The DOI matches its Crossref record; 118 of the 118 references it cites were found in a registry or an index.
Paving the Path toward Reliable Cathode Materials for Aluminum‐Ion Batteries
Abstract
Aluminum metal is a high‐energy‐density carrier with low cost, and thus endows rechargeable aluminum batteries (RABs) with the potential to act as an inexpensive and efficient electrochemical device, so as to supplement the increasing demand for energy storage and conversion. Despite the enticing aspects regarding cost and energy density, the poor reversibility of electrodes has limited the pursuit of RABs for a long time. Fortunately, ionic‐liquid electrolytes enable reversible aluminum plating/stripping at room temperature, and they lay the very foundation of RABs. In order to integrate with the aluminum‐metal anode, the selection of the cathode is pivotal, but is limited at present. The scant option of a reliable cathode can be accounted for by the intrinsic high charge density of Al 3+ ions, which results in sluggish diffusion. Hence, reliable cathode materials are a key challenge of burgeoning RABs. Herein, the main focus is on the insertion cathodes for RABs also termed aluminum‐ion batteries, and the recent progress and optimization methods are summarized. Finally, an outlook is presented to navigate the possible future work.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Electronics and optoelectronics of two-dimensional transition metal dichalcogenides
Wang, Q. H., Kalantar-Zadeh, K., Kis, A., Coleman, J. N., & Strano, M. S. (2012) · Nature Nanotechnology · doi:10.1038/nnano.2012.193 · Cited by 16,374
The chemistry of two-dimensional layered transition metal dichalcogenide nanosheets
Chhowalla, M., Shin, H. S., Eda, G., Li, L.-J., Loh, K. P., & Zhang, H. (2013) · Nature Chemistry · doi:10.1038/nchem.1589 · Cited by 10,034
Electrolytes and Interphases in Li-Ion Batteries and Beyond
Xu, K. (2014) · Chemical Reviews · doi:10.1021/cr500003w · Cited by 5,566
Ionic-liquid materials for the electrochemical challenges of the future
Armand, M., Endres, F., MacFarlane, D. R., Ohno, H., & Scrosati, B. (2009) · Nature Materials · doi:10.1038/nmat2448 · Cited by 4,619
Liquid Exfoliation of Layered Materials
Nicolosi, V., Chhowalla, M., Kanatzidis, M. G., Strano, M. S., & Coleman, J. N. (2013) · Science · doi:10.1126/science.1226419 · Cited by 3,796
Insertion Electrode Materials for Rechargeable Lithium Batteries
Winter, M., Besenhard, J. O., Spahr, M. E., & Novák, P. (1998) · Advanced Materials · doi:10.1002/(sici)1521-4095(199807)10:10<725::aid-adma725>3.0.co;2-z · Cited by 2,965
An ultrafast rechargeable aluminium-ion battery
Lin, M.-C., Gong, M., Lu, B., Wu, Y., Wang, D.-Y., Guan, M., Angell, M., Chen, C., Yang, J., Hwang, B.-J., et al. (2015) · Nature · doi:10.1038/nature14340 · Cited by 2,491
Oxygen vacancies enhance pseudocapacitive charge storage properties of MoO3−x
Kim, H.-S., Cook, J. B., Lin, H., Ko, J. S., Tolbert, S. H., Ozolins, V., & Dunn, B. (2017) · Nature Materials · doi:10.1038/nmat4810 · Cited by 2,166
Cited by
Transition metal based battery-type electrodes in hybrid supercapacitors: A review
Liu, H., Liu, X., Wang, S., Liu, H.-K., & Li, L. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.03.003 · Cited by 710
Hong, H., Liu, J., Huang, H., Atangana Etogo, C., Yang, X., Guan, B., & Zhang, L. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b06957 · Cited by 334
Zhao, J., Ren, H., Liang, Q., Yuan, D., Xi, S., Wu, C., Manalastas, W., Ma, J., Fang, W., Zheng, Y., et al. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.05.010 · Cited by 264
Self-citationRecent advances in developing organic electrode materials for multivalent rechargeable batteries
Qin, K., Huang, J., Holguin, K., & Luo, C. (2020) · Energy & Environmental Science · doi:10.1039/d0ee02111c · Cited by 256
Metadata
- Authors
- Wu, F., Yang, H., Bai, Y., & Wu, C.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2019-02-15
- Volume
- 31
- Issue
- 16
- Pages
- e1806510-e1806510
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2913382604
- Cited by
- 332
- References
- 118
- FWCI
- 16.74
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Paving the Path toward Reliable Cathode Materials for Aluminum‐Ion Batteries. https://app.cochat.ai/papers/10.1002/adma.201806510
- The paper
- Wu, F., Yang, H., Bai, Y., & Wu, C. (2019). Paving the Path toward Reliable Cathode Materials for Aluminum‐Ion Batteries. Advanced Materials. https://doi.org/10.1002/adma.201806510
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.