Hierarchical Design of 1D Building Blocks for Anisotropic Aerogel
The DOI matches its Crossref record; 55 of the 55 references it cites were found in a registry or an index.
Abstract
The structural integrity and continuity are prerequisites for exploiting the performance advantages of aerogels, while limitations in mechanical properties, such as low strength, high brittleness, and poor processability confine fully intact aerogels to laboratory settings. Here, a composite aerogel SPCCAM designed with hierarchical structuring into 1D building blocks at the nanoscale and honeycomb‐like anisotropic architecture at the microscale is presented. The inner carboxylated cellulose nanofiber core (CNFs‐C) exhibits much higher strength than the intermediate polybenzoxazine (PBOZ) shell, and the interface is highly reinforced by a crosslinked network of amino and hydrogen bonds, forming a highly stable 1D building block. Superhydrophobic SiO 2 nanoparticle (hydrophobic‐260) is discretely distributed on the outer surface of the PBOZ shell, resulting in a nanoscale lotus leaf effect. Thus, the SPCCAM demonstrates outstanding properties including ultrahigh strength, excellent deformability and fatigue resistance, good machinability, ultralow thermal conductivity and coefficient of linear expansion, and superhydrophobicity from the inside out and long‐term hydrophobic stability along the radial direction of microscale channels, defining a novel method for designing aerogels with superior integrated mechanical, thermal insulation, and hydrophobic properties, and offering an attractive solution for high‐efficiency thermal insulators in high‐moisture extreme environments, such as deep‐sea and polar regions.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“This pronounced difference was attributed to the unique directional pore structure, which exhibited strong anisotropy, resulting in higher compressive stress under the same strain. 54,55”
From Gradient-structured directional porous floatable aerogels for effective solar-driven hydrogen production and steam generation (2025) · cites this paper as [55]
Citations
Cites
Cellulose nanomaterials review: structure, properties and nanocomposites
Moon, R. J., Martini, A., Nairn, J., Simonsen, J., & Youngblood, J. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00108b · Cited by 6,756
Ultralight nanofibre-assembled cellular aerogels with superelasticity and multifunctionality
Si, Y., Yu, J., Tang, X., Ge, J., & Ding, B. (2014) · Nature Communications · doi:10.1038/ncomms6802 · Cited by 1,148
Double-negative-index ceramic aerogels for thermal superinsulation
Xu, X., Zhang, Q., Hao, M., Hu, Y., Lin, Z., Peng, L., Wang, T., Ren, X., Wang, C., Zhao, Z., et al. (2019) · Science · doi:10.1126/science.aav7304 · Cited by 793
Si, Y., Wang, X., Dou, L., Yu, J., & Ding, B. (2018) · Science Advances · doi:10.1126/sciadv.aas8925 · Cited by 673
Hypocrystalline ceramic aerogels for thermal insulation at extreme conditions
Guo, J., Fu, S., Deng, Y., Xu, X., Laima, S., Liu, D., Zhang, P., Zhou, J., Zhao, H., Yu, H., et al. (2022) · Nature · doi:10.1038/s41586-022-04784-0 · Cited by 522
Jia, C., Li, L., Liu, Y., Fang, B., Ding, H., Song, J., Liu, Y., Xiang, K., Lin, S., Li, Z., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-17533-6 · Cited by 412
Self-citationSu, L., Wang, H., Niu, M., Dai, S., Cai, Z., Yang, B., Huyan, H., & Pan, X. (2020) · Science Advances · doi:10.1126/sciadv.aay6689 · Cited by 351
Zhuo, H., Hu, Y., Tong, X., Chen, Z., Zhong, L., Lai, H., Liu, L., Jing, S., Liu, Q., Liu, C., et al. (2018) · Advanced Materials · doi:10.1002/adma.201706705 · Cited by 336
Su, L., Li, M., Wang, H., Niu, M., Lu, D., & Cai, Z. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b02869 · Cited by 237
A Study on Hydrogen-Bonded Network Structure of Polybenzoxazines
Kim, H.-D., & Ishida, H. (2002) · The Journal of Physical Chemistry A · doi:10.1021/jp010606p · Cited by 232
Cited by
Zhang, Z., Liu, C., Li, N., Guo, W., Li, Y., Yang, P., Zhang, S. Y., & Wang, Z. (2025) · Advanced Science · doi:10.1002/advs.202416740 · Cited by 51
Advances in Micro/Nanofiber‐Based Porous Materials for High‐Performance Thermal Insulation
Gong, X., Shi, S., Yin, J., Liu, R., Chen, J., & Wang, X. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202509492 · Cited by 50
Jin, Z., Wang, H., Pang, B., Li, S., Xu, M., & Shen, A. (2026) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-026-01823-6 · Cited by 42
“Additionally, there is a significant chemical degrada - tion in the resin matrix during corrosion, especially when water molecules, hydroxide ions and high temperatures are combined, which leads to the breaking of macromolecular chains in the epoxy resin network [39].”
Luo, Y., Wang, Y., Liao, Y., Qiang, R., Yuan, Y., Ma, Y., Sun, X., Xu, H., Zhang, E., & Li, Y. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.160453 · Cited by 15
Self-citationLong, X., Tang, J., Luo, C., Qin, J., Wang, Y., Zhou, L., Wei, X., Ying, L., Shi, S., & Liao, J. (2025) · Nano Letters · doi:10.1021/acs.nanolett.5c01080 · Cited by 13
Self-citation
Metadata
- Authors
- Long, X., Qin, J., Tang, J., Xue, J., Wang, Y., Zhou, L., Wang, S., Wei, X., Lin, Y., & Liao, J.
- Affiliations
- University of Electronic Science and Technology of China (CN)
- The Yangtze Delta Region Institute (Quzhou) University of Electronic Science and Technology of China Quzhou 324003 P. R. China
- Corresponding author
- Wei, Xiongbang
- Liao, Jiaxuan
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2024-09-05
- Volume
- 35
- Issue
- 2
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W4402282740
- Semantic Scholar
- 54d4f062e3b026f76dc034219b0b298ac3fc5264
- Cited by
- 25
- References
- 55
- Citations by year
- 2026: 14 · 2025: 10 · 2024: 1
- FWCI
- 3.12
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Advanced Functional Materials (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Aerogels and thermal insulation
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › Surface Modification and Superhydrophobicity
- Keywords
- composite aerogels, hierarchy, carboxylated cellulose nanofibers, superhydrophobicity, lotus effect, thermal insulation, low thermal conductivity, mechanical strength, fatigue resistance
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Hierarchical Design of 1D Building Blocks for Anisotropic Aerogel. https://app.cochat.ai/papers/10.1002/adfm.202413018
- The paper
- Long, X., Qin, J., Tang, J., Xue, J., Wang, Y., Zhou, L., Wang, S., Wei, X., Lin, Y., & Liao, J. (2025). Hierarchical Design of 1D Building Blocks for Anisotropic Aerogel. Advanced Functional Materials. https://doi.org/10.1002/adfm.202413018
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.