The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
In Situ Li3PS4 Solid‐State Electrolyte Protection Layers for Superior Long‐Life and High‐Rate Lithium‐Metal Anodes
Abstract
A thin and adjustable Li 3 PS 4 (LPS) solid‐state electrolyte protection layer on the surface of Li is proposed to address the dynamic plating/stripping process of Li metal. The LPS interlayer is formed by an in situ and self‐limiting reaction between P 4 S 16 and Li in N‐methyl‐2‐pyrrolidone. By increasing the concentration of P 4 S 16, the thickness of the LPS layer can be adjusted up to 60 nm. Due to the high ionic conductivity and low electrochemical activity of Li 3 PS 4, the intimate protection layer of LPS can not only prevent the formation of Li dendrites, but also reduces parasitic side reactions and improves the electrochemical performance. As a result, symmetric cells with the LPS protection layer can deliver stable Li plating/stripping for 2000 h. Full cells assembled with the LPS‐protected Li exhibit two times higher capacity retention in Li–S batteries (≈800 mAh g−1) at 5 A g−1 for over 400 cycles compared to their bare Li counterparts. Furthermore, high rate performances can be achieved with Li‐LPS/LiCoO 2 cells, which are capable of cycling at rates as high as 20 C. This innovative and scalable approach to stabilizing the Li anode can serve as a basis for the development of next‐generation high‐performance lithium‐metal batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
High rate and stable cycling of lithium metal anode
Qian, J., Henderson, W. A., Xu, W., Bhattacharya, P., Engelhard, M., Borodin, O., & Zhang, J.-G. (2015) · Nature Communications · doi:10.1038/ncomms7362 · Cited by 2,561
Cited by
An aqueous hybrid electrolyte for low-temperature zinc-based energy storage devices
Chang, N., Li, T., Li, R., Wang, S., Yin, Y., Zhang, H., & Li, X. (2020) · Energy & Environmental Science · doi:10.1039/d0ee01538e · Cited by 810
Self-citationProgress and perspectives on halide lithium conductors for all-solid-state lithium batteries
Li, X., Liang, J., Yang, X., Adair, K. R., Wang, C., Zhao, F., & Sun, X. (2020) · Energy & Environmental Science · doi:10.1039/c9ee03828k · Cited by 755
Self-citationLithium Metal Anodes with Nonaqueous Electrolytes
Zhang, J.-G., Xu, W., Xiao, J., Cao, X., & Liu, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00275 · Cited by 730
Toward Critical Electrode/Electrolyte Interfaces in Rechargeable Batteries
Yan, C., Xu, R., Xiao, Y., Ding, J., Xu, L., Li, B., & Huang, J. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909887 · Cited by 510
Wang, C., Liang, J., Zhao, Y., Zheng, M., Li, X., & Sun, X. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00551k · Cited by 489
Self-citation
Metadata
- Authors
- Liang, J., Li, X., Zhao, Y., Goncharova, L. V., Wang, G., Adair, K. R., Wang, C., Li, R., Zhu, Y., Qian, Y., Zhang, L., Yang, R., Lu, S., & Sun, X.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2018-10
- Volume
- 30
- Issue
- 45
- Pages
- e1804684-e1804684
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2895629147
- Cited by
- 181
- References
- 2
- FWCI
- 9.03
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.