The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Grain‐Boundary‐Induced Drastic Sensing Performance Enhancement of Polycrystalline‐Microwire Printed Gas Sensors
Abstract
The development of materials with high efficiency and stable signal output in a bent state is important for flexible electronics. Grain boundaries provide lasting inspiration and a promising avenue for designing advanced functionalities using nanomaterials. Combining bulk defects in polycrystalline materials is shown to result in rich new electronic structures, catalytic activities, and mechanical properties for many applications. However, direct evidence that grain boundaries can create new physicochemical properties in flexible electronics is lacking. Here, a combination of bulk electrosensitive measurements, density functional theory calculations, and atomic force microscopy technology with quantitative nanomechanical mapping is used to show that grain boundaries in polycrystalline wires are more active and mechanically stable than single‐crystalline wires for real‐time detection of chemical analytes. The existence of a grain boundary improves the electronic and mechanical properties, which activate and stabilize materials, and allow new opportunities to design highly sensitive, flexible chemical sensors.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Metallic Ti3C2T x MXene Gas Sensors with Ultrahigh Signal-to-Noise Ratio
Kim, S. J., Koh, H.-J., Ren, C. E., Kwon, O., Maleski, K., Cho, S.-Y., Anasori, B., Kim, C.-K., Choi, Y.-K., Kim, J., et al. (2018) · ACS Nano · doi:10.1021/acsnano.7b07460 · Cited by 1,699
Selective increase in CO 2 electroreduction activity at grain-boundary surface terminations
Mariano, R. G., McKelvey, K., White, H. S., & Kanan, M. W. (2017) · Science · doi:10.1126/science.aao3691 · Cited by 818
Grain Boundaries and Dislocations
Van Swygenhoven, H. (2002) · Science · doi:10.1126/science.1071040 · Cited by 656
Probing the Active Surface Sites for CO Reduction on Oxide-Derived Copper Electrocatalysts
Verdaguer-Casadevall, A., Li, C. W., Johansson, T. P., Scott, S. B., McKeown, J. T., Kumar, M., Stephens, I. E. L., Kanan, M. W., & Chorkendorff, I. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b06227 · Cited by 645
Cited by
Wearable Sensors‐Enabled Human–Machine Interaction Systems: From Design to Application
Yin, R., Wang, D., Zhao, S., Lou, Z., & Shen, G. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202008936 · Cited by 769
Self-citationHigh‐performance flexible sensing devices based on polyaniline/MXene nanocomposites
Zhao, L., Wang, K., Wei, W., Wang, L., & Han, W. (2019) · InfoMat · doi:10.1002/inf2.12032 · Cited by 420
Self-citationWang, K., Lou, Z., Wang, L., Zhao, L., Zhao, S., Wang, D., Han, W., Jiang, K., & Shen, G. (2019) · ACS Nano · doi:10.1021/acsnano.9b03454 · Cited by 413
Self-citationReviews of wearable healthcare systems: Materials, devices and system integration
Lou, Z., Wang, L., Jiang, K., Wei, Z., & Shen, G. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2019.100523 · Cited by 385
Self-citationWang, B., Thukral, A., Xie, Z., Liu, L., Zhang, X., Huang, W., Yu, X., Yu, C., Marks, T. J., & Facchetti, A. (2020) · Nature Communications · doi:10.1038/s41467-020-16268-8 · Cited by 338
Metadata
- Authors
- Wang, L., Chen, S., Li, W., Wang, K., Lou, Z., & Shen, G.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2018-11-28
- Volume
- 31
- Issue
- 4
- Pages
- e1804583-e1804583
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2902584558
- Cited by
- 163
- References
- 4
- FWCI
- 10.07
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.