The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
An Unusual Strong Visible‐Light Absorption Band in Red Anatase TiO2 Photocatalyst Induced by Atomic Hydrogen‐Occupied Oxygen Vacancies
Abstract
Increasing visible light absorption of classic wide‐bandgap photocatalysts like TiO 2 has long been pursued in order to promote solar energy conversion. Modulating the composition and/or stoichiometry of these photocatalysts is essential to narrow their bandgap for a strong visible‐light absorption band. However, the bands obtained so far normally suffer from a low absorbance and/or narrow range. Herein, in contrast to the common tail‐like absorption band in hydrogen‐free oxygen‐deficient TiO 2, an unusual strong absorption band spanning the full spectrum of visible light is achieved in anatase TiO 2 by intentionally introducing atomic hydrogen‐mediated oxygen vacancies. Combining experimental characterizations with theoretical calculations reveals the excitation of a new subvalence band associated with atomic hydrogen filled oxygen vacancies as the origin of such band, which subsequently leads to active photo‐electrochemical water oxidation under visible light. These findings could provide a powerful way of tailoring wide‐bandgap semiconductors to fully capture solar light.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
Hybrid functionals based on a screened Coulomb potential
Heyd, J., Scuseria, G. E., & Ernzerhof, M. (2003) · The Journal of Chemical Physics · doi:10.1063/1.1564060 · Cited by 19,629
A metal-free polymeric photocatalyst for hydrogen production from water under visible light
Wang, X., Maeda, K., Thomas, A., Takanabe, K., Xin, G., Carlsson, J. M., Domen, K., & Antonietti, M. (2009) · Nature Materials · doi:10.1038/nmat2317 · Cited by 12,532
Visible-Light Photocatalysis in Nitrogen-Doped Titanium Oxides
Asahi, R., Morikawa, T., Ohwaki, T., Aoki, K., & Taga, Y. (2001) · Science · doi:10.1126/science.1061051 · Cited by 12,252
Heterogeneous photocatalyst materials for water splitting
Kudo, A., & Miseki, Y. (2009) · Chem. Soc. Rev. · doi:10.1039/b800489g · Cited by 10,585
Increasing Solar Absorption for Photocatalysis with Black Hydrogenated Titanium Dioxide Nanocrystals
Chen, X., Liu, L., Yu, P. Y., & Mao, S. S. (2011) · Science · doi:10.1126/science.1200448 · Cited by 6,245
Self-citationHeyd, J., Scuseria, G. E., & Ernzerhof, M. (2006) · The Journal of Chemical Physics · doi:10.1063/1.2204597 · Cited by 5,288
Graphene‐Like Carbon Nitride Nanosheets for Improved Photocatalytic Activities
Niu, P., Zhang, L., Liu, G., & Cheng, H. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201200922 · Cited by 3,539
Self-citationAll‐Solid‐State Z‐Scheme Photocatalytic Systems
Zhou, P., Yu, J., & Jaroniec, M. (2014) · Advanced Materials · doi:10.1002/adma.201400288 · Cited by 2,317
Artificial photosynthesis for solar water-splitting
Tachibana, Y., Vayssieres, L., & Durrant, J. R. (2012) · Nature Photonics · doi:10.1038/nphoton.2012.175 · Cited by 2,080
Cited by
Defect engineering in photocatalytic materials
Bai, S., Zhang, N., Gao, C., & Xiong, Y. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.08.058 · Cited by 1,236
An overview of advanced methods for the characterization of oxygen vacancies in materials
Ye, K., Li, K., Lu, Y., Guo, Z., Ni, N., Liu, H., Huang, Y., Ji, H., & Wang, P. (2019) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2019.05.002 · Cited by 669
Inside‐and‐Out Semiconductor Engineering for CO2 Photoreduction: From Recent Advances to New Trends
Wang, S., Han, X., Zhang, Y., Tian, N., Ma, T., & Huang, H. (2021) · Small Structures · doi:10.1002/sstr.202000061 · Cited by 411
Role of oxygen vacancy in metal oxides for photocatalytic CO2 reduction
Jiang, W., Loh, H., Low, B. Q. L., Zhu, H., Low, J., Heng, J. Z. X., Tang, K. Y., Li, Z., Loh, X. J., Ye, E., et al. (2023) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2022.122079 · Cited by 401
Formation, Detection, and Function of Oxygen Vacancy in Metal Oxides for Solar Energy Conversion
Wang, Z., Lin, R., Huo, Y., Li, H., & Wang, L. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202109503 · Cited by 384
Self-citationZhang, Y., Afzal, N., Pan, L., Zhang, X., & Zou, J. (2019) · Advanced Science · doi:10.1002/advs.201900053 · Cited by 344
Kumar, A., & Krishnan, V. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202009807 · Cited by 323
Defect engineering in photocatalysis: formation, chemistry, optoelectronics, and interface studies
Maarisetty, D., & Baral, S. S. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta04297h · Cited by 314
Su, K., Tan, L., Liu, X., Cui, Z., Zheng, Y., Li, B., Han, Y., Li, Z., Zhu, S., Liang, Y., et al. (2020) · ACS Nano · doi:10.1021/acsnano.9b08686 · Cited by 294
Zafar, Z., Yi, S., Li, J., Li, C., Zhu, Y., Zada, A., Yao, W., Liu, Z., & Yue, X. (2022) · ENERGY & ENVIRONMENTAL MATERIALS · doi:10.1002/eem2.12171 · Cited by 284
Mao, M., Yu, K.-X., Cao, C.-F., Gong, L.-X., Zhang, G.-D., Zhao, L., Song, P., Gao, J.-F., & Tang, L.-C. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.131615 · Cited by 276
Ren, L., Zhou, W., Sun, B., Li, H., Qiao, P., Xu, Y., Wu, J., Lin, K., & Fu, H. (2019) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2018.08.033 · Cited by 261
Metadata
- Authors
- Yang, Y., Yin, L., Gong, Y., Niu, P., Wang, J., Gu, L., Chen, X., Liu, G., Wang, L., & Cheng, H.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2018-01-08
- Volume
- 30
- Issue
- 6
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2782873431
- Cited by
- 330
- References
- 38
- FWCI
- 9.73
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.