The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Room‐Temperature Triple‐Ligand Surface Engineering Synergistically Boosts Ink Stability, Recombination Dynamics, and Charge Injection toward EQE‐11.6% Perovskite QLEDs
Abstract
Developing low‐cost and high‐quality quantum dots (QDs) or nanocrystals (NCs) and their corresponding efficient light‐emitting diodes (LEDs) is crucial for the next‐generation ultra‐high‐definition flexible displays. Here, there is a report on a room‐temperature triple‐ligand surface engineering strategy to play the synergistic role of short ligands of tetraoctylammonium bromide (TOAB), didodecyldimethylammonium bromide (DDAB), and octanoic acid (OTAc) toward “ideal” perovskite QDs with a high photoluminescence quantum yield (PLQY) of >90%, unity radiative decay in its intrinsic channel, stable ink characteristics, and effective charge injection and transportation in QD films, resulting in the highly efficient QD‐based LEDs (QLEDs). Furthermore, the QD films with less nonradiative recombination centers exhibit improved PL properties with a PLQY of 61% through dopant engineering in A‐site. The robustness of such properties is demonstrated by the fabrication of green electroluminescent LEDs based on CsPbBr 3 QDs with the peak external quantum efficiency (EQE) of 11.6%, and the corresponding peak internal quantum efficiency (IQE) and power efficiency are 52.2% and 44.65 lm W−1, respectively, which are the most‐efficient perovskite QLEDs with colloidal CsPbBr 3 QDs as emitters up to now. These results demonstrate that the as‐obtained QD inks have a wide range application in future high‐definition QD displays and high‐quality lightings.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Protesescu, L., Yakunin, S., Bodnarchuk, M. I., Krieg, F., Caputo, R., Hendon, C. H., Yang, R. X., Walsh, A., & Kovalenko, M. V. (2015) · Nano Letters · doi:10.1021/nl5048779 · Cited by 9,209
The emergence of perovskite solar cells
Green, M. A., Ho-Baillie, A., & Snaith, H. J. (2014) · Nature Photonics · doi:10.1038/nphoton.2014.134 · Cited by 7,432
Bright light-emitting diodes based on organometal halide perovskite
Tan, Z.-K., Moghaddam, R. S., Lai, M. L., Docampo, P., Higler, R., Deschler, F., Price, M., Sadhanala, A., Pazos, L. M., Credgington, D., et al. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.149 · Cited by 4,450
Light-emitting diodes made from cadmium selenide nanocrystals and a semiconducting polymer
Colvin, V. L., Schlamp, M. C., & Alivisatos, A. P. (1994) · Nature · doi:10.1038/370354a0 · Cited by 4,238
Quantum Dot Light‐Emitting Diodes Based on Inorganic Perovskite Cesium Lead Halides (CsPbX3)
Song, J., Li, J., Li, X., Xu, L., Dong, Y., & Zeng, H. (2015) · Advanced Materials · doi:10.1002/adma.201502567 · Cited by 2,896
Self-citationSolution-processed, high-performance light-emitting diodes based on quantum dots
Dai, X., Zhang, Z., Jin, Y., Niu, Y., Cao, H., Liang, X., Chen, L., Wang, J., & Peng, X. (2014) · Nature · doi:10.1038/nature13829 · Cited by 2,702
Emergence of colloidal quantum-dot light-emitting technologies
Shirasaki, Y., Supran, G. J., Bawendi, M. G., & Bulović, V. (2013) · Nature Photonics · doi:10.1038/nphoton.2012.328 · Cited by 2,635
Li, X., Wu, Y., Zhang, S., Cai, B., Gu, Y., Song, J., & Zeng, H. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201600109 · Cited by 2,545
Self-citationZhang, F., Zhong, H., Chen, C., Wu, X.-G., Hu, X., Huang, H., Han, J., Zou, B., & Dong, Y. (2015) · ACS Nano · doi:10.1021/acsnano.5b01154 · Cited by 2,431
Self-citationImproved air stability of perovskite solar cells via solution-processed metal oxide transport layers
You, J., Meng, L., Song, T.-B., Guo, T.-F., Yang, Y. (., Chang, W.-H., Hong, Z., Chen, H., Zhou, H., Chen, Q., et al. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2015.230 · Cited by 2,123
Perovskite light-emitting diodes based on solution-processed self-organized multiple quantum wells
Wang, N., Cheng, L., Ge, R., Zhang, S., Miao, Y., Zou, W., Yi, C., Sun, Y., Cao, Y., Yang, R., et al. (2016) · Nature Photonics · doi:10.1038/nphoton.2016.185 · Cited by 1,845
Highly narrowband perovskite single-crystal photodetectors enabled by surface-charge recombination
Fang, Y., Dong, Q., Shao, Y., Yuan, Y., & Huang, J. (2015) · Nature Photonics · doi:10.1038/nphoton.2015.156 · Cited by 1,470
High-efficiency quantum-dot light-emitting devices with enhanced charge injection
Mashford, B. S., Stevenson, M., Popovic, Z., Hamilton, C., Zhou, Z., Breen, C., Steckel, J., Bulovic, V., Bawendi, M., Coe-Sullivan, S., et al. (2013) · Nature Photonics · doi:10.1038/nphoton.2013.70 · Cited by 1,186
Li, J., Xu, L., Wang, T., Song, J., Chen, J., Xue, J., Dong, Y., Cai, B., Shan, Q., Han, B., et al. (2017) · Advanced Materials · doi:10.1002/adma.201603885 · Cited by 1,176
Self-citationHighly Efficient Perovskite‐Quantum‐Dot Light‐Emitting Diodes by Surface Engineering
Pan, J., Quan, L. N., Zhao, Y., Peng, W., Murali, B., Sarmah, S. P., Yuan, M., Sinatra, L., Alyami, N. M., Liu, J., et al. (2016) · Advanced Materials · doi:10.1002/adma.201600784 · Cited by 1,126
High-efficiency light-emitting devices based on quantum dots with tailored nanostructures
Yang, Y., Zheng, Y., Cao, W., Titov, A., Hyvonen, J., Manders, J. R., Xue, J., Holloway, P. H., & Qian, L. (2015) · Nature Photonics · doi:10.1038/nphoton.2015.36 · Cited by 1,076
Cesium Enhances Long-Term Stability of Lead Bromide Perovskite-Based Solar Cells
Kulbak, M., Gupta, S., Kedem, N., Levine, I., Bendikov, T., Hodes, G., & Cahen, D. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b02597 · Cited by 1,001
Yang, X., Zhang, X., Deng, J., Chu, Z., Jiang, Q., Meng, J., Wang, P., Zhang, L., Yin, Z., & You, J. (2018) · Nature Communications · doi:10.1038/s41467-018-02978-7 · Cited by 1,001
Enhanced mobility CsPbI 3 quantum dot arrays for record-efficiency, high-voltage photovoltaic cells
Sanehira, E. M., Marshall, A. R., Christians, J. A., Harvey, S. P., Ciesielski, P. N., Wheeler, L. M., Schulz, P., Lin, L. Y., Beard, M. C., & Luther, J. M. (2017) · Science Advances · doi:10.1126/sciadv.aao4204 · Cited by 977
Li, G., Rivarola, F. W. R., Davis, N. J. L. K., Bai, S., Jellicoe, T. C., de la Peña, F., Hou, S., Ducati, C., Gao, F., Friend, R. H., et al. (2016) · Advanced Materials · doi:10.1002/adma.201600064 · Cited by 901
Ultra-bright and highly efficient inorganic based perovskite light-emitting diodes
Zhang, L., Yang, X., Jiang, Q., Wang, P., Yin, Z., Zhang, X., Tan, H., Yang, Y., Wei, M., Sutherland, B. R., et al. (2017) · Nature Communications · doi:10.1038/ncomms15640 · Cited by 857
Wang, H., Lin, S., Tang, A., Singh, B. P., Tong, H., Chen, C., Lee, Y., Tsai, T., & Liu, R. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201603698 · Cited by 846
Strongly emissive perovskite nanocrystal inks for high-voltage solar cells
Akkerman, Q. A., Gandini, M., Di Stasio, F., Rastogi, P., Palazon, F., Bertoni, G., Ball, J. M., Prato, M., Petrozza, A., & Manna, L. (2016) · Nature Energy · doi:10.1038/nenergy.2016.194 · Cited by 721
Song, J., Xu, L., Li, J., Xue, J., Dong, Y., Li, X., & Zeng, H. (2016) · Advanced Materials · doi:10.1002/adma.201600225 · Cited by 679
Self-citationWei, H., DeSantis, D., Wei, W., Deng, Y., Guo, D., Savenije, T. J., Cao, L., & Huang, J. (2017) · Nature Materials · doi:10.1038/nmat4927 · Cited by 660
CsPbxMn1–xCl3 Perovskite Quantum Dots with High Mn Substitution Ratio
Liu, H., Wu, Z., Shao, J., Yao, D., Gao, H., Liu, Y., Yu, W., Zhang, H., & Yang, B. (2017) · ACS Nano · doi:10.1021/acsnano.6b08747 · Cited by 587
Color-Switchable Electroluminescence of Carbon Dot Light-Emitting Diodes
Zhang, X., Zhang, Y., Wang, Y., Kalytchuk, S., Kershaw, S. V., Wang, Y., Wang, P., Zhang, T., Zhao, Y., Zhang, H., et al. (2013) · ACS Nano · doi:10.1021/nn405017q · Cited by 534
Bright Light‐Emitting Diodes Based on Organometal Halide Perovskite Nanoplatelets
Ling, Y., Yuan, Z., Tian, Y., Wang, X., Wang, J. C., Xin, Y., Hanson, K., Ma, B., & Gao, H. (2016) · Advanced Materials · doi:10.1002/adma.201503954 · Cited by 513
Huang, H., Zhao, F., Liu, L., Zhang, F., Wu, X.-G., Shi, L., Zou, B., Pei, Q., & Zhong, H. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b10373 · Cited by 485
Self-citationHighly efficient quantum dot near-infrared light-emitting diodes
Gong, X., Yang, Z., Walters, G., Comin, R., Ning, Z., Beauregard, E., Adinolfi, V., Voznyy, O., & Sargent, E. H. (2016) · Nature Photonics · doi:10.1038/nphoton.2016.11 · Cited by 454
Yassitepe, E., Yang, Z., Voznyy, O., Kim, Y., Walters, G., Castañeda, J. A., Kanjanaboos, P., Yuan, M., Gong, X., Fan, F., et al. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201604580 · Cited by 415
Ling, Y., Tian, Y., Wang, X., Wang, J. C., Knox, J. M., Perez‐Orive, F., Du, Y., Tan, L., Hanson, K., Ma, B., et al. (2016) · Advanced Materials · doi:10.1002/adma.201602513 · Cited by 375
Di Stasio, F., Christodoulou, S., Huo, N., & Konstantatos, G. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b02834 · Cited by 370
Wei, S., Yang, Y., Kang, X., Wang, L., Huang, L., & Pan, D. (2016) · Chemical Communications · doi:10.1039/c6cc01500j · Cited by 368
Chiba, T., Hoshi, K., Pu, Y.-J., Takeda, Y., Hayashi, Y., Ohisa, S., Kawata, S., & Kido, J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b03382 · Cited by 336
Bright Perovskite Nanocrystal Films for Efficient Light-Emitting Devices
Zhang, X., Sun, C., Zhang, Y., Wu, H., Ji, C., Chuai, Y., Wang, P., Wen, S., Zhang, C., & Yu, W. W. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b02073 · Cited by 331
Gao, Y., & Peng, X. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b01314 · Cited by 262
Synthetic Control of Exciton Behavior in Colloidal Quantum Dots
Pu, C., Qin, H., Gao, Y., Zhou, J., Wang, P., & Peng, X. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b11431 · Cited by 261
Blue Quantum Dot Light-Emitting Diodes with High Electroluminescent Efficiency
Wang, L., Lin, J., Hu, Y., Guo, X., Lv, Y., Tang, Z., Zhao, J., Fan, Y., Zhang, N., Wang, Y., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b10785 · Cited by 246
Shang, Y., & Ning, Z. (2016) · National Science Review · doi:10.1093/nsr/nww097 · Cited by 131
Zou, Y., Ban, M., Cui, W., Huang, Q. J., Chen, W., Liu, J., Wu, H., Song, T., & Sun, B. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201603325 · Cited by 129
Engineering the Exciton Dissociation in Quantum‐Confined 2D CsPbBr 3 Nanosheet Films
Yang, Z. M., Wang, M., Qiu, H., Yao, X., Lao, X., Xu, S., Lin, Z., Sun, L., & Shao, J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201705908 · Cited by 120
Wei, S., Yang, Y., Kang, X., Wang, L., Huang, L., & Pan, D. (2017) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.6b02763 · Cited by 65
High‐Performance CsPb1−xSnxBr3 Perovskite Quantum Dots for Light‐Emitting Diodes
Wang, H.-C., Wang, W., Tang, A., Tsai, H., Bao, Z., Ihara, T., Yarita, N., Tahara, H., Kanemitsu, Y., Chen, S., et al. (2017) · Angewandte Chemie · doi:10.1002/ange.201706860 · Cited by 57
Cited by
Perovskite light-emitting diodes with external quantum efficiency exceeding 20 per cent
Lin, K., Xing, J., Quan, L. N., de Arquer, F. P. G., Gong, X., Lu, J., Xie, L., Zhao, W., Zhang, D., Yan, C., et al. (2018) · Nature · doi:10.1038/s41586-018-0575-3 · Cited by 3,355
State of the Art and Prospects for Halide Perovskite Nanocrystals
Dey, A., Ye, J., De, A., Debroye, E., Ha, S. K., Bladt, E., Kshirsagar, A. S., Wang, Z., Yin, J., Wang, Y., et al. (2021) · ACS Nano · doi:10.1021/acsnano.0c08903 · Cited by 1,478
Self-citationWei, Y., Cheng, Z., & Lin, J. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00740c · Cited by 1,206
Organic–Inorganic Hybrid Passivation Enables Perovskite QLEDs with an EQE of 16.48%
Song, J., Fang, T., Li, J., Xu, L., Zhang, F., Han, B., Shan, Q., & Zeng, H. (2018) · Advanced Materials · doi:10.1002/adma.201805409 · Cited by 507
Self-citationWang, H., Zhang, X., Wu, Q., Cao, F., Yang, D., Shang, Y., Ning, Z., Zhang, W., Zheng, W., Yan, Y., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-08425-5 · Cited by 504
Metadata
- Authors
- Song, J., Li, J., Xu, L., Li, J., Zhang, F., Han, B., Shan, Q., & Zeng, H.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2018-06-10
- Volume
- 30
- Issue
- 30
- Pages
- e1800764-e1800764
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2808412608
- Cited by
- 562
- References
- 44
- FWCI
- 26.63
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.