The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Lattice Dislocations Enhancing Thermoelectric PbTe in Addition to Band Convergence
Open accessAbstract
Phonon scattering by nanostructures and point defects has become the primary strategy for minimizing the lattice thermal conductivity (κ L) in thermoelectric materials. However, these scatterers are only effective at the extremes of the phonon spectrum. Recently, it has been demonstrated that dislocations are effective at scattering the remaining mid‐frequency phonons as well. In this work, by varying the concentration of Na in Pb 0.97 Eu 0.03 Te, it has been determined that the dominant microstructural features are point defects, lattice dislocations, and nanostructure interfaces. This study reveals that dense lattice dislocations (≈4 × 10 12 cm−2) are particularly effective at reducing κ L. When the dislocation concentration is maximized, one of the lowest κ L values reported for PbTe is achieved. Furthermore, due to the band convergence of the alloyed 3% mol. EuTe the electronic performance is enhanced, and a high thermoelectric figure of merit, zT, of ≈2.2 is achieved. This work not only demonstrates the effectiveness of dense lattice dislocations as a means of lowering κ L, but also the importance of engineering both thermal and electronic transport simultaneously when designing high‐performance thermoelectrics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
Projector augmented-wave method
Blöchl, P. E. (1994) · Physical Review B · doi:10.1103/physrevb.50.17953 · Cited by 92,732
From ultrasoft pseudopotentials to the projector augmented-wave method
Kresse, G., & Joubert, D. (1999) · Physical Review B · doi:10.1103/physrevb.59.1758 · Cited by 85,307
Cooling, Heating, Generating Power, and Recovering Waste Heat with Thermoelectric Systems
Bell, L. E. (2008) · Science · doi:10.1126/science.1158899 · Cited by 6,082
CRC Handbook of Thermoelectrics
(2018) · CRC Press eBooks · doi:10.1201/9781420049718 · Cited by 5,787
High-Thermoelectric Performance of Nanostructured Bismuth Antimony Telluride Bulk Alloys
Poudel, B., Hao, Q., Ma, Y., Lan, Y., Minnich, A., Yu, B., Yan, X., Wang, D., Muto, A., Vashaee, D., et al. (2008) · Science · doi:10.1126/science.1156446 · Cited by 5,606
Ultralow thermal conductivity and high thermoelectric figure of merit in SnSe crystals
Zhao, L.-D., Lo, S.-H., Zhang, Y., Sun, H., Tan, G., Uher, C., Wolverton, C., Dravid, V. P., & Kanatzidis, M. G. (2014) · Nature · doi:10.1038/nature13184 · Cited by 5,218
High-performance bulk thermoelectrics with all-scale hierarchical architectures
Biswas, K., He, J., Blum, I. D., Wu, C.-I., Hogan, T. P., Seidman, D. N., Dravid, V. P., & Kanatzidis, M. G. (2012) · Nature · doi:10.1038/nature11439 · Cited by 4,740
Convergence of electronic bands for high performance bulk thermoelectrics
Pei, Y., Shi, X., LaLonde, A., Wang, H., Chen, L., & Snyder, G. J. (2011) · Nature · doi:10.1038/nature09996 · Cited by 4,263
Self-citationCubic AgPb m SbTe 2+ m : Bulk Thermoelectric Materials with High Figure of Merit
Hsu, K. F., Loo, S., Guo, F., Chen, W., Dyck, J. S., Uher, C., Hogan, T., Polychroniadis, E. K., & Kanatzidis, M. G. (2004) · Science · doi:10.1126/science.1092963 · Cited by 2,927
Lower limit to the thermal conductivity of disordered crystals
Cahill, D. G., Watson, S. K., & Pohl, R. O. (1992) · Physical Review B · doi:10.1103/physrevb.46.6131 · Cited by 2,617
Dense dislocation arrays embedded in grain boundaries for high-performance bulk thermoelectrics
Kim, S. I., Lee, K. H., Mun, H. A., Kim, H. S., Hwang, S. W., Roh, J. W., Yang, D. J., Shin, W. H., Li, X. S., Lee, Y. H., et al. (2015) · Science · doi:10.1126/science.aaa4166 · Cited by 2,084
Self-citationBand Engineering of Thermoelectric Materials
Pei, Y., Wang, H., & Snyder, G. J. (2012) · Advanced Materials · doi:10.1002/adma.201202919 · Cited by 1,793
Self-citationThe Scattering of Low-Frequency Lattice Waves by Static Imperfections
Klemens, P. G. (1955) · Proceedings of the Physical Society. Section A · doi:10.1088/0370-1298/68/12/303 · Cited by 1,457
Effect of Point Imperfections on Lattice Thermal Conductivity
Callaway, J., & von Baeyer, H. C. (1960) · Physical Review · doi:10.1103/physrev.120.1149 · Cited by 1,168
Strained endotaxial nanostructures with high thermoelectric figure of merit
Biswas, K., He, J., Zhang, Q., Wang, G., Uher, C., Dravid, V. P., & Kanatzidis, M. G. (2011) · Nature Chemistry · doi:10.1038/nchem.955 · Cited by 1,034
Intrinsically Minimal Thermal Conductivity in CubicI−V−VI2Semiconductors
Morelli, D. T., Jovovic, V., & Heremans, J. P. (2008) · Physical Review Letters · doi:10.1103/physrevlett.101.035901 · Cited by 982
Semiconducting Lead Chalcogenides
Ravich, Y. I., Efimova, B. A., & Smirnov, I. A. (1970) · Springer eBooks · doi:10.1007/978-1-4684-8607-0 · Cited by 904
Thinking Like a Chemist: Intuition in Thermoelectric Materials
Zeier, W. G., Zevalkink, A., Gibbs, Z. M., Hautier, G., Kanatzidis, M. G., & Snyder, G. J. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201508381 · Cited by 882
Self-citationKim, W., Zide, J., Gossard, A., Klenov, D., Stemmer, S., Shakouri, A., & Majumdar, A. (2006) · Physical Review Letters · doi:10.1103/physrevlett.96.045901 · Cited by 864
Non-equilibrium processing leads to record high thermoelectric figure of merit in PbTe–SrTe
Tan, G., Shi, F., Hao, S., Zhao, L.-D., Chi, H., Zhang, X., Uher, C., Wolverton, C., Dravid, V. P., & Kanatzidis, M. G. (2016) · Nature Communications · doi:10.1038/ncomms12167 · Cited by 665
Low effective mass leading to high thermoelectric performance
Pei, Y., LaLonde, A. D., Wang, H., & Snyder, G. J. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21536e · Cited by 655
Self-citationTellurium as a high-performance elemental thermoelectric
Lin, S., Li, W., Chen, Z., Shen, J., Ge, B., & Pei, Y. (2016) · Nature Communications · doi:10.1038/ncomms10287 · Cited by 513
Self-citationReevaluation of PbTe1−xIx as high performance n-type thermoelectric material
LaLonde, A. D., Pei, Y., & Snyder, G. J. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01314a · Cited by 416
Self-citationFlubacher, P., Leadbetter, A. J., & Morrison, J. A. (1959) · Philosophical Magazine · doi:10.1080/14786435908233340 · Cited by 359
He, J., Girard, S. N., Kanatzidis, M. G., & Dravid, V. P. (2010) · Advanced Functional Materials · doi:10.1002/adfm.200901905 · Cited by 333
Interstitial Point Defect Scattering Contributing to High Thermoelectric Performance in SnTe
Pei, Y., Zheng, L., Li, W., Lin, S., Chen, Z., Wang, Y., Xu, X., Yu, H., Chen, Y., & Ge, B. (2016) · Advanced Electronic Materials · doi:10.1002/aelm.201600019 · Cited by 306
Self-citationHigh Thermoelectric Figure of Merit in PbTe Alloys Demonstrated in PbTe–CdTe
Pei, Y., LaLonde, A. D., Heinz, N. A., & Snyder, G. J. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201100770 · Cited by 289
Self-citationThermopower enhancement in Pb1−xMnxTe alloys and its effect on thermoelectric efficiency
Pei, Y., Wang, H., Gibbs, Z. M., LaLonde, A. D., & Snyder, G. J. (2012) · NPG Asia Materials · doi:10.1038/am.2012.52 · Cited by 243
Self-citationBand and scattering tuning for high performance thermoelectric Sn1−xMnxTe alloys
Li, W., Chen, Z., Lin, S., Chang, Y., Ge, B., Chen, Y., & Pei, Y. (2015) · Journal of Materiomics · doi:10.1016/j.jmat.2015.09.001 · Cited by 223
Self-citationLead Chalcogenides: Physics and Applications
Khokhlov, D. R. (2002) · Medical Entomology and Zoology · Cited by 212
Interstitial Defects Improving Thermoelectric SnTe in Addition to Band Convergence
Zheng, L., Li, W., Lin, S., Li, J., Chen, Z., & Pei, Y. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00671 · Cited by 148
Self-citationValence Bands in Lead Telluride
Allgaier, R. S. (1961) · Journal of Applied Physics · doi:10.1063/1.1777039 · Cited by 142
Nimtz, G., & Schlicht, B. (1983) · Springer tracts in modern physics · doi:10.1007/bfb0044920 · Cited by 115
Band structure engineering through orbital interaction for enhanced thermoelectric power factor
Zhu, H., Sun, W. Q., Armiento, R., Lazić, P., & Ceder, G. (2014) · Applied Physics Letters · doi:10.1063/1.4866861 · Cited by 79
Cited by
Advanced Thermoelectric Design: From Materials and Structures to Devices
Shi, X.-L., Zou, J., & Chen, Z.-G. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00026 · Cited by 2,524
Self-citationHigh Performance Thermoelectric Materials: Progress and Their Applications
Yang, L., Chen, Z., Dargusch, M. S., & Zou, J. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701797 · Cited by 958
Self-citationThermoelectrics: From history, a window to the future
Beretta, D., Neophytou, N., Hodges, J. M., Kanatzidis, M. G., Narducci, D., Martin- Gonzalez, M., Beekman, M., Balke, B., Cerretti, G., Tremel, W., et al. (2019) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2018.09.001 · Cited by 606
Mao, J., Liu, Z., Zhou, J., Zhu, H., Zhang, Q., Chen, G., & Ren, Z. (2018) · Advances in Physics · doi:10.1080/00018732.2018.1551715 · Cited by 592
Low-Symmetry Rhombohedral GeTe Thermoelectrics
Li, J., Zhang, X., Chen, Z., Lin, S., Li, W., Shen, J., Witting, I. T., Faghaninia, A., Chen, Y., Jain, A., et al. (2018) · Joule · doi:10.1016/j.joule.2018.02.016 · Cited by 583
Self-citation
Metadata
- Authors
- Chen, Z., Jian, Z., Li, W., Chang, Y., Ge, B., Hanus, R., Yang, J., Chen, Y., Huang, M., Snyder, G. J., & Pei, Y.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2017-04-11
- Volume
- 29
- Issue
- 23
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2606873714
- Cited by
- 557
- References
- 36
- FWCI
- 24.95
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.