The DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
Factors Limiting Device Efficiency in Organic Photovoltaics
Open accessAbstract
The power conversion efficiency of the most efficient organic photovoltaic (OPV) cells has recently increased to over 10%. To enable further increases, the factors limiting the device efficiency in OPV must be identified. In this review, the operational mechanism of OPV cells is explained and the detailed balance limit to photovoltaic energy conversion, as developed by Shockley and Queisser, is outlined. The various approaches that have been developed to estimate the maximum practically achievable efficiency in OPV are then discussed, based on empirical knowledge of organic semiconductor materials. Subsequently, approaches made to adapt the detailed balance theory to incorporate some of the fundamentally different processes in organic solar cells that originate from using a combination of two complementary, donor and acceptor, organic semiconductors using thermodynamic and kinetic approaches are described. The more empirical formulations to the efficiency limits provide estimates of 10–12%, but the more fundamental descriptions suggest limits of 20–24% to be reachable in single junctions, similar to the highest efficiencies obtained for crystalline silicon p‐n junction solar cells. Closing this gap sets the stage for future materials research and development of OPV.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films
O'Regan, B., & Grätzel, M. (1991) · Nature · doi:10.1038/353737a0 · Cited by 28,599
Detailed Balance Limit of Efficiency of p-n Junction Solar Cells
Shockley, W., & Queisser, H. J. (1961) · Journal of Applied Physics · doi:10.1063/1.1736034 · Cited by 13,258
Yella, A., Lee, H.-W., Tsao, H. N., Yi, C., Chandiran, A. K., Nazeeruddin, M. K., Diau, E. W.-G., Yeh, C.-Y., Zakeeruddin, S. M., & Grätzel, M. (2011) · Science · doi:10.1126/science.1209688 · Cited by 5,977
Design Rules for Donors in Bulk‐Heterojunction Solar Cells—Towards 10 % Energy‐Conversion Efficiency
Scharber, M. C., Mühlbacher, D., Koppe, M., Denk, P., Waldauf, C., Heeger, A. J., & Brabec, C. J. (2006) · Advanced Materials · doi:10.1002/adma.200501717 · Cited by 5,205
Efficient Tandem Polymer Solar Cells Fabricated by All-Solution Processing
Kim, J. Y., Lee, K., Coates, N. E., Moses, D., Nguyen, T.-Q., Dante, M., & Heeger, A. J. (2007) · Science · doi:10.1126/science.1141711 · Cited by 3,270
2.5% efficient organic plastic solar cells
Shaheen, S. E., Brabec, C. J., Sariciftci, N. S., Padinger, F., Fromherz, T., & Hummelen, J. C. (2001) · Applied Physics Letters · doi:10.1063/1.1345834 · Cited by 2,613
Effects of Postproduction Treatment on Plastic Solar Cells
Padinger, F., Rittberger, R. S., & Sariciftci, N. S. (2003) · Advanced Functional Materials · doi:10.1002/adfm.200390011 · Cited by 2,018
Origin of the Open Circuit Voltage of Plastic Solar Cells
Brabec, C. J., Cravino, A., Meissner, D., Sariciftci, N. S., Fromherz, T., Rispens, M. T., Sanchez, L., & Hummelen, J. C. (2001) · Advanced Functional Materials · doi:10.1002/1616-3028(200110)11:5<374::aid-adfm374>3.0.co;2-w · Cited by 1,808
Tandem polymer solar cells featuring a spectrally matched low-bandgap polymer
Dou, L., You, J., Yang, J., Chen, C.-C., He, Y., Murase, S., Moriarty, T., Emery, K., Li, G., & Yang, Y. (2012) · Nature Photonics · doi:10.1038/nphoton.2011.356 · Cited by 1,416
Rau, U. (2007) · Physical Review B · doi:10.1103/physrevb.76.085303 · Cited by 1,231
Cited by
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Recent Advances in Bulk Heterojunction Polymer Solar Cells
Lu, L., Zheng, T., Wu, Q., Schneider, A. M., Zhao, D., & Yu, L. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00098 · Cited by 2,550
Next-generation organic photovoltaics based on non-fullerene acceptors
Cheng, P., Li, G., Zhan, X., & Yang, Y. (2018) · Nature Photonics · doi:10.1038/s41566-018-0104-9 · Cited by 1,905
Nonfullerene Acceptor Molecules for Bulk Heterojunction Organic Solar Cells
Zhang, G., Zhao, J., Chow, P. C. Y., Jiang, K., Zhang, J., Zhu, Z., Zhang, J., Huang, F., & Yan, H. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00535 · Cited by 1,661
A Large‐Bandgap Conjugated Polymer for Versatile Photovoltaic Applications with High Performance
Zhang, M., Guo, X., Ma, W., Ade, H., & Hou, J. (2015) · Advanced Materials · doi:10.1002/adma.201502110 · Cited by 1,247
Low-Bandgap Near-IR Conjugated Polymers/Molecules for Organic Electronics
Dou, L., Liu, Y., Hong, Z., Li, G., & Yang, Y. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00165 · Cited by 1,222
25th Anniversary Article: A Decade of Organic/Polymeric Photovoltaic Research
Dou, L., You, J., Hong, Z., Xu, Z., Li, G., Street, R. A., & Yang, Y. (2013) · Advanced Materials · doi:10.1002/adma.201302563 · Cited by 1,151
“Green” electronics: biodegradable and biocompatible materials and devices for sustainable future
Irimia-Vladu, M. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60235d · Cited by 1,044
Bin, H., Gao, L., Zhang, Z.-G., Yang, Y., Zhang, Y., Zhang, C., Chen, S., Xue, L., Yang, C., Xiao, M., et al. (2016) · Nature Communications · doi:10.1038/ncomms13651 · Cited by 987
Zhu, Z., Ma, J., Wang, Z., Mu, C., Fan, Z., Du, L., Bai, Y., Fan, L., Yan, H., Phillips, D. L., et al. (2014) · Journal of the American Chemical Society · doi:10.1021/ja4132246 · Cited by 782
The role of reticular chemistry in the design of CO2 reduction catalysts
Diercks, C. S., Liu, Y., Cordova, K. E., & Yaghi, O. M. (2018) · Nature Materials · doi:10.1038/s41563-018-0033-5 · Cited by 721
Charge carrier recombination in organic solar cells
Proctor, C. M., Kuik, M., & Nguyen, T.-Q. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.08.008 · Cited by 704
A History and Perspective of Non‐Fullerene Electron Acceptors for Organic Solar Cells
Armin, A., Li, W., Sandberg, O. J., Xiao, Z., Ding, L., Nelson, J., Neher, D., Vandewal, K., Shoaee, S., Wang, T., et al. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202003570 · Cited by 545
Self-citationAdditives for morphology control in high-efficiency organic solar cells
Liao, H.-C., Ho, C.-C., Chang, C.-Y., Jao, M.-H., Darling, S. B., & Su, W.-F. (2013) · Materials Today · doi:10.1016/j.mattod.2013.08.013 · Cited by 535
Comprehensive Understanding of the Thriving Ambient Electrochemical Nitrogen Reduction Reaction
Zhao, X., Hu, G., Chen, G., Zhang, H., Zhang, S., & Wang, H. (2021) · Advanced Materials · doi:10.1002/adma.202007650 · Cited by 503
Azobenzene-based solar thermal fuels: design, properties, and applications
Dong, L., Feng, Y., Wang, L., & Feng, W. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00470f · Cited by 474
Organic Solar Cells with 18% Efficiency Enabled by an Alloy Acceptor: A Two‐in‐One Strategy
Liu, F., Zhou, L., Liu, W., Zhou, Z., Yue, Q., Zheng, W., Sun, R., Liu, W., Xu, S., Fan, H., et al. (2021) · Advanced Materials · doi:10.1002/adma.202100830 · Cited by 467
Progress in Understanding Degradation Mechanisms and Improving Stability in Organic Photovoltaics
Mateker, W. R., & McGehee, M. D. (2017) · Advanced Materials · doi:10.1002/adma.201603940 · Cited by 460
Gao, K., Li, L., Lai, T., Xiao, L., Huang, Y., Huang, F., Peng, J., Cao, Y., Liu, F., Russell, T. P., et al. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b03740 · Cited by 455
Self-citationBurke, T. M., Sweetnam, S., Vandewal, K., & McGehee, M. D. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500123 · Cited by 408
High Quantum Efficiencies in Polymer Solar Cells at Energy Losses below 0.6 eV
Li, W., Hendriks, K. H., Furlan, A., Wienk, M. M., & Janssen, R. A. J. (2015) · Journal of the American Chemical Society · doi:10.1021/ja5131897 · Cited by 392
Self-citationLi, S., Liu, W., Shi, M., Mai, J., Lau, T.-K., Wan, J., Lu, X., Li, C.-Z., & Chen, H. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03481g · Cited by 363
Highly Efficient Fullerene‐Free Polymer Solar Cells Fabricated with Polythiophene Derivative
Qin, Y., Uddin, M. A., Chen, Y., Jang, B., Zhao, K., Zheng, Z., Yu, R., Shin, T. J., Woo, H. Y., & Hou, J. (2016) · Advanced Materials · doi:10.1002/adma.201601803 · Cited by 335
Semitransparent organic photovoltaics for building-integrated photovoltaic applications
Li, Y., Huang, X., Sheriff, H. K. M., & Forrest, S. R. (2022) · Nature Reviews Materials · doi:10.1038/s41578-022-00514-0 · Cited by 335
Long, X., Ding, Z., Dou, C., Zhang, J., Liu, J., & Wang, L. (2016) · Advanced Materials · doi:10.1002/adma.201601205 · Cited by 331
Perovskite Oxide SrTiO3 as an Efficient Electron Transporter for Hybrid Perovskite Solar Cells
Bera, A., Wu, K., Sheikh, A., Alarousu, E., Mohammed, O. F., & Wu, T. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp509753p · Cited by 303
Small-Bandgap Semiconducting Polymers with High Near-Infrared Photoresponse
Hendriks, K. H., Li, W., Wienk, M. M., & Janssen, R. A. J. (2014) · Journal of the American Chemical Society · doi:10.1021/ja506265h · Cited by 287
Self-citationAchieving a high fill factor for organic solar cells
Jao, M.-H., Liao, H.-C., & Su, W.-F. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta00126b · Cited by 279
Materials Design Considerations for Charge Generation in Organic Solar Cells
Dimitrov, S. D., & Durrant, J. R. (2014) · Chemistry of Materials · doi:10.1021/cm402403z · Cited by 260
He, Z., Wu, H., & Cao, Y. (2014) · Advanced Materials · doi:10.1002/adma.201303391 · Cited by 258
Porphyrin‐Based Bulk Heterojunction Organic Photovoltaics: The Rise of the Colors of Life
Kesters, J., Verstappen, P., Kelchtermans, M., Lutsen, L., Vanderzande, D., & Maes, W. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500218 · Cited by 193
Metadata
- Authors
- Janssen, R. A. J., & Nelson, J.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2012-12-06
- Volume
- 25
- Issue
- 13
- Pages
- 1847-1858
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2034771628
- Cited by
- 617
- References
- 43
- FWCI
- 39.48
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.