Stable High‐Efficiency CsPbI2Br Solar Cells by Designed Passivation Using Multifunctional 2D Perovskite
The DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.
Abstract
CsPbI 2 Br perovskite is known for its advantages over its organic‐inorganic hybrid counterpart including better thermal stability and appropriate bandgap for the front sub‐cell of tandem solar cell. However, its lower‐than‐satisfactory efficiency, problematic phase stability and sensitivity to moisture hinder its further advancement. Here, three kinds of glycine halides (Gly‐X: X = Cl, Br, and I) are strategically deigned to improve the performance of CsPbI 2 Br perovskite solar cells (PSCs). Systematic experimental and calculated results prove that a 2D/3D hybrid structure is formed, wherein the Gly‐X‐based 2D perovskite is mainly located at the CsPbI 2 Br grain boundaries, and the A‐sites of the 2D perovskite form strong bonds with the 3D perovskite to suppress ion migration by increasing its activation energy. As a result, a power conversion efficiency (PCE) of 17.26% was obtained with an open‐circuit voltage (VOC) of 1.33 V, which is among the best PCE values for the CsPbI 2 Br PSCs. In addition, the efficiency of encapsulated device decrease only by 14.1% after 340 h continuous illumination in ambient conditions, representing one of the most‐stable inorganic PSCs reported so far. This work provides important insights into designing passivating agents to address the issue of phase segregation for the development of highly stable perovskite optoelectronic devices.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes
Min, H., Lee, D. Y., Kim, J., Kim, G., Lee, K. S., Kim, J., Paik, M. J., Kim, Y. K., Kim, K. S., Kim, M. G., et al. (2021) · Nature · doi:10.1038/s41586-021-03964-8 · Cited by 3,174
Ionic transport in hybrid lead iodide perovskite solar cells
Eames, C., Frost, J. M., Barnes, P. R. F., O’Regan, B. C., Walsh, A., & Islam, M. S. (2015) · Nature Communications · doi:10.1038/ncomms8497 · Cited by 2,889
One-Year stable perovskite solar cells by 2D/3D interface engineering
Grancini, G., Roldán-Carmona, C., Zimmermann, I., Mosconi, E., Lee, X., Martineau, D., Narbey, S., Oswald, F., De Angelis, F., Graetzel, M., et al. (2017) · Nature Communications · doi:10.1038/ncomms15684 · Cited by 2,068
Bandgap‐Tunable Cesium Lead Halide Perovskites with High Thermal Stability for Efficient Solar Cells
Sutton, R. J., Eperon, G. E., Miranda, L., Parrott, E. S., Kamino, B. A., Patel, J. B., Hörantner, M. T., Johnston, M. B., Haghighirad, A. A., Moore, D. T., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502458 · Cited by 1,571
Constructive molecular configurations for surface-defect passivation of perovskite photovoltaics
Wang, R., Xue, J., Wang, K.-L., Wang, Z.-K., Luo, Y., Fenning, D., Xu, G., Nuryyeva, S., Huang, T., Zhao, Y., et al. (2019) · Science · doi:10.1126/science.aay9698 · Cited by 1,339
Li, X., Ibrahim Dar, M., Yi, C., Luo, J., Tschumi, M., Zakeeruddin, S. M., Nazeeruddin, M. K., Han, H., & Grätzel, M. (2015) · Nature Chemistry · doi:10.1038/nchem.2324 · Cited by 1,183
Bright triplet excitons in caesium lead halide perovskites
Becker, M. A., Vaxenburg, R., Nedelcu, G., Sercel, P. C., Shabaev, A., Mehl, M. J., Michopoulos, J. G., Lambrakos, S. G., Bernstein, N., Lyons, J. L., et al. (2018) · Nature · doi:10.1038/nature25147 · Cited by 1,031
In Situ Growth of 2D Perovskite Capping Layer for Stable and Efficient Perovskite Solar Cells
Chen, P., Bai, Y., Wang, S., Lyu, M., Yun, J., & Wang, L. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201706923 · Cited by 776
Wang, J., Zhang, J., Zhou, Y., Liu, H., Xue, Q., Li, X., Chueh, C.-C., Yip, H.-L., Zhu, Z., & Jen, A. K. Y. (2020) · Nature Communications · doi:10.1038/s41467-019-13909-5 · Cited by 662
Multifunctional Enhancement for Highly Stable and Efficient Perovskite Solar Cells
Cai, Y., Cui, J., Chen, M., Zhang, M., Han, Y., Qian, F., Zhao, H., Yang, S., Yang, Z., Bian, H., et al. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202005776 · Cited by 417
Self-citationInterface Engineering for All‐Inorganic CsPbI2Br Perovskite Solar Cells with Efficiency over 14%
Yan, L., Xue, Q., Liu, M., Zhu, Z., Tian, J., Li, Z., Chen, Z., Chen, Z., Yan, H., Yip, H., et al. (2018) · Advanced Materials · doi:10.1002/adma.201802509 · Cited by 404
Interstitial Occupancy by Extrinsic Alkali Cations in Perovskites and Its Impact on Ion Migration
Cao, J., Tao, S. X., Bobbert, P. A., Wong, C., & Zhao, N. (2018) · Advanced Materials · doi:10.1002/adma.201707350 · Cited by 368
Controlled n‐Doping in Air‐Stable CsPbI2Br Perovskite Solar Cells with a Record Efficiency of 16.79%
Han, Y., Zhao, H., Duan, C., Yang, S., Yang, Z., Liu, Z., & Liu, S. (. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909972 · Cited by 367
Self-citationPhase Pure 2D Perovskite for High‐Performance 2D–3D Heterostructured Perovskite Solar Cells
Li, P., Zhang, Y., Liang, C., Xing, G., Liu, X., Li, F., Liu, X., Hu, X., Shao, G., & Song, Y. (2018) · Advanced Materials · doi:10.1002/adma.201805323 · Cited by 339
Deng, Y., Xu, S., Chen, S., Xiao, X., Zhao, J., & Huang, J. (2021) · Nature Energy · doi:10.1038/s41560-021-00831-8 · Cited by 331
Precursor Engineering for All‐Inorganic CsPbI2Br Perovskite Solar Cells with 14.78% Efficiency
Yin, G., Zhao, H., Jiang, H., Yuan, S., Niu, T., Zhao, K., Liu, Z., & Liu, S. (. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201803269 · Cited by 330
Self-citationLattice anchoring stabilizes solution-processed semiconductors
Liu, M., Chen, Y., Tan, C.-S., Quintero-Bermudez, R., Proppe, A. H., Munir, R., Tan, H., Voznyy, O., Scheffel, B., Walters, G., et al. (2019) · Nature · doi:10.1038/s41586-019-1239-7 · Cited by 294
Verification and mitigation of ion migration in perovskite solar cells
Lee, J.-W., Kim, S.-G., Yang, J.-M., Yang, Y., & Park, N.-G. (2019) · APL Materials · doi:10.1063/1.5085643 · Cited by 271
Zhao, Y., Zhu, P., Huang, S., Tan, S., Wang, M., Wang, R., Xue, J., Han, T.-H., Lee, S.-J., Zhang, A., et al. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.0c09560 · Cited by 222
Sutanto, A. A., Caprioglio, P., Drigo, N., Hofstetter, Y. J., Garcia-Benito, I., Queloz, V. I. E., Neher, D., Nazeeruddin, M. K., Stolterfoht, M., Vaynzof, Y., et al. (2021) · Chem · doi:10.1016/j.chempr.2021.04.002 · Cited by 215
Zhao, H., Han, Y., Xu, Z., Duan, C., Yang, S., Yuan, S., Yang, Z., Liu, Z., & Liu, S. (. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201902279 · Cited by 212
Self-citationNbF5: A Novel α‐Phase Stabilizer for FA‐Based Perovskite Solar Cells with High Efficiency
Yuan, S., Qian, F., Yang, S., Cai, Y., Wang, Q., Sun, J., Liu, Z., & Liu, S. (. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201807850 · Cited by 188
Self-citationMultifunctional Conjugated Ligand Engineering for Stable and Efficient Perovskite Solar Cells
Ma, K., Atapattu, H. R., Zhao, Q., Gao, Y., Finkenauer, B. P., Wang, K., Chen, K., Park, S. M., Coffey, A. H., Zhu, C., et al. (2021) · Advanced Materials · doi:10.1002/adma.202100791 · Cited by 186
Chen, J., Lee, D., & Park, N.-G. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b07595 · Cited by 173
Wu, W., Rudd, P. N., Wang, Q., Yang, Z., & Huang, J. (2020) · Advanced Materials · doi:10.1002/adma.202000995 · Cited by 170
Zhao, W., Xu, J., He, K., Cai, Y., Han, Y., Yang, S., Zhan, S., Wang, D., Liu, Z., & Liu, S. (2021) · Nano-Micro Letters · doi:10.1007/s40820-021-00688-2 · Cited by 165
Self-citationTavakoli, M. M., Tress, W., Milić, J. V., Kubicki, D., Emsley, L., & Grätzel, M. (2018) · Energy & Environmental Science · doi:10.1039/c8ee02404a · Cited by 161
Tan, S., Shi, J., Yu, B., Zhao, W., Li, Y., Li, Y., Wu, H., Luo, Y., Li, D., & Meng, Q. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202010813 · Cited by 161
Self-citationWang, Z., Wei, Q., Liu, X., Liu, L., Tang, X., Guo, J., Ren, S., Xing, G., Zhao, D., & Zheng, Y. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202008404 · Cited by 160
He, J., Liu, J., Hou, Y., Wang, Y., Yang, S., & Yang, H. G. (2020) · Nature Communications · doi:10.1038/s41467-020-18015-5 · Cited by 159
Self-citationOrganic Tetrabutylammonium Cation Intercalation to Heal Inorganic CsPbI3 Perovskite
Liu, X., Wang, X., Zhang, T., Miao, Y., Qin, Z., Chen, Y., & Zhao, Y. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202102538 · Cited by 149
Kong, T., Xie, H., Zhang, Y., Song, J. C., Li, Y., Lim, E. L., Hagfeldt, A., & Bi, D. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202101018 · Cited by 149
Fu, X., He, T., Zhang, S., Lei, X., Jiang, Y., Wang, D., Sun, P., Zhao, D., Hsu, H., Li, X., et al. (2021) · Chem · doi:10.1016/j.chempr.2021.08.009 · Cited by 148
Yang, S., Liu, W., Han, Y., Liu, Z., Zhao, W., Duan, C., Che, Y., Gu, H., Li, Y., & Liu, S. F. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202002882 · Cited by 141
Self-citationStructured Perovskite Light Absorbers for Efficient and Stable Photovoltaics
He, T., Jiang, Y., Xing, X., & Yuan, M. (2020) · Advanced Materials · doi:10.1002/adma.201903937 · Cited by 123
Stable and scalable 3D-2D planar heterojunction perovskite solar cells via vapor deposition
Lin, D., Zhang, T., Wang, J., Long, M., Xie, F., Chen, J., Wu, B., Shi, T., Yan, K., Xie, W., et al. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.03.014 · Cited by 117
Self-citationHe, J., Su, J., Lin, Z., Ma, J., Zhou, L., Zhang, S., Liu, S. F., Chang, J., & Hao, Y. (2021) · Advanced Science · doi:10.1002/advs.202101367 · Cited by 103
Self-citationLiu, T., Zhang, J., Qin, M., Wu, X., Li, F., Lu, X., Zhu, Z., & Jen, A. K. ‐. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202009515 · Cited by 95
He, J., Fang, W., Long, R., & Prezhdo, O. V. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b01191 · Cited by 83
Triamine‐Based Aromatic Cation as a Novel Stabilizer for Efficient Perovskite Solar Cells
Kim, J., Yun, A. J., Gil, B., Lee, Y., & Park, B. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201905190 · Cited by 70
Lv, Y., Song, X., Yin, Y., Feng, Y., Ma, H., Hao, C., Jin, S., & Shi, Y. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b17930 · Cited by 55
Li, H., Hao, X., Chang, B., Li, Z., Wang, L., Pan, L. Y., Chen, X., & Yin, L. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c06533 · Cited by 55
Cai, Y., Wen, J., Liu, Z., Fang, Q., Duan, C., He, K., Zhao, W., Zhan, S., Yang, S., Cui, J. Y., et al. (2021) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2021.05.042 · Cited by 54
Self-citationBand engineering at the interface of all-inorganic CsPbI 2 Br solar cells
Zhuang, J., Wei, Y., Luan, Y., Chen, N., Mao, P., Cao, S., & Wang, J. (2019) · Nanoscale · doi:10.1039/c9nr03638e · Cited by 50
Color-Stable Blue Light-Emitting Diodes Enabled by Effective Passivation of Mixed Halide Perovskites
Yu, H., Wang, H., Zhang, T., Yi, C., Zheng, G., Yin, C., Karlsson, M., Qin, J., Wang, J., Liu, X., et al. (2021) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.1c01547 · Cited by 36
Liang, J., Chen, C., Hu, X., Xiao, M., Wang, C., Yao, F., Li, J., Wang, H., He, J., Da, B., et al. (2021) · Solar RRL · doi:10.1002/solr.202100249 · Cited by 17
Cited by
Liu, C., Yang, T., Cai, W., Wang, Y., Chen, X., Wang, S., Huang, W., Du, Y., Wu, N., Wang, Z., et al. (2024) · Advanced Materials · doi:10.1002/adma.202311562 · Cited by 165
Wu, M., Duan, Y., Yang, L., You, P., Li, Z., Wang, J., Zhou, H., Yang, S., Xu, D., Zou, H., et al. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202300128 · Cited by 159
Self-citationProgress and Perspective on Inorganic CsPbI 2 Br Perovskite Solar Cells
Song, J. C., Xie, H., Lim, E. L., Hagfeldt, A., & Bi, D. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202201854 · Cited by 121
Zhou, H., Yang, L., Duan, Y., Wu, M., Li, Y., Xu, D., Zou, H., Wang, J., Yang, S., & Liu, Z. (2023) · Advanced Energy Materials · doi:10.1002/aenm.202204372 · Cited by 102
Self-citationXiao, H., Zuo, C., Yan, K., Jin, Z., Cheng, Y., Tian, H., Xiao, Z., Liu, F., Ding, Y., & Ding, L. (2023) · Advanced Energy Materials · doi:10.1002/aenm.202300738 · Cited by 101
Metadata
- Authors
- Xu, J., Cui, J., Yang, S., Liu, Z., Guo, X., Che, Y., Xu, D., Zhao, W., Yuan, N., Ding, J., & Liu, S. (.
- Affiliations
- Shaanxi Normal University (CN)
- Changzhou University (CN)
- Dalian Institute of Chemical Physics (CN)
- Corresponding author
- Liu, Zhike
- Liu, Shengzhong (Frank)
- ORCID
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2022-06-08
- Volume
- 32
- Issue
- 33
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W4281741985
- Cited by
- 59
- References
- 46
- Citations by year
- 2026: 9 · 2025: 10 · 2024: 18 · 2023: 18 · 2022: 4
- FWCI
- 3.42
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Advanced Functional Materials (publishedVersion)
- Funders
- National Natural Science Foundation of China (62074095)
- Fundamental Research Funds for the Central Universities (GK202002001)
- Higher Education Discipline Innovation Project (B21005)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Perovskite Materials and Applications
- Physical Sciences › Materials Science › Materials Chemistry › 2D Materials and Applications
- Physical Sciences › Materials Science › Materials Chemistry › Ferroelectric and Piezoelectric Materials
- Keywords
- CsPbI2Br perovskite, perovskite solar cells, grain boundary passivation, ion migration suppression, phase segregation, device stability, open-circuit voltage, encapsulation, tandem solar cells
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.