The DOI matches its Crossref record; 48 of the 48 references it cites were found in a registry or an index.
A Semitransparent Inorganic Perovskite Film for Overcoming Ultraviolet Light Instability of Organic Solar Cells and Achieving 14.03% Efficiency
Abstract
Organic solar cells (OSCs) can be unstable under ultraviolet (UV) irradiation. To address this issue and enhance the power conversion efficiency (PCE), an inorganic‐perovskite/organic four‐terminal tandem solar cell (TSC) based on a semitransparent inorganic CsPbBr 3 perovskite solar cell (pero‐SC) as the top cell and an OSC as bottom cell is constructed. The high‐quality CsPbBr 3 photoactive layer of the planar pero‐SC is prepared with a dual‐source vacuum coevaporation method, using stoichiometric precursors of CsBr and PbBr 2 with a low evaporation rate. The resultant opaque planar pero‐SC exhibits an ultrahigh open‐circuit voltage of 1.44 V and the highest reported PCE of 7.78% for a CsPbBr 3‐based planar pero‐SC. Importantly, the devices show no degradation after 120 h UV light illumination. The related semitransparent pero‐SC can almost completely filter UV light and well maintain photovoltaic performance; it additionally shows an extremely high average visible transmittance. When it is used to construct a TSC, the top pero‐SC acting as a UV filter can utilize UV light for photoelectric conversion, avoiding the instability problem of UV light on the bottom OSC that can meet the industrial standards of UV‐light stability for solar cells, and leading to the highest reported PCE of 14.03% for the inorganic‐perovskite/organic TSC.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells
Yang, W. S., Park, B.-W., Jung, E. H., Jeon, N. J., Kim, Y. C., Lee, D. U., Shin, S. S., Seo, J., Kim, E. K., Noh, J. H., et al. (2017) · Science · doi:10.1126/science.aan2301 · Cited by 5,445
Nucleation and growth of thin films
Venables, J. A., Spiller, G. D. T., & Hanbucken, M. (1984) · Reports on Progress in Physics · doi:10.1088/0034-4885/47/4/002 · Cited by 2,930
Quantum Dot Light‐Emitting Diodes Based on Inorganic Perovskite Cesium Lead Halides (CsPbX3)
Song, J., Li, J., Li, X., Xu, L., Dong, Y., & Zeng, H. (2015) · Advanced Materials · doi:10.1002/adma.201502567 · Cited by 2,896
Quantum dot–induced phase stabilization of α-CsPbI 3 perovskite for high-efficiency photovoltaics
Swarnkar, A., Marshall, A. R., Sanehira, E. M., Chernomordik, B. D., Moore, D. T., Christians, J. A., Chakrabarti, T., & Luther, J. M. (2016) · Science · doi:10.1126/science.aag2700 · Cited by 2,794
Molecular Optimization Enables over 13% Efficiency in Organic Solar Cells
Zhao, W., Li, S., Yao, H., Zhang, S., Zhang, Y., Yang, B., & Hou, J. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b02677 · Cited by 2,790
Self-citationAkkerman, Q. A., D’Innocenzo, V., Accornero, S., Scarpellini, A., Petrozza, A., Prato, M., & Manna, L. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b05602 · Cited by 2,197
Zheng, X., Chen, B., Dai, J., Fang, Y., Bai, Y., Lin, Y., Wei, H., Zeng, X. C., & Huang, J. (2017) · Nature Energy · doi:10.1038/nenergy.2017.102 · Cited by 2,154
Improved air stability of perovskite solar cells via solution-processed metal oxide transport layers
You, J., Meng, L., Song, T.-B., Guo, T.-F., Yang, Y. (., Chang, W.-H., Hong, Z., Chen, H., Zhou, H., Chen, Q., et al. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2015.230 · Cited by 2,123
Cited by
Recent progress of inorganic perovskite solar cells
Tai, Q., Tang, K.-C., & Yan, F. (2019) · Energy & Environmental Science · doi:10.1039/c9ee01479a · Cited by 528
Perovskite Tandem Solar Cells: From Fundamentals to Commercial Deployment
Li, H., & Zhang, W. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00780 · Cited by 524
Next-generation applications for integrated perovskite solar cells
Bati, A. S. R., Zhong, Y. L., Burn, P. L., Nazeeruddin, M. K., Shaw, P. E., & Batmunkh, M. (2023) · Communications Materials · doi:10.1038/s43246-022-00325-4 · Cited by 492
Aldrich, T. J., Matta, M., Zhu, W., Swick, S. M., Stern, C. L., Schatz, G. C., Facchetti, A., Melkonyan, F. S., & Marks, T. J. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.8b13653 · Cited by 428
Perovskite Solar Cells for Space Applications: Progress and Challenges
Tu, Y., Wu, J., Xu, G., Yang, X., Cai, R., Gong, Q., Zhu, R., & Huang, W. (2021) · Advanced Materials · doi:10.1002/adma.202006545 · Cited by 404
Self-citationInorganic Halide Perovskite Solar Cells: Progress and Challenges
Tian, J., Xue, Q., Yao, Q., Li, N., Brabec, C. J., & Yip, H. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000183 · Cited by 372
Precursor Engineering for All‐Inorganic CsPbI2Br Perovskite Solar Cells with 14.78% Efficiency
Yin, G., Zhao, H., Jiang, H., Yuan, S., Niu, T., Zhao, K., Liu, Z., & Liu, S. (. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201803269 · Cited by 330
Zhang, M., Chen, Q., Xue, R., Zhan, Y., Wang, C., Lai, J., Yang, J., Lin, H., Yao, J., Li, Y., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-12613-8 · Cited by 330
Self-citationOrganic Solar Cell Materials toward Commercialization
Xue, R., Zhang, J., Li, Y., & Li, Y. (2018) · Small · doi:10.1002/smll.201801793 · Cited by 304
Self-citationShort‐Chain Ligand‐Passivated Stable α‐CsPbI3 Quantum Dot for All‐Inorganic Perovskite Solar Cells
Chen, K., Zhong, Q., Chen, W., Sang, B., Wang, Y., Yang, T., Liu, Y., Zhang, Y., & Zhang, H. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201900991 · Cited by 302
Self-citationZhang, Z., Chen, W., Jiang, X., Cao, J., Yang, H., Chen, H., Yang, F., Shen, Y., Yang, H., Cheng, Q., et al. (2024) · Nature Energy · doi:10.1038/s41560-024-01491-0 · Cited by 298
Self-citationTong, G., Chen, T., Li, H., Qiu, L., Liu, Z., Dang, Y., Song, W., Ono, L. K., Jiang, Y., & Qi, Y. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.104015 · Cited by 274
All-inorganic CsPbBr3 perovskite: a promising choice for photovoltaics
Ullah, S., Wang, J., Yang, P., Liu, L., Yang, S.-E., Xia, T., Guo, H., & Chen, Y. (2021) · Materials Advances · doi:10.1039/d0ma00866d · Cited by 261
Faheem, M. B., Khan, B., Feng, C., Farooq, M. U., Raziq, F., Xiao, Y., & Li, Y. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.9b02338 · Cited by 254
Self-citationSemitransparent Perovskite Solar Cells: From Materials and Devices to Applications
Shi, B., Duan, L., Zhao, Y., Luo, J., & Zhang, X. (2020) · Advanced Materials · doi:10.1002/adma.201806474 · Cited by 253
Chen, Y., Zhao, C., Zhang, T., Wu, X., Zhang, W., & Ding, S. (2021) · Small · doi:10.1002/smll.202007543 · Cited by 30
Metadata
- Authors
- Chen, W., Zhang, J., Xu, G., Xue, R., Li, Y., Zhou, Y., Hou, J., & Li, Y.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2018-04-06
- Volume
- 30
- Issue
- 21
- Pages
- e1800855-e1800855
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2797825274
- Cited by
- 348
- References
- 48
- FWCI
- 17.31
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.