The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Printable Fabrication of a Fully Integrated and Self‐Powered Sensor System on Plastic Substrates
Abstract
Wearable and portable devices with desirable flexibility, operational safety, and long cruising time, are in urgent demand for applications in wireless communications, multifunctional entertainments, personal healthcare monitoring, etc. Herein, a monolithically integrated self‐powered smart sensor system with printed interconnects, printed gas sensor for ethanol and acetone detection, and printable supercapacitors and embedded solar cells as energy sources, is successfully demonstrated in a wearable wristband fashion by utilizing inkjet printing as a proof‐of‐concept. In such a “wearable wristband”, the harvested solar energy can either directly drive the sensor and power up a light‐emitting diode as a warning signal, or can be stored in the supercapacitors in a standby mode, and the energy released from supercapacitors can compensate the intermittency of light illumination. To the best of our knowledge, the demonstration of such a self‐powered sensor system integrated onto a single piece of flexible substrate in a printable and additive manner has not previously been reported. Particularly, the printable supercapacitors deliver an areal capacitance of 12.9 mF cm−2 and the printed SnO 2 gas sensor shows remarkable detection sensitivity under room temperature. The printable strategies for device fabrication and system integration developed here show great potency for scalable and facile fabrication of a variety of wearable devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fully integrated wearable sensor arrays for multiplexed in situ perspiration analysis
Gao, W., Emaminejad, S., Nyein, H. Y. Y., Challa, S., Chen, K., Peck, A., Fahad, H. M., Ota, H., Shiraki, H., Kiriya, D., et al. (2016) · Nature · doi:10.1038/nature16521 · Cited by 5,087
Bariya, M., Nyein, H. Y. Y., & Javey, A. (2018) · Nature Electronics · doi:10.1038/s41928-018-0043-y · Cited by 1,486
Sustainably powering wearable electronics solely by biomechanical energy
Wang, J., Li, S., Yi, F., Zi, Y., Lin, J., Wang, X., Xu, Y., & Wang, Z. L. (2016) · Nature Communications · doi:10.1038/ncomms12744 · Cited by 648
Roll-to-Roll Gravure Printed Electrochemical Sensors for Wearable and Medical Devices
Bariya, M., Shahpar, Z., Park, H., Sun, J., Jung, Y., Gao, W., Nyein, H. Y. Y., Liaw, T. S., Tai, L.-C., Ngo, Q. P., et al. (2018) · ACS Nano · doi:10.1021/acsnano.8b02505 · Cited by 417
Epidermal Biofuel Cells: Energy Harvesting from Human Perspiration
Jia, W., Valdés‐Ramírez, G., Bandodkar, A. J., Windmiller, J. R., & Wang, J. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201302922 · Cited by 324
Cited by
Technology Roadmap for Flexible Sensors
Luo, Y., Abidian, M. R., Ahn, J.-H., Akinwande, D., Andrews, A. M., Antonietti, M., Bao, Z., Berggren, M., Berkey, C. A., Bettinger, C. J., et al. (2023) · ACS Nano · doi:10.1021/acsnano.2c12606 · Cited by 1,383
Self-citationShi, Q., Dong, B., He, T., Sun, Z., Zhu, J., Zhang, Z., & Lee, C. (2020) · InfoMat · doi:10.1002/inf2.12122 · Cited by 661
Semiconductor Gas Sensors: Materials, Technology, Design, and Application
Nikolic, M. V., Milovanovic, V., Vasiljevic, Z. Z., & Stamenkovic, Z. (2020) · Sensors · doi:10.3390/s20226694 · Cited by 590
Huang, J., Xie, Y., You, Y., Yuan, J., Xu, Q., Xie, H., & Chen, Y. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202213095 · Cited by 448
The Evolution of Flexible Electronics: From Nature, Beyond Nature, and To Nature
Wang, P., Hu, M., Wang, H., Chen, Z., Feng, Y., Wang, J., Ling, W., & Huang, Y. (2020) · Advanced Science · doi:10.1002/advs.202001116 · Cited by 397
Metadata
- Authors
- Lin, Y., Chen, J., Tavakoli, M. M., Gao, Y., Zhu, Y., Zhang, D., Kam, M., He, Z., & Fan, Z.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2018-12-06
- Volume
- 31
- Issue
- 5
- Pages
- e1804285-e1804285
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2903184184
- Cited by
- 210
- References
- 5
- FWCI
- 8.66
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.