The DOI matches its Crossref record; 76 of the 76 references it cites were found in a registry or an index.
Advances in Tailoring Resorcinol‐Formaldehyde Organic and Carbon Gels
Abstract
An overview on the preparation and properties of resorcinol‐formaldehyde (RF) organic and carbon gels reveals the fascinating and remarkably flexible properties of RF carbon and organic gels and how these properties are related to the synthesis and processing conditions. The structural properties can be easily tailored by rigidly controlling such conditions. However, slight variations in some conditions may cause drastic variations in the structural characteristics, and hence properties. Therefore, the effects of different conditions must be well‐understood before attempting to tailor organic or carbon gels to specific applications. The most important factors that affect the properties of an organic gel are the precursor concentrations, the catalyst type and concentration, the time and temperature of curing, and the drying method. In addition to these factors, characteristics of activated carbon gels also depend on the pyrolysis temperature and the activation method. These conditions impact the structural and performance characteristics significantly.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Carbon materials for the electrochemical storage of energy in capacitors
Frackowiak, E., & Béguin, F. (2001) · Carbon · doi:10.1016/s0008-6223(00)00183-4 · Cited by 4,523
Organic aerogels from the polycondensation of resorcinol with formaldehyde
Pekala, R. W. (1989) · Journal of Materials Science · doi:10.1007/bf01139044 · Cited by 1,811
Preparation and Properties of Resorcinol–Formaldehyde Organic and Carbon Gels
Al‐Muhtaseb, S. A., & Ritter, J. A. (2003) · Advanced Materials · doi:10.1002/adma.200390020 · Cited by 1,023
Self-citationCarbon aerogels for catalysis applications: An overview
Moreno-Castilla, C., & Maldonado-Hódar, F. J. (2005) · Carbon · doi:10.1016/j.carbon.2004.10.022 · Cited by 676
A DRIFTS study of the formation of surface groups on carbon by oxidation
Fanning, P. E., & Vannice, M. A. (1993) · Carbon · doi:10.1016/0008-6223(93)90009-y · Cited by 644
Introduction to Sol-Gel Processing
Pierre, A. C. (1998) · The Kluwer International Series in Sol-Gel Processing: Technology and Applications · doi:10.1007/978-1-4615-5659-6 · Cited by 636
Carbon aerogels for electrochemical applications
Pekala, R. W., Farmer, J. C., Alviso, C. T., Tran, T. D., Mayer, S. T., Miller, J. M., & Dunn, B. (1998) · Journal of Non-Crystalline Solids · doi:10.1016/s0022-3093(98)00011-8 · Cited by 559
Effect of HNO3 treatment on the surface acidity of activated carbons
Noh, J. S., & Schwarz, J. A. (1990) · Carbon · doi:10.1016/0008-6223(90)90069-b · Cited by 529
Chemical processing of advanced materials
Hench, L. L., & West, J. K. (1992) · Materials & Design · doi:10.1016/0261-3069(92)90248-g · Cited by 519
Catalytic Graphitization of Carbon Aerogels by Transition Metals
Maldonado-Hódar, F. J., Moreno-Castilla, C., Rivera-Utrilla, J., Hanzawa, Y., & Yamada, Y. (2000) · Langmuir · doi:10.1021/la991080r · Cited by 494
Job, N., Théry, A., Pirard, R., Marien, J., Kocon, L., Rouzaud, J.-N., Béguin, F., & Pirard, J.-P. (2005) · Carbon · doi:10.1016/j.carbon.2005.04.031 · Cited by 458
Otake, Y., & Jenkins, R. G. (1993) · Carbon · doi:10.1016/0008-6223(93)90163-5 · Cited by 446
Chemistry and Application of Phenolic Resins
Knop, A., & Scheib, W. (1979) · Polymers Properties and Applications · doi:10.1007/978-3-662-11309-7 · Cited by 374
Porous carbon xerogels with texture tailored by pH control during sol–gel process
Job, N., Pirard, R., Marien, J., & Pirard, J.-P. (2004) · Carbon · doi:10.1016/j.carbon.2003.12.072 · Cited by 370
Activation of coal tar pitch carbon fibres: Physical activation vs. chemical activation
Maciá-Agulló, J. A., Moore, B. C., Cazorla-Amorós, D., & Linares-Solano, A. (2004) · Carbon · doi:10.1016/j.carbon.2004.01.013 · Cited by 364
Effect of synthesis pH on the structure of carbon xerogels
Lin, C., & Ritter, J. A. (1997) · Carbon · doi:10.1016/s0008-6223(97)00069-9 · Cited by 364
Vinke, P., van der Eijk, M., Verbree, M., Voskamp, A. F., & van Bekkum, H. (1994) · Carbon · doi:10.1016/0008-6223(94)90089-2 · Cited by 320
Brinker, C. J., & Scherer, G. W. (1990) · Sol-Gel Science · doi:10.1016/b978-0-08-057103-4.50013-1 · Cited by 287
Preparation of mesoporous carbon by freeze drying
Tamon, H., Ishizaka, H., Yamamoto, T., & Suzuki, T. (1999) · Carbon · doi:10.1016/s0008-6223(99)00089-5 · Cited by 276
Organic aerogels: microstructural dependence of mechanical properties in compression
Pekala, R. W., Alviso, C. T., & LeMay, J. D. (1990) · Journal of Non-Crystalline Solids · doi:10.1016/0022-3093(90)90324-f · Cited by 273
Tchoul, M. N., Ford, W. T., Lolli, G., Resasco, D. E., & Arepalli, S. (2007) · Chemistry of Materials · doi:10.1021/cm071758l · Cited by 251
Solhy, A., Machado, B. F., Beausoleil, J., Kihn, Y., Gonçalves, F., Pereira, M. F. R., Órfão, J. J. M., Figueiredo, J. L., Faria, J. L., & Serp, P. (2008) · Carbon · doi:10.1016/j.carbon.2008.04.018 · Cited by 217
Preparation of low-density carbon aerogels by ambient pressure drying
Wu, D., Fu, R., Zhang, S., Dresselhaus, M. S., & Dresselhaus, G. (2004) · Carbon · doi:10.1016/j.carbon.2004.04.003 · Cited by 215
A modified activated carbon aerogel for high-energy storage in electric double layer capacitors
Fang, B., & Binder, L. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.09.014 · Cited by 213
Controllability of pore characteristics of resorcinol–formaldehyde carbon aerogel
Horikawa, T., Hayashi, J., & Muroyama, K. (2004) · Carbon · doi:10.1016/j.carbon.2004.02.016 · Cited by 199
Control of mesoporous structure of organic and carbon aerogels
Tamon, H., Ishizaka, H., Araki, T., & Okazaki, M. (1998) · Carbon · doi:10.1016/s0008-6223(97)00202-9 · Cited by 194
On the difference between the isoelectric point and the point of zero charge of carbons
Menéndez, J. A., Illán-Gómez, M. J., y León, C. A. L., & Radovic, L. R. (1995) · Carbon · doi:10.1016/0008-6223(95)96817-r · Cited by 189
New organic aerogels based upon a phenolic-furfural reaction
Pekala, R. W., Alviso, C. T., Lu, X., Gross, J., & Fricke, J. (1995) · Journal of Non-Crystalline Solids · doi:10.1016/0022-3093(95)00027-5 · Cited by 184
Pekala, R. W., & Alviso, C. T. (1992) · MRS Proceedings · doi:10.1557/proc-270-3 · Cited by 176
Papírer, E., Dentzer, J., Li, S., & Donnet, J. B. (1991) · Carbon · doi:10.1016/0008-6223(91)90096-2 · Cited by 172
Influence of freeze-drying conditions on the mesoporosity of organic gels as carbon precursors
Tamon, H., Ishizaka, H., Yamamoto, T., & Suzuki, T. (2000) · Carbon · doi:10.1016/s0008-6223(99)00235-3 · Cited by 170
(2005) · Digital Access to Libraries (Université catholique de Louvain (UCL), l'Université de Namur (UNamur) and the Université Saint-Louis (USL-B)) · doi:10.1007/3-540-28090-1 · Cited by 163
Influence of drying on the morphology of resorcinol–formaldehyde-based carbon gels
Czakkel, O., Marthi, K., Geissler, E., & László, K. (2005) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2005.07.021 · Cited by 163
Kim, S., Hwang, S. W., & Hyun, S. (2005) · Journal of Materials Science · doi:10.1007/s10853-005-6313-x · Cited by 156
Carbonization and activation of sol–gel derived carbon xerogels
Lin, C., & Ritter, J. A. (2000) · Carbon · doi:10.1016/s0008-6223(99)00189-x · Cited by 153
Sol-Gel Processing and Applications
(1994) · Springer eBooks · doi:10.1007/978-1-4615-2570-7 · Cited by 151
Capacitance control of carbon aerogel electrodes
Hwang, S.-W., & Hyun, S. (2004) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2004.07.075 · Cited by 146
Carbon aerogels from dilute catalysis of resorcinol with formaldehyde
Saliger, R., Bock, V., Petricevic, R., Tillotson, T. M., Geis, S., & Fricke, J. (1997) · Journal of Non-Crystalline Solids · doi:10.1016/s0022-3093(97)00411-0 · Cited by 135
Carbon Aerogels as Electrode Material in Supercapacitors
Fischer, U., Saliger, R., Bock, V., Petricevic, R., & Fricke, J. (1997) · Journal of Porous Materials · doi:10.1023/a:1009629423578 · Cited by 134
Preparation of carbon aerogel in ambient conditions for electrical double-layer capacitor
Lee, Y. J., Jung, J. C., Yi, J., Baeck, S., Yoon, J.-R., & Song, I. K. (2009) · Current Applied Physics · doi:10.1016/j.cap.2009.08.017 · Cited by 134
Carbon Aerogels for Electrochemical Double Layer Capacitors
Pröbstle, H., Wiener, M., & Fricke, J. (2003) · Journal of Porous Materials · doi:10.1023/b:jopo.0000011381.74052.77 · Cited by 132
Job, N., Panariello, F., Marien, J., et al. (2005) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2005.11.024 · Cited by 118
Comparison of methods to assess surface acidic groups on activated carbons
Bandosz, T. J., Jagiełło, J., & Schwarz, J. A. (1992) · Analytical Chemistry · doi:10.1021/ac00032a012 · Cited by 116
Li, J., Wang, X., Wang, Y., Huang, Q., Dai, C., Gamboa, S. A., & Sebastian, P. J. (2007) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2007.07.024 · Cited by 111
Physicochemical Surface Properties of Fe, Co, Ni, and Cu-Doped Monolithic Organic Aerogels
Moreno‐Castilla, C., Maldonado‐Hódar, F. J., & Pérez‐Cadenas, A. F. (2003) · Langmuir · doi:10.1021/la034536k · Cited by 106
Resorcinol-formaldehyde based porous carbon as an electrode material for supercapacitors
Zhu, Y., Hu, H., Li, W., & Zhang, X. (2006) · Carbon · doi:10.1016/j.carbon.2006.07.010 · Cited by 106
Activated carbons from bituminous coal: effect of mineral matter content
Linares-Solano, A., Martín-Gullón, I., de Lecea, C. S.-M., & Serrano-Talavera, B. (2000) · Fuel · doi:10.1016/s0016-2361(99)00184-2 · Cited by 106
Contreras, M. S., Martínez, C. P., Zubizarreta, L., Léonard, A., Blacher, S., Olivera-Fuentes, C. G., Arenillas, A., Pirard, J., & Job, N. (2010) · Carbon · doi:10.1016/j.carbon.2010.04.054 · Cited by 97
Tuning of texture and surface chemistry of carbon xerogels
Mahata, N., Pereira, M. F. R., Suárez‐García, F., Martı́nez-Alonso, A., Tascón, J. M. D., & Figueiredo, J. L. (2008) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2008.05.006 · Cited by 94
Nitrogen Adsorption in Carbon Aerogels: A Molecular Simulation Study
Gavalda, S., Gubbins, K. E., Hanzawa, Y., Kaneko, K., & Thomson, K. T. (2002) · Langmuir · doi:10.1021/la011132o · Cited by 92
Controlling the surface chemistry of carbon xerogels using HNO3-hydrothermal oxidation
Silva, A. M. T., Machado, B., Figueiredo, J. L., et al. (2009) · Carbon · doi:10.1016/j.carbon.2009.02.022 · Cited by 92
Tailoring the textural properties of activated carbon xerogels by chemical activation with KOH
Zubizarreta, L., Arenillas, A., Pirard, J., Pis, J. J., & Job, N. (2008) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2008.02.023 · Cited by 86
Structure of carbon aerogels near the gelation limit of the resorcinol–formaldehyde precursor
Petricevic, R., Reichenauer, G., Bock, V., Emmerling, A., & Fricke, J. (1998) · Journal of Non-Crystalline Solids · doi:10.1016/s0022-3093(98)00006-4 · Cited by 81
Preparation of resorcinol–formaldehyde carbon cryogel microhoneycombs
Nishihara, H., Mukai, S. R., & Tamon, H. (2004) · Carbon · doi:10.1016/j.carbon.2004.01.075 · Cited by 81
Sol−Gel-Derived Carbon Aerogels and Xerogels: Design of Experiments Approach to Materials Synthesis
Zanto, E. J., Al‐Muhtaseb, S. A., & Ritter, J. A. (2002) · Industrial & Engineering Chemistry Research · doi:10.1021/ie020048g · Cited by 80
Self-citationCarbon aerogel spheres prepared via alcohol supercritical drying
Liu, N., Zhang, S., Fu, R., Dresselhaus, M. S., & Dresselhaus, G. F. (2006) · Carbon · doi:10.1016/j.carbon.2006.04.032 · Cited by 75
Drying of aerogels in different solvents between atmospheric and supercritical pressures
Kirkbir, F., Murata, H., Meyers, D. E., & Chaudhuri, S. R. (1998) · Journal of Non-Crystalline Solids · doi:10.1016/s0022-3093(98)00003-9 · Cited by 73
Carbon xerogels as catalyst supports: Study of mass transfer
Job, N., Heinrichs, B., Lambert, S., Pirard, J., Colomer, J., Vertruyen, B., & Marien, J. (2006) · AIChE Journal · doi:10.1002/aic.10870 · Cited by 70
Acetic Acid Catalyzed Carbon Aerogels
Brandt, R., Petricevic, R., Pröbstle, H., & Fricke, J. (2003) · Journal of Porous Materials · doi:10.1023/a:1027486401135 · Cited by 69
Texture control of freeze-dried resorcinol–formaldehyde gels
Kocklenberg, R., Mathieu, B., Blacher, S., Pirard, R., Pirard, J., Sobry, R., & den Bossche, G. V. (1998) · Journal of Non-Crystalline Solids · doi:10.1016/s0022-3093(98)00101-x · Cited by 69
Structural Investigation of Resorcinol Formaldehyde and Carbon Aerogels Using SAXS and BET
Bock, V., Emmerling, A., Saliger, R., & Fricke, J. (1997) · Journal of Porous Materials · doi:10.1023/a:1009681407649 · Cited by 69
Sepehri, S., García, B. B., Zhang, Q., et al. (2009) · Carbon · doi:10.1016/j.carbon.2009.01.034 · Cited by 68
Microporosity in carbon aerogels
Reichenauer, G., Emmerling, A., Fricke, J., & Pekala, R. W. (1998) · Journal of Non-Crystalline Solids · doi:10.1016/s0022-3093(98)00118-5 · Cited by 66
Freeze-dried resorcinol-formaldehyde gels
Mathieu, B., Blacher, S., Pirard, R., Pirard, J., Sahouli, B., & Brouers, F. (1997) · Journal of Non-Crystalline Solids · doi:10.1016/s0022-3093(97)00025-2 · Cited by 63
Template-directed synthesis of periodic macroporous organic and carbon aerogels
Baumann, T. F., & Satcher, J. H. (2004) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2004.05.018 · Cited by 56
Synthesis of carbon xerogel particles and fractal-like structures
Sharma, C. S., Kulkarni, M. M., Sharma, A., et al. (2008) · Chemical Engineering Science · doi:10.1016/j.ces.2008.12.013 · Cited by 54
Tonanon, N., Wareenin, Y., Siyasukh, A., Tanthapanichakoon, W., Nishihara, H., Mukai, S. R., & Tamon, H. (2006) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2006.09.017 · Cited by 45
Job, N., Panariello, F., Crine, M., Pirard, J., & Léonard, A. (2006) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2006.07.037 · Cited by 43
Morphology of heat-treated tunsgten doped monolithic carbon aerogels
Maldonado‐Hódar, F. J., Pérez‐Cadenas, A. F., & Moreno‐Castilla, C. (2003) · Carbon · doi:10.1016/s0008-6223(03)00069-1 · Cited by 41
Carbon Cloth Reinforced Carbon Aerogel Films Derived from Resorcinol Formaldehyde
Wang, J., Glora, M., Petricevic, R., Saliger, R., Pröbstle, H., & Fricke, J. (2001) · Journal of Porous Materials · doi:10.1023/a:1009607211736 · Cited by 39
Conceição, F. L., Carrott, P. J. M., & Carrott, M. M. L. R. (2009) · Carbon · doi:10.1016/j.carbon.2009.03.026 · Cited by 39
Scherdel, C., Scherb, T., & Reichenauer, G. (2009) · Carbon · doi:10.1016/j.carbon.2009.04.015 · Cited by 32
Can highly activated carbons be prepared with a homogeneous micropore size distribution?
Lozano‐Castelló, D., Cazorla‐Amorós, D., & Linares-Solano, A. (2002) · Fuel Processing Technology · doi:10.1016/s0378-3820(02)00048-6 · Cited by 30
Synthesis of multi-shell carbon microspheres
Shen, J., Li, J., Chen, Q., Luo, T., Yu, W., & Qian, Y. (2005) · Carbon · doi:10.1016/j.carbon.2005.05.049 · Cited by 23
Synthesis of resorcinol/formaldehyde gel particles by the sol- emulsion–gel technique
Lee, H.-J., Song, J.-H., & Kim, J. H. (1998) · Materials Letters · doi:10.1016/s0167-577x(98)00091-3 · Cited by 16
A model-independent analysis of nitrogen adsorption isotherms on oxidized active carbons
Choma, J., & Jaroniec, M. (2001) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/s0927-7757(01)00572-6 · Cited by 15
Cited by
Biomass-derived carbon: synthesis and applications in energy storage and conversion
Deng, J., Li, M., & Wang, Y. (2016) · Green Chemistry · doi:10.1039/c6gc01172a · Cited by 956
Shiraishi, Y., Takii, T., Hagi, T., Mori, S., Kofuji, Y., Kitagawa, Y., Tanaka, S., Ichikawa, S., & Hirai, T. (2019) · Nature Materials · doi:10.1038/s41563-019-0398-0 · Cited by 882
Ultralight, Flexible, and Fire‐Resistant Carbon Nanofiber Aerogels from Bacterial Cellulose
Wu, Z., Li, C., Liang, H., Chen, J., & Yu, S. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201209676 · Cited by 769
Bi, H., Yin, Z., Cao, X., Xie, X., Tan, C., Huang, X., Chen, B., Chen, F., Yang, Q., Bu, X., et al. (2013) · Advanced Materials · doi:10.1002/adma.201302435 · Cited by 667
Cellulose Aerogels: Synthesis, Applications, and Prospects
Long, L.-Y., Weng, Y.-X., & Wang, Y.-Z. (2018) · Polymers · doi:10.3390/polym10060623 · Cited by 568
Metadata
- Authors
- ElKhatat, A. M., & Al‐Muhtaseb, S. A.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2011-05-24
- Volume
- 23
- Issue
- 26
- Pages
- 2887-2903
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2152860880
- Cited by
- 488
- References
- 76
- FWCI
- 12.08
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.