The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Lowering the Schottky Barrier Height by Graphene/Ag Electrodes for High‐Mobility MoS2 Field‐Effect Transistors
Abstract
2D transition metal dichalcogenides (TMDCs) have emerged as promising candidates for post‐silicon nanoelectronics owing to their unique and outstanding semiconducting properties. However, contact engineering for these materials to create high‐performance devices while adapting for large‐area fabrication is still in its nascent stages. In this study, graphene/Ag contacts are introduced into MoS 2 devices, for which a graphene film synthesized by chemical vapor deposition (CVD) is inserted between a CVD‐grown MoS 2 film and a Ag electrode as an interfacial layer. The MoS 2 field‐effect transistors with graphene/Ag contacts show improved electrical and photoelectrical properties, achieving a field‐effect mobility of 35 cm 2 V−1 s−1, an on/off current ratio of 4 × 10 8, and a photoresponsivity of 2160 A W−1, compared to those of devices with conventional Ti/Au contacts. These improvements are attributed to the low work function of Ag and the tunability of graphene Fermi level; the n‐doping of Ag in graphene decreases its Fermi level, thereby reducing the Schottky barrier height and contact resistance between the MoS 2 and electrodes. This demonstration of contact interface engineering with CVD‐grown MoS 2 and graphene is a key step toward the practical application of atomically thin TMDC‐based devices with low‐resistance contacts for high‐performance large‐area electronics and optoelectronics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electronics and optoelectronics of two-dimensional transition metal dichalcogenides
Wang, Q. H., Kalantar-Zadeh, K., Kis, A., Coleman, J. N., & Strano, M. S. (2012) · Nature Nanotechnology · doi:10.1038/nnano.2012.193 · Cited by 16,374
Cited by
Ultralow contact resistance between semimetal and monolayer semiconductors
Shen, P.-C., Su, C., Lin, Y., Chou, A.-S., Cheng, C.-C., Park, J.-H., Chiu, M.-H., Lu, A.-Y., Tang, H.-L., Tavakoli, M. M., et al. (2021) · Nature · doi:10.1038/s41586-021-03472-9 · Cited by 1,402
Recent Progress on Two-Dimensional Materials
Chang, C., Chen, W., Chen, Y., Chen, Y., Chen, Y., Ding, F., Fan, C., Jin Fan, H., Fan, Z., Gong, C., et al. (2021) · Acta Physico Chimica Sinica · doi:10.3866/pku.whxb202108017 · Cited by 472
Nalwa, H. S. (2020) · RSC Advances · doi:10.1039/d0ra03183f · Cited by 372
Metadata
- Authors
- Chee, S., Seo, D., Kim, H., Jang, H., Lee, S., Moon, S. P., Lee, K. H., Kim, S. W., Choi, H., & Ham, M.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2018-11-09
- Volume
- 31
- Issue
- 2
- Pages
- e1804422-e1804422
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2900250442
- Cited by
- 248
- References
- 1
- FWCI
- 7.23
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Lowering the Schottky Barrier Height by Graphene/Ag Electrodes for High‐Mobility MoS2 Field‐Effect Transistors. https://app.cochat.ai/papers/10.1002/adma.201804422
- The paper
- Chee, S., Seo, D., Kim, H., Jang, H., Lee, S., Moon, S. P., Lee, K. H., Kim, S. W., Choi, H., & Ham, M. (2019). Lowering the Schottky Barrier Height by Graphene/Ag Electrodes for High‐Mobility MoS2 Field‐Effect Transistors. Advanced Materials. https://doi.org/10.1002/adma.201804422
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.