Superior Long‐Term Cyclability
Abstract
Aiming for increased nickel and lower cobalt content in layered transition metal oxide cathodes (NCM) is a feasible strategy for achieving increased energy density and cost competitiveness in commercial lithium‐ion batteries. However, the practical long‐term cycling of NCM cathodes suffers from severe capacity degradation due to irreversible interface phase transformation and unavoidable crack formation. Herein, an in situ modification strategy is used to form a uniform and conformal Li 1.8 Sc 0.8 Ti 1.2(PO 4)3 (LSTP) protective layer by interconnecting the single‐crystal‐layered LiNi 0.6 Co 0.1 Mn 0.3 O 2 (SC‐NCM) particles. LSTP surface modification helps to construct a robust cathode‐electrolyte interphase thin film between the cathode and the electrolyte, which can prevent SC‐NCM corrosion by electrolyte, and the stability of the mechanics can improve the intergranular cracks caused by long cycles under harsh conditions. Moreover, the LSTP conductive modification layer facilitates the lithium‐ion transport among cathode particles, effectively enhancing the rate capability. Impressively, the LSTP modified SC‐NCM exhibits a high reversible capacity of 144.3 mAh g−1 at the high discharge rate of 5 C and maintains a capacity retention of 90.27% even at the ultrahigh charge voltage of 4.6 V operation after 500 cycles. Moreover, in a pouch‐type full battery, the graphite/LSTP modified SC‐NCM maintains a capacity retention of 89.6% after 1700 cycles.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electric Vehicles Batteries: Requirements and Challenges
Deng, J., Bae, C., Denlinger, A., & Miller, T. (2020) · Joule · doi:10.1016/j.joule.2020.01.013 · Cited by 761
Reducing cobalt from lithium-ion batteries for the electric vehicle era
Ryu, H.-H., Sun, H. H., Myung, S.-T., Yoon, C. S., & Sun, Y.-K. (2021) · Energy & Environmental Science · doi:10.1039/d0ee03581e · Cited by 331
Cited by
Fundamentals, status and challenges of direct recycling technologies for lithium ion batteries
Ji, H., Wang, J., Ma, J., Cheng, H.-M., & Zhou, G. (2023) · Chemical Society Reviews · doi:10.1039/d3cs00254c · Cited by 385
Research on the removal of heavy metal ions in water by magnetically modified zeolite
Liu, J., Yuan, Z., Yuan, M., Yan, G., & Xie, T. (2022) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-022-09114-8 · Cited by 4
Metadata
- Authors
- Fan, X., Huang, Y., Wei, H., Tang, L., He, Z., Yan, C., Mao, J., Dai, K., & Zheng, J.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2021-10-27
- Volume
- 32
- Issue
- 6
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W3209257858
- Cited by
- 198
- References
- 2
- FWCI
- 10.15
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Surface Modification Engineering Enabling 4.6 V Single‐Crystalline Ni‐Rich Cathode with Superior Long‐Term Cyclability. https://app.cochat.ai/papers/10.1002/adfm.202109421
- The paper
- Fan, X., Huang, Y., Wei, H., Tang, L., He, Z., Yan, C., Mao, J., Dai, K., & Zheng, J. (2022). Surface Modification Engineering Enabling 4.6 V Single‐Crystalline Ni‐Rich Cathode with Superior Long‐Term Cyclability. Advanced Functional Materials. https://doi.org/10.1002/adfm.202109421
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.