The DOI matches its Crossref record; 229 of the 229 references it cites were found in a registry or an index.
25th Anniversary Article: A Decade of Organic/Polymeric Photovoltaic Research
Abstract
Organic photovoltaic (OPV) technology has been developed and improved from a fancy concept with less than 1% power conversion efficiency (PCE) to over 10% PCE, particularly through the efforts in the last decade. The significant progress is the result of multidisciplinary research ranging from chemistry, material science, physics, and engineering. These efforts include the design and synthesis of novel compounds, understanding and controlling the film morphology, elucidating the device mechanisms, developing new device architectures, and improving large‐scale manufacture. All of these achievements catalyzed the rapid growth of the OPV technology. This review article takes a retrospective look at the research and development of OPV, and focuses on recent advances of solution‐processed materials and devices during the last decade, particular the polymer version of the materials and devices. The work in this field is exciting and OPV technology is a promising candidate for future thin film solar cells.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–229 of 229
Liu, J., Shao, S., Fang, G., Meng, B., Xie, Z., & Wang, L. (2012) · Advanced Materials · doi:10.1002/adma.201200238 · Cited by 161
Gravure printed flexible organic photovoltaic modules
Kopola, P., Aernouts, T., Sliz, R., Guillerez, S., Ylikunnari, M., Cheyns, D., Välimäki, M. K., Tuomikoski, M., Hast, J. T., Jabbour, G. E., et al. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2010.12.020 · Cited by 160
Blankenburg, L., Schultheis, K., Schache, H., Sensfuss, S., & Schrödner, M. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.12.013 · Cited by 160
Performance of bulk heterojunction photovoltaic devices prepared by airbrush spray deposition
Green, R., Morfa, A., Ferguson, A. J., Kopidakis, N., Rumbles, G., & Shaheen, S. E. (2008) · Applied Physics Letters · doi:10.1063/1.2836267 · Cited by 159
Molecular Packing and Solar Cell Performance in Blends of Polymers with a Bisadduct Fullerene
Cates, N. C., Sweetnam, S. M., Hoke, E. T., Gysel, R., Miller, C. E., Bartelt, J. A., Xie, X., Toney, M. F., & McGehee, M. D. (2012) · Nano Letters · doi:10.1021/nl204421p · Cited by 145
Drummy, L. F., Davis, R. J., Moore, D. L., Durstock, M. F., Vaia, R. A., & Hsu, J. W. P. (2010) · Chemistry of Materials · doi:10.1021/cm102463t · Cited by 142
Sariçiftçi, N. S., Smilowitz, L. B., Heeger, A. J., & Wudl, F. (1993) · Synthetic Metals · doi:10.1016/0379-6779(93)91166-y · Cited by 140
Ashraf, R. S., Schroeder, B. C., Bronstein, H. A., Huang, Z., Thomas, S., Kline, R. J., Brabec, C. J., Rannou, P., Anthopoulos, T. D., Durrant, J. R., et al. (2013) · Advanced Materials · doi:10.1002/adma.201300027 · Cited by 140
Kawano, K., & Adachi, C. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200901573 · Cited by 135
Li, Z., Lu, J., Tse, S.-C., Zhou, J., Du, X., Tao, Y., & Ding, J. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm04166a · Cited by 133
Efficient and stable polymer solar cells with solution-processed molybdenum oxide interfacial layer
Tan, Z., Qian, D., Zhang, W., Li, L., Ding, Y., Xu, Q., Wang, F., & Li, Y. (2012) · Journal of Materials Chemistry A · doi:10.1039/c2ta00325b · Cited by 132
Morphological Device Model for Organic Bulk Heterojunction Solar Cells
Maturová, K., van Bavel, S. S., Wienk, M. M., Janssen, R. A. J., & Kemerink, M. (2009) · Nano Letters · doi:10.1021/nl901511a · Cited by 126
Zimmermann, B., Schleiermacher, H., Niggemann, M., & Würfel, U. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2010.11.025 · Cited by 124
Nanomorphology of PCDTBT:PC 70 BM Bulk Heterojunction Solar Cells
Moon, J. S., Jo, J., & Heeger, A. J. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201100667 · Cited by 124
Efficient Inverted Tandem Polymer Solar Cells with a Solution‐Processed Recombination Layer
Kouijzer, S., Esiner, S., Frijters, C. H., Turbiez, M. G. R., Wienk, M. M., & Janssen, R. A. J. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201100773 · Cited by 110
Yao, Y., Shi, C., Li, G., Shrotriya, V., Pei, Q., & Yang, Y. (2006) · Applied Physics Letters · doi:10.1063/1.2361082 · Cited by 110
Self-citationZhou, Y., Dai, Y., Zheng, Y., Wang, X., Wang, J., & Pei, J. (2013) · Chemical Communications · doi:10.1039/c3cc41803k · Cited by 108
Multilayer formation in spin-coated thin films of low-bandgap polyfluorene:PCBM blends
Björström, C. M., Bernasik, A., Rysz, J., Budkowski, A., Nilsson, S., Svensson, M., Andersson, M. R., Magnusson, K. O., & Moons, E. (2005) · Journal of Physics Condensed Matter · doi:10.1088/0953-8984/17/50/l01 · Cited by 107
Hirade, M., & Adachi, C. (2011) · Applied Physics Letters · doi:10.1063/1.3650472 · Cited by 101
Sun, Y., Cui, C., Wang, H., & Li, Y. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201100378 · Cited by 91
Tan, Z., Zhang, W., Cui, C., Ding, Y., Qian, D., Xu, Q., Li, L., Li, S., & Li, Y. (2012) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp43125d · Cited by 87
Third Generation Photovoltaics
van Sark, W. G. J. H. M., Meijerink, A., Schropp, R. E. I., Fthenakis, V. M., Resources, E. A., Nanophotonics, Analysis, E. S., & 1/1/17, S. P. O. D. B. (2012) · InTech eBooks · doi:10.5772/1386 · Cited by 86
Introduction to Organic Electronic and Optoelectronic Materials and Devices
Sun, S.-S., & Dalton, L. R. (2008) · CRC Press eBooks · doi:10.1201/9781420009194 · Cited by 85
Burkhart, B., Khlyabich, P. P., & Thompson, B. C. (2012) · ACS Macro Letters · doi:10.1021/mz300197c · Cited by 82
Peng, Q., Huang, Q., Hou, X., Chang, P., Xu, J., & Deng, S. (2012) · Chemical Communications · doi:10.1039/c2cc36324k · Cited by 71
Recent development of conjugated oligomers for high-efficiency bulk-heterojunction solar cells
Tang, W., Hai, J., Dai, Y. L., Huang, Z., Lu, B., Yuan, F., Tang, J., & Zhang, F. (2010) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2010.07.003 · Cited by 69
Tzabari, L., & Tessler, N. (2011) · Journal of Applied Physics · doi:10.1063/1.3549820 · Cited by 67
Li, N., Stubhan, T., Baran, D., Min, J., Wang, H., Ameri, T., & Brabec, C. J. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200659 · Cited by 61
Radiation induced damage and recovery in poly(3-hexyl thiophene) based polymer solar cells
Li, G., Yang, Y., Devine, R. A. B., & Mayberry, C. S. (2008) · Nanotechnology · doi:10.1088/0957-4484/19/42/424014 · Cited by 42
Self-citation
Cited by
Research opportunities to advance solar energy utilization
Lewis, N. S. (2016) · Science · doi:10.1126/science.aad1920 · Cited by 2,075
Organic Optoelectronic Materials: Mechanisms and Applications
Ostroverkhova, O. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00127 · Cited by 1,680
Organic thermoelectric materials for energy harvesting and temperature control
Russ, B., Glaudell, A., Urban, J. J., Chabinyc, M. L., & Segalman, R. A. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.50 · Cited by 1,296
Low-Bandgap Near-IR Conjugated Polymers/Molecules for Organic Electronics
Dou, L., Liu, Y., Hong, Z., Li, G., & Yang, Y. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00165 · Cited by 1,222
Self-citationExciton diffusion in organic semiconductors
Mikhnenko, O. V., Blom, P. W. M., & Nguyen, T.-Q. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00925a · Cited by 997
Metadata
- Authors
- Dou, L., You, J., Hong, Z., Xu, Z., Li, G., Street, R. A., & Yang, Y.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2013-09-18
- Volume
- 25
- Issue
- 46
- Pages
- 6642-6671
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2049575788
- Cited by
- 1,151
- References
- 229
- FWCI
- 103.25
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.