The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Phase‐Transformation Ductilization of Brittle High‐Entropy Alloys via Metastability Engineering
Open accessAbstract
High‐entropy alloys (HEAs) in which interesting physical, chemical, and structural properties are being continuously revealed have recently attracted extensive attention. Body‐centered cubic (bcc) HEAs, particularly those based on refractory elements are promising for high‐temperature application but generally fail by early cracking with limited plasticity at room temperature, which limits their malleability and widespread uses. Here, the “metastability‐engineering” strategy is exploited in brittle bcc HEAs via tailoring the stability of the constituent phases, and transformation‐induced ductility and work‐hardening capability are successfully achieved. This not only sheds new insights on the development of HEAs with excellent combination of strength and ductility, but also has great implications on overcoming the long‐standing strength–ductility tradeoff of metallic materials in general.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
Microstructural development in equiatomic multicomponent alloys
Cantor, B., Chang, I. T. H., Knight, P., & Vincent, A. J. B. (2004) · Materials Science and Engineering: A · doi:10.1016/j.msea.2003.10.257 · Cited by 10,130
A fracture-resistant high-entropy alloy for cryogenic applications
Gludovatz, B., Hohenwarter, A., Catoor, D., Chang, E. H., George, E. P., & Ritchie, R. O. (2014) · Science · doi:10.1126/science.1254581 · Cited by 5,714
Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
Li, Z., Pradeep, K. G., Deng, Y., Raabe, D., & Tasan, C. C. (2016) · Nature · doi:10.1038/nature17981 · Cited by 4,071
The conflicts between strength and toughness
Ritchie, R. O. (2011) · Nature Materials · doi:10.1038/nmat3115 · Cited by 3,989
Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys
Senkov, O. N., Wilks, G. B., Scott, J. M., & Miracle, D. B. (2011) · Intermetallics · doi:10.1016/j.intermet.2011.01.004 · Cited by 3,239
Materials Properties Handbook: Titanium Alloys
Boyer, R. R., Welsch, G. E., & Collings, E. W. (1994) · Medical Entomology and Zoology · Cited by 2,637
Microstructure and room temperature properties of a high-entropy TaNbHfZrTi alloy
Senkov, O. N., Scott, J. M., Senkova, S. V., Miracle, D. B., & Woodward, C. F. (2011) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2011.02.171 · Cited by 1,856
High strength Fe–Mn–(Al, Si) TRIP/TWIP steels development — properties — application
Grässel, O., Krüger, L., Frommeyer, G., & Meyer, L. W. (2000) · International Journal of Plasticity · doi:10.1016/s0749-6419(00)00015-2 · Cited by 1,819
Design of a twinning-induced plasticity high entropy alloy
Deng, Y., Tasan, C. C., Pradeep, K. G., Springer, H., Kostka, A., & Raabe, D. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.04.014 · Cited by 861
Yao, M. J., Pradeep, K. G., Tasan, C. C., & Raabe, D. (2014) · Scripta Materialia · doi:10.1016/j.scriptamat.2013.09.030 · Cited by 685
Ultrastrong ductile and stable high-entropy alloys at small scales
Zou, Y., Ma, H., & Spolenak, R. (2015) · Nature Communications · doi:10.1038/ncomms8748 · Cited by 634
Enhanced mechanical properties of HfMoTaTiZr and HfMoNbTaTiZr refractory high-entropy alloys
Juan, C.-C., Tsai, M.-H., Tsai, C.-W., Lin, C.-M., Wang, W.-R., Yang, C.-C., Chen, S.-K., Lin, S.-J., & Yeh, J.-W. (2015) · Intermetallics · doi:10.1016/j.intermet.2015.03.013 · Cited by 633
Wu, Y. D., Cai, Y. H., Wang, T., Si, J. J., Zhu, J., Wang, Y. D., & Hui, X. D. (2014) · Materials Letters · doi:10.1016/j.matlet.2014.05.134 · Cited by 610
Self-citationDiscovery of a Superconducting High-Entropy Alloy
Koželj, P., Vrtnik, S., Jelen, A., Jazbec, S., Jagličić, Z., Maiti, S., Feuerbacher, M., Steurer, W., & Dolinšek, J. (2014) · Physical Review Letters · doi:10.1103/physrevlett.113.107001 · Cited by 552
Steinmetz, D., Jäpel, T., Wietbrock, B., Eisenlohr, P., Gutiérrez‐Urrutia, I., Saeed‐Akbari, A., Hickel, T., Roters, F., & Raabe, D. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.09.064 · Cited by 550
Size-dependent plasticity in an Nb25Mo25Ta25W25 refractory high-entropy alloy
Zou, Y., Maiti, S., Steurer, W., & Spolenak, R. (2014) · Acta Materialia · doi:10.1016/j.actamat.2013.11.049 · Cited by 541
Herrera, C., Ponge, D., & Raabe, D. (2011) · Acta Materialia · doi:10.1016/j.actamat.2011.04.011 · Cited by 520
Alloy design for intrinsically ductile refractory high-entropy alloys
Sheikh, S., Shafeie, S., Hu, Q., Ahlström, J., Persson, C., Veselý, J., Zýka, J., Klement, U., & Guo, S. (2016) · Journal of Applied Physics · doi:10.1063/1.4966659 · Cited by 509
Takeuchi, A., Amiya, K., Wada, T., Yubuta, K., & Zhang, W. (2014) · JOM · doi:10.1007/s11837-014-1085-x · Cited by 367
Wang, M.-M., Tasan, C. C., Ponge, D., Dippel, A.-C., & Raabe, D. (2015) · Acta Materialia · doi:10.1016/j.actamat.2014.11.010 · Cited by 281
Lilensten, L., Couzinié, J.-P., Bourgon, J., Perrière, L., Dirras, G., Prima, F., & Guillot, I. (2017) · Materials Research Letters · doi:10.1080/21663831.2016.1221861 · Cited by 268
Phase stability of non-equiatomic CoCrFeMnNi high entropy alloys
Ma, D., Yao, M., Pradeep, K. G., Tasan, C. C., Springer, H., & Raabe, D. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.07.030 · Cited by 262
Elastic and plastic properties of as-cast equimolar TiHfZrTaNb high-entropy alloy
Dirras, G., Lilensten, L., Djemia, P., Laurent-Brocq, M., Tingaud, D., Couzinié, J.-P., Perrière, L., Chauveau, T., & Guillot, I. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.12.017 · Cited by 245
Pradeep, K. G., Tasan, C. C., Yao, M. J., Deng, Y., Springer, H., & Raabe, D. (2015) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.09.010 · Cited by 229
Tasan, C. C., Deng, Y., Pradeep, K. G., Yao, M. J., Springer, H., & Raabe, D. (2014) · JOM · doi:10.1007/s11837-014-1133-6 · Cited by 185
New structure in refractory high-entropy alloys
Lilensten, L., Couzinié, J., Perrière, L., Bourgon, J., Emery, N., & Guillot, I. (2014) · Materials Letters · doi:10.1016/j.matlet.2014.06.064 · Cited by 136
Cited by
George, E. P., Raabe, D., & Ritchie, R. O. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0121-4 · Cited by 5,047
High entropy alloys: A focused review of mechanical properties and deformation mechanisms
George, E. P., Curtin, W. A., & Tasan, C. C. (2020) · Acta Materialia · doi:10.1016/j.actamat.2019.12.015 · Cited by 1,917
Development and exploration of refractory high entropy alloys—A review
Senkov, O. N., Miracle, D. B., Chaput, K. J., & Couzinie, J.-P. (2018) · Journal of Materials Research · doi:10.1557/jmr.2018.153 · Cited by 1,631
Mechanical behavior of high-entropy alloys
Li, W., Xie, D., Li, D., Zhang, Y., Gao, Y., & Liaw, P. K. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100777 · Cited by 1,321
Shi, P., Ren, W., Zheng, T., Ren, Z., Hou, X., Peng, J., Hu, P., Gao, Y., Zhong, Y., & Liaw, P. K. (2019) · Nature Communications · doi:10.1038/s41467-019-08460-2 · Cited by 954
Metadata
- Authors
- Huang, H., Wu, Y., He, J., Wang, H., Liu, X., An, K., Wu, W., & Lu, Z.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2017-06-07
- Volume
- 29
- Issue
- 30
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2622849719
- Cited by
- 705
- References
- 27
- FWCI
- 40.09
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.