The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
High‐Performance Polymers Sandwiched with Chemical Vapor Deposited Hexagonal Boron Nitrides as Scalable High‐Temperature Dielectric Materials
Abstract
Polymer dielectrics are the preferred materials of choice for power electronics and pulsed power applications. However, their relatively low operating temperatures significantly limit their uses in harsh‐environment energy storage devices, e.g., automobile and aerospace power systems. Herein, hexagonal boron nitride (h‐BN) films are prepared from chemical vapor deposition (CVD) and readily transferred onto polyetherimide (PEI) films. Greatly improved performance in terms of discharged energy density and charge–discharge efficiency is achieved in the PEI sandwiched with CVD‐grown h‐BN films at elevated temperatures when compared to neat PEI films and other high‐temperature polymer and nanocomposite dielectrics. Notably, the h‐BN‐coated PEI films are capable of operating with >90% charge–discharge efficiencies and delivering high energy densities, i.e., 1.2 J cm−3, even at a temperature close to the glass transition temperature of polymer (i.e., 217 °C) where pristine PEI almost fails. Outstanding cyclability and dielectric stability over a straight 55 000 charge–discharge cycles are demonstrated in the h‐BN‐coated PEI at high temperatures. The work demonstrates a general and scalable pathway to enable the high‐temperature capacitive energy applications of a wide range of engineering polymers and also offers an efficient method for the synthesis and transfer of 2D nanomaterials at the scale demanded for applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Shi, Y., Li, H., & Li, L.-J. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00256c · Cited by 845
Cited by
High-Temperature Dielectric Materials for Electrical Energy Storage
Li, Q., Yao, F.-Z., Liu, Y., Zhang, G., Wang, H., & Wang, Q. (2018) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070317-124435 · Cited by 881
Self-citationFeng, Q.-K., Zhong, S.-L., Pei, J.-Y., Zhao, Y., Zhang, D.-L., Liu, D.-F., Zhang, Y.-X., & Dang, Z.-M. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00793 · Cited by 744
Dielectric polymers for high-temperature capacitive energy storage
Li, H., Zhou, Y., Liu, Y., Li, L., Liu, Y., & Wang, Q. (2021) · Chemical Society Reviews · doi:10.1039/d0cs00765j · Cited by 713
Self-citationYuan, C., Zhou, Y., Zhu, Y., Liang, J., Wang, S., Peng, S., Li, Y., Cheng, S., Yang, M., Hu, J., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-17760-x · Cited by 690
Self-citationZhou, Y., Li, Q., Dang, B., Yang, Y., Shao, T., Li, H., Hu, J., Zeng, R., He, J., & Wang, Q. (2018) · Advanced Materials · doi:10.1002/adma.201805672 · Cited by 489
Self-citation
Metadata
- Authors
- Azizi, A., Gadinski, M. R., Li, Q., AlSaud, M. A., Wang, J., Wang, Y., Wang, B., Liu, F., Chen, L., Alem, N., & Wang, Q.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2017-07-17
- Volume
- 29
- Issue
- 35
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2734954136
- Cited by
- 392
- References
- 1
- FWCI
- 10.82
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: High‐Performance Polymers Sandwiched with Chemical Vapor Deposited Hexagonal Boron Nitrides as Scalable High‐Temperature Dielectric Materials. https://app.cochat.ai/papers/10.1002/adma.201701864
- The paper
- Azizi, A., Gadinski, M. R., Li, Q., AlSaud, M. A., Wang, J., Wang, Y., Wang, B., Liu, F., Chen, L., Alem, N., & Wang, Q. (2017). High‐Performance Polymers Sandwiched with Chemical Vapor Deposited Hexagonal Boron Nitrides as Scalable High‐Temperature Dielectric Materials. Advanced Materials. https://doi.org/10.1002/adma.201701864
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.