The DOI matches its Crossref record; 110 of the 110 references it cites were found in a registry or an index.
Recent Development of Printed Micro‐Supercapacitors: Printable Materials, Printing Technologies, and Perspectives
Abstract
The rapid progression of portable and wearable electronics has necessitated the development of high‐performing, miniaturized energy‐storage devices with flexible form factors and high energy and power delivery. Printed micro‐supercapacitors (MSCs), with in‐plane interdigital configurations, is touted as a promising choice to fulfill these requirements. New printing technologies can assemble MSCs with fiscal and environmental benefits, large form factors, and at high throughputs, qualities not afforded with conventional microfabrication technologies. Here, recent progress in the preparation of functional ink systems for wearable MSCs, encompassing electrode materials, conductor materials, and electrolytes, is presented. First, a comprehensive background of the fundamentals of printing technology is introduced, with discussions focusing on methods of improving ink functionality while simultaneously retaining good printability. Second, various printing techniques to ensure manufacturable scaling of wearable MSCs with high areal electrochemical performance and small footprint are explored. Within the scope of these two topics, various issues that hinder the full materialization of widespread adoption of printed MSC and next steps to overcome these issues are discussed. Further deep dives in scientific and technical challenges are also presented, including limited functionality of the inks, low printing resolution, overlay accuracy, and complex encapsulation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Preparation of Graphitic Oxide
Hummers, W. S., & Offeman, R. E. (1958) · Journal of the American Chemical Society · doi:10.1021/ja01539a017 · Cited by 29,920
Materials for electrochemical capacitors
Simon, P., & Gogotsi, Y. (2008) · Nature Materials · doi:10.1038/nmat2297 · Cited by 16,427
A review of electrode materials for electrochemical supercapacitors
Wang, G., Zhang, L., & Zhang, J. (2012) · Chem. Soc. Rev. · doi:10.1039/c1cs15060j · Cited by 9,152
2D metal carbides and nitrides (MXenes) for energy storage
Anasori, B., Lukatskaya, M. R., & Gogotsi, Y. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.98 · Cited by 7,440
Conductive two-dimensional titanium carbide ‘clay’ with high volumetric capacitance
Ghidiu, M., Lukatskaya, M. R., Zhao, M.-Q., Gogotsi, Y., & Barsoum, M. W. (2014) · Nature · doi:10.1038/nature13970 · Cited by 5,997
Pseudocapacitive oxide materials for high-rate electrochemical energy storage
Augustyn, V., Simon, P., & Dunn, B. (2014) · Energy & Environmental Science · doi:10.1039/c3ee44164d · Cited by 5,575
Cation Intercalation and High Volumetric Capacitance of Two-Dimensional Titanium Carbide
Lukatskaya, M. R., Mashtalir, O., Ren, C. E., Dall’Agnese, Y., Rozier, P., Taberna, P. L., Naguib, M., Simon, P., Barsoum, M. W., & Gogotsi, Y. (2013) · Science · doi:10.1126/science.1241488 · Cited by 4,320
Ultrahigh-power micrometre-sized supercapacitors based on onion-like carbon
Pech, D., Brunet, M., Durou, H., Huang, P., Mochalin, V., Gogotsi, Y., Taberna, P.-L., & Simon, P. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2010.162 · Cited by 2,721
Georgakilas, V., Tiwari, J. N., Kemp, K. C., Perman, J. A., Bourlinos, A. B., Kim, K. S., & Zboril, R. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00620 · Cited by 2,494
Ultra-high-rate pseudocapacitive energy storage in two-dimensional transition metal carbides
Lukatskaya, M. R., Kota, S., Lin, Z., Zhao, M.-Q., Shpigel, N., Levi, M. D., Halim, J., Taberna, P.-L., Barsoum, M. W., Simon, P., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.105 · Cited by 2,335
Cited by
MXene Printing and Patterned Coating for Device Applications
Zhang, Y., Wang, Y., Jiang, Q., El‐Demellawi, J. K., Kim, H., & Alshareef, H. N. (2020) · Advanced Materials · doi:10.1002/adma.201908486 · Cited by 449
Huang, J., Xie, Y., You, Y., Yuan, J., Xu, Q., Xie, H., & Chen, Y. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202213095 · Cited by 448
Orangi, J., Hamade, F., Davis, V. A., & Beidaghi, M. (2020) · ACS Nano · doi:10.1021/acsnano.9b07325 · Cited by 443
Review of MXene electrochemical microsupercapacitors
Jiang, Q., Lei, Y., Liang, H., Xi, K., Xia, C., & Alshareef, H. N. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.01.018 · Cited by 397
Advanced carbon nanomaterials for state-of-the-art flexible supercapacitors
Xie, P., Yuan, W., Liu, X., Peng, Y., Yin, Y., Li, Y., & Wu, Z. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2020.12.011 · Cited by 386
Metadata
- Authors
- Li, H., & Liang, J.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2019-04-03
- Volume
- 32
- Issue
- 3
- Pages
- e1805864-e1805864
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2933883966
- Cited by
- 263
- References
- 110
- FWCI
- 9.33
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Recent Development of Printed Micro‐Supercapacitors: Printable Materials, Printing Technologies, and Perspectives. https://app.cochat.ai/papers/10.1002/adma.201805864
- The paper
- Li, H., & Liang, J. (2020). Recent Development of Printed Micro‐Supercapacitors: Printable Materials, Printing Technologies, and Perspectives. Advanced Materials. https://doi.org/10.1002/adma.201805864
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.