The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Melt‐Centrifuged (Bi,Sb)2Te3: Engineering Microstructure toward High Thermoelectric Efficiency
Abstract
Microstructure engineering is an effective strategy to reduce lattice thermal conductivity (κ l) and enhance the thermoelectric figure of merit (zT). Through a new process based on melt‐centrifugation to squeeze out excess eutectic liquid, microstructure modulation is realized to manipulate the formation of dislocations and clean grain boundaries, resulting in a porous network with a platelet structure. In this way, phonon transport is strongly disrupted by a combination of porosity, pore surfaces/junctions, grain boundaries, and lattice dislocations. These collectively result in a ≈60% reduction of κ l compared to zone melted ingot, while the charge carriers remain relatively mobile across the liquid‐fused grains. This porous material displays a zT value of 1.2, which is higher than fully dense conventional zone melted ingots and hot pressed (Bi,Sb)2 Te 3 alloys. A segmented leg of melt‐centrifuged Bi 0.5 Sb 1.5 Te 3 and Bi 0.3 Sb 1.7 Te 3 could produce a high device ZT exceeding 1.0 over the whole temperature range of 323–523 K and an efficiency up to 9%. The present work demonstrates a method for synthesizing high‐efficiency porous thermoelectric materials through an unconventional melt‐centrifugation technique.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bruggeman, D. A. G. (1935) · Annalen der Physik · doi:10.1002/andp.19354160705 · Cited by 8,645
Cited by
The Thermoelectric Properties of Bismuth Telluride
Witting, I. T., Chasapis, T. C., Ricci, F., Peters, M., Heinz, N. A., Hautier, G., & Snyder, G. J. (2019) · Advanced Electronic Materials · doi:10.1002/aelm.201800904 · Cited by 834
Self-citationDefect engineering in thermoelectric materials: what have we learned?
Zheng, Y., Slade, T. J., Hu, L., Tan, X. Y., Luo, Y., Luo, Z.-Z., Xu, J., Yan, Q., & Kanatzidis, M. G. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00347j · Cited by 482
Chalcogenide Thermoelectrics Empowered by an Unconventional Bonding Mechanism
Yu, Y., Cagnoni, M., Cojocaru‐Mirédin, O., & Wuttig, M. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201904862 · Cited by 272
Metadata
- Authors
- Pan, Y., Aydemir, U., Grovogui, J. A., Witting, I. T., Hanus, R., Xu, Y., Wu, J., Wu, C., Sun, F., Zhuang, H., Dong, J., Li, J., Dravid, V. P., & Snyder, G. J.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2018-07-08
- Volume
- 30
- Issue
- 34
- Pages
- e1802016-e1802016
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2840822453
- Cited by
- 195
- References
- 1
- FWCI
- 8.13
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.